#define SA56004_REG_R_LOCAL_TEMPL 0x22
-#define LM90_DEF_CONVRATE_RVAL 6 /* Def conversion rate register value */
#define LM90_MAX_CONVRATE_MS 16000 /* Maximum conversion rate in ms */
/* TMP451 registers */
struct lm90_data {
struct i2c_client *client;
- struct device *hwmon_dev;
const struct attribute_group *groups[6];
struct mutex update_lock;
- struct regulator *regulator;
- char valid; /* zero until following fields are valid */
+ bool valid; /* true if register values are valid */
unsigned long last_updated; /* in jiffies */
int kind;
u32 flags;
* because we don't want the address pointer to change between the write
* byte and the read byte transactions.
*/
-static int lm90_read_reg(struct i2c_client *client, u8 reg, u8 *value)
+static int lm90_read_reg(struct i2c_client *client, u8 reg)
{
int err;
} else
err = i2c_smbus_read_byte_data(client, reg);
- if (err < 0) {
- dev_warn(&client->dev, "Register %#02x read failed (%d)\n",
- reg, err);
- return err;
- }
- *value = err;
-
- return 0;
+ return err;
}
-static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
+static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl)
{
- int err;
- u8 oldh, newh, l;
+ int oldh, newh, l;
/*
* There is a trick here. We have to read two registers to have the
* we have to read the low byte again, and now we believe we have a
* correct reading.
*/
- if ((err = lm90_read_reg(client, regh, &oldh))
- || (err = lm90_read_reg(client, regl, &l))
- || (err = lm90_read_reg(client, regh, &newh)))
- return err;
+ oldh = lm90_read_reg(client, regh);
+ if (oldh < 0)
+ return oldh;
+ l = lm90_read_reg(client, regl);
+ if (l < 0)
+ return l;
+ newh = lm90_read_reg(client, regh);
+ if (newh < 0)
+ return newh;
if (oldh != newh) {
- err = lm90_read_reg(client, regl, &l);
- if (err)
- return err;
+ l = lm90_read_reg(client, regl);
+ if (l < 0)
+ return l;
}
- *value = (newh << 8) | l;
-
- return 0;
+ return (newh << 8) | l;
}
/*
* various registers have different meanings as a result of selecting a
* non-default remote channel.
*/
-static inline void lm90_select_remote_channel(struct i2c_client *client,
- struct lm90_data *data,
- int channel)
+static inline int lm90_select_remote_channel(struct i2c_client *client,
+ struct lm90_data *data,
+ int channel)
{
- u8 config;
+ int config;
if (data->kind == max6696) {
- lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
+ config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
+ if (config < 0)
+ return config;
config &= ~0x08;
if (channel)
config |= 0x08;
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
config);
}
+ return 0;
}
/*
data->update_interval = DIV_ROUND_CLOSEST(update_interval, 64);
}
+static int lm90_update_limits(struct device *dev)
+{
+ struct lm90_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int val;
+
+ val = lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT);
+ if (val < 0)
+ return val;
+ data->temp8[LOCAL_CRIT] = val;
+
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT);
+ if (val < 0)
+ return val;
+ data->temp8[REMOTE_CRIT] = val;
+
+ val = lm90_read_reg(client, LM90_REG_R_TCRIT_HYST);
+ if (val < 0)
+ return val;
+ data->temp_hyst = val;
+
+ lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH);
+ if (val < 0)
+ return val;
+ data->temp11[REMOTE_LOW] = val << 8;
+
+ if (data->flags & LM90_HAVE_REM_LIMIT_EXT) {
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL);
+ if (val < 0)
+ return val;
+ data->temp11[REMOTE_LOW] |= val;
+ }
+
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH);
+ if (val < 0)
+ return val;
+ data->temp11[REMOTE_HIGH] = val << 8;
+
+ if (data->flags & LM90_HAVE_REM_LIMIT_EXT) {
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL);
+ if (val < 0)
+ return val;
+ data->temp11[REMOTE_HIGH] |= val;
+ }
+
+ if (data->flags & LM90_HAVE_OFFSET) {
+ val = lm90_read16(client, LM90_REG_R_REMOTE_OFFSH,
+ LM90_REG_R_REMOTE_OFFSL);
+ if (val < 0)
+ return val;
+ data->temp11[REMOTE_OFFSET] = val;
+ }
+
+ if (data->flags & LM90_HAVE_EMERGENCY) {
+ val = lm90_read_reg(client, MAX6659_REG_R_LOCAL_EMERG);
+ if (val < 0)
+ return val;
+ data->temp8[LOCAL_EMERG] = val;
+
+ val = lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG);
+ if (val < 0)
+ return val;
+ data->temp8[REMOTE_EMERG] = val;
+ }
+
+ if (data->kind == max6696) {
+ val = lm90_select_remote_channel(client, data, 1);
+ if (val < 0)
+ return val;
+
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT);
+ if (val < 0)
+ return val;
+ data->temp8[REMOTE2_CRIT] = val;
+
+ val = lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG);
+ if (val < 0)
+ return val;
+ data->temp8[REMOTE2_EMERG] = val;
+
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH);
+ if (val < 0)
+ return val;
+ data->temp11[REMOTE2_LOW] = val << 8;
+
+ val = lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH);
+ if (val < 0)
+ return val;
+ data->temp11[REMOTE2_HIGH] = val << 8;
+
+ lm90_select_remote_channel(client, data, 0);
+ }
+
+ return 0;
+}
+
static struct lm90_data *lm90_update_device(struct device *dev)
{
struct lm90_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
unsigned long next_update;
+ int val = 0;
mutex_lock(&data->update_lock);
+ if (!data->valid) {
+ val = lm90_update_limits(dev);
+ if (val < 0)
+ goto error;
+ }
+
next_update = data->last_updated +
msecs_to_jiffies(data->update_interval);
if (time_after(jiffies, next_update) || !data->valid) {
- u8 h, l;
- u8 alarms;
-
dev_dbg(&client->dev, "Updating lm90 data.\n");
- lm90_read_reg(client, LM90_REG_R_LOCAL_LOW,
- &data->temp8[LOCAL_LOW]);
- lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH,
- &data->temp8[LOCAL_HIGH]);
- lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT,
- &data->temp8[LOCAL_CRIT]);
- lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
- &data->temp8[REMOTE_CRIT]);
- lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
+
+ data->valid = false;
+
+ val = lm90_read_reg(client, LM90_REG_R_LOCAL_LOW);
+ if (val < 0)
+ goto error;
+ data->temp8[LOCAL_LOW] = val;
+
+ val = lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH);
+ if (val < 0)
+ goto error;
+ data->temp8[LOCAL_HIGH] = val;
if (data->reg_local_ext) {
- lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
- data->reg_local_ext,
- &data->temp11[LOCAL_TEMP]);
+ val = lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
+ data->reg_local_ext);
+ if (val < 0)
+ goto error;
+ data->temp11[LOCAL_TEMP] = val;
} else {
- if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
- &h) == 0)
- data->temp11[LOCAL_TEMP] = h << 8;
- }
- lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
- LM90_REG_R_REMOTE_TEMPL,
- &data->temp11[REMOTE_TEMP]);
-
- if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h) == 0) {
- data->temp11[REMOTE_LOW] = h << 8;
- if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
- && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL,
- &l) == 0)
- data->temp11[REMOTE_LOW] |= l;
- }
- if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h) == 0) {
- data->temp11[REMOTE_HIGH] = h << 8;
- if ((data->flags & LM90_HAVE_REM_LIMIT_EXT)
- && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL,
- &l) == 0)
- data->temp11[REMOTE_HIGH] |= l;
+ val = lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP);
+ if (val < 0)
+ goto error;
+ data->temp11[LOCAL_TEMP] = val << 8;
}
+ val = lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
+ LM90_REG_R_REMOTE_TEMPL);
+ if (val < 0)
+ goto error;
+ data->temp11[REMOTE_TEMP] = val;
- if (data->flags & LM90_HAVE_OFFSET) {
- if (lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSH,
- &h) == 0
- && lm90_read_reg(client, LM90_REG_R_REMOTE_OFFSL,
- &l) == 0)
- data->temp11[REMOTE_OFFSET] = (h << 8) | l;
- }
- if (data->flags & LM90_HAVE_EMERGENCY) {
- lm90_read_reg(client, MAX6659_REG_R_LOCAL_EMERG,
- &data->temp8[LOCAL_EMERG]);
- lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
- &data->temp8[REMOTE_EMERG]);
- }
- lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
- data->alarms = alarms; /* save as 16 bit value */
+ val = lm90_read_reg(client, LM90_REG_R_STATUS);
+ if (val < 0)
+ goto error;
+ data->alarms = val; /* lower 8 bit of alarms */
if (data->kind == max6696) {
- lm90_select_remote_channel(client, data, 1);
- lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT,
- &data->temp8[REMOTE2_CRIT]);
- lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG,
- &data->temp8[REMOTE2_EMERG]);
- lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
- LM90_REG_R_REMOTE_TEMPL,
- &data->temp11[REMOTE2_TEMP]);
- if (!lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h))
- data->temp11[REMOTE2_LOW] = h << 8;
- if (!lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h))
- data->temp11[REMOTE2_HIGH] = h << 8;
+ val = lm90_select_remote_channel(client, data, 1);
+ if (val < 0)
+ goto error;
+
+ val = lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
+ LM90_REG_R_REMOTE_TEMPL);
+ if (val < 0)
+ goto error;
+ data->temp11[REMOTE2_TEMP] = val;
+
lm90_select_remote_channel(client, data, 0);
- if (!lm90_read_reg(client, MAX6696_REG_R_STATUS2,
- &alarms))
- data->alarms |= alarms << 8;
+ val = lm90_read_reg(client, MAX6696_REG_R_STATUS2);
+ if (val < 0)
+ goto error;
+ data->alarms |= val << 8;
}
/*
* Re-enable ALERT# output if it was originally enabled and
* relevant alarms are all clear
*/
- if ((data->config_orig & 0x80) == 0
- && (data->alarms & data->alert_alarms) == 0) {
- u8 config;
+ if (!(data->config_orig & 0x80) &&
+ !(data->alarms & data->alert_alarms)) {
+ val = lm90_read_reg(client, LM90_REG_R_CONFIG1);
+ if (val < 0)
+ goto error;
- lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
- if (config & 0x80) {
+ if (val & 0x80) {
dev_dbg(&client->dev, "Re-enabling ALERT#\n");
i2c_smbus_write_byte_data(client,
LM90_REG_W_CONFIG1,
- config & ~0x80);
+ val & ~0x80);
}
}
data->last_updated = jiffies;
- data->valid = 1;
+ data->valid = true;
}
+error:
mutex_unlock(&data->update_lock);
+ if (val < 0)
+ return ERR_PTR(val);
+
return data;
}
{
if (data->flags & LM90_FLAG_ADT7461_EXT)
return (val - 64) * 1000;
- else
- return temp_from_s8(val);
+ return temp_from_s8(val);
}
static inline int temp_from_u16_adt7461(struct lm90_data *data, u16 val)
{
if (data->flags & LM90_FLAG_ADT7461_EXT)
return (val - 0x4000) / 64 * 250;
- else
- return temp_from_s16(val);
+ return temp_from_s16(val);
}
static u8 temp_to_u8_adt7461(struct lm90_data *data, long val)
if (val >= 191000)
return 0xFF;
return (val + 500 + 64000) / 1000;
- } else {
- if (val <= 0)
- return 0;
- if (val >= 127000)
- return 127;
- return (val + 500) / 1000;
}
+ if (val <= 0)
+ return 0;
+ if (val >= 127000)
+ return 127;
+ return (val + 500) / 1000;
}
static u16 temp_to_u16_adt7461(struct lm90_data *data, long val)
if (val >= 191750)
return 0xFFC0;
return (val + 64000 + 125) / 250 * 64;
- } else {
- if (val <= 0)
- return 0;
- if (val >= 127750)
- return 0x7FC0;
- return (val + 125) / 250 * 64;
}
+ if (val <= 0)
+ return 0;
+ if (val >= 127750)
+ return 0x7FC0;
+ return (val + 125) / 250 * 64;
}
/*
struct lm90_data *data = lm90_update_device(dev);
int temp;
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
else if (data->kind == max6646)
struct lm90_data *data = lm90_update_device(dev);
int temp;
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
else if (data->kind == max6646)
struct lm90_data *data = lm90_update_device(dev);
int temp;
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
else if (data->kind == max6646)
char *buf)
{
struct lm90_data *data = lm90_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", data->alarms);
}
struct lm90_data *data = lm90_update_device(dev);
int bitnr = attr->index;
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
}
return 0;
}
-static void lm90_restore_conf(struct i2c_client *client, struct lm90_data *data)
+static void lm90_restore_conf(void *_data)
{
+ struct lm90_data *data = _data;
+ struct i2c_client *client = data->client;
+
/* Restore initial configuration */
i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
data->convrate_orig);
data->config_orig);
}
-static void lm90_init_client(struct i2c_client *client, struct lm90_data *data)
+static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
{
- u8 config, convrate;
+ int config, convrate;
- if (lm90_read_reg(client, LM90_REG_R_CONVRATE, &convrate) < 0) {
- dev_warn(&client->dev, "Failed to read convrate register!\n");
- convrate = LM90_DEF_CONVRATE_RVAL;
- }
+ convrate = lm90_read_reg(client, LM90_REG_R_CONVRATE);
+ if (convrate < 0)
+ return convrate;
data->convrate_orig = convrate;
/*
* Start the conversions.
*/
lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
- if (lm90_read_reg(client, LM90_REG_R_CONFIG1, &config) < 0) {
- dev_warn(&client->dev, "Initialization failed!\n");
- return;
- }
+ config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
+ if (config < 0)
+ return config;
data->config_orig = config;
/* Check Temperature Range Select */
config &= 0xBF; /* run */
if (config != data->config_orig) /* Only write if changed */
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
+
+ devm_add_action(&client->dev, lm90_restore_conf, data);
+
+ return 0;
}
static bool lm90_is_tripped(struct i2c_client *client, u16 *status)
{
struct lm90_data *data = i2c_get_clientdata(client);
- u8 st, st2 = 0;
+ int st, st2 = 0;
- lm90_read_reg(client, LM90_REG_R_STATUS, &st);
+ st = lm90_read_reg(client, LM90_REG_R_STATUS);
+ if (st < 0)
+ return false;
- if (data->kind == max6696)
- lm90_read_reg(client, MAX6696_REG_R_STATUS2, &st2);
+ if (data->kind == max6696) {
+ st2 = lm90_read_reg(client, MAX6696_REG_R_STATUS2);
+ if (st2 < 0)
+ return false;
+ }
*status = st | (st2 << 8);
return IRQ_NONE;
}
+static void lm90_remove_pec(void *dev)
+{
+ device_remove_file(dev, &dev_attr_pec);
+}
+
+static void lm90_regulator_disable(void *regulator)
+{
+ regulator_disable(regulator);
+}
+
static int lm90_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(dev->parent);
struct lm90_data *data;
struct regulator *regulator;
+ struct device *hwmon_dev;
int groups = 0;
int err;
return err;
}
+ devm_add_action(dev, lm90_regulator_disable, regulator);
+
data = devm_kzalloc(dev, sizeof(struct lm90_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- data->regulator = regulator;
-
/* Set the device type */
data->kind = id->driver_data;
if (data->kind == adm1032) {
data->max_convrate = lm90_params[data->kind].max_convrate;
/* Initialize the LM90 chip */
- lm90_init_client(client, data);
+ err = lm90_init_client(client, data);
+ if (err < 0) {
+ dev_err(dev, "Failed to initialize device\n");
+ return err;
+ }
/* Register sysfs hooks */
data->groups[groups++] = &lm90_group;
if (client->flags & I2C_CLIENT_PEC) {
err = device_create_file(dev, &dev_attr_pec);
if (err)
- goto exit_restore;
+ return err;
+ devm_add_action(dev, lm90_remove_pec, dev);
}
- data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name,
- data, data->groups);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_pec;
- }
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data, data->groups);
+ if (IS_ERR(hwmon_dev))
+ return PTR_ERR(hwmon_dev);
if (client->irq) {
dev_dbg(dev, "IRQ: %d\n", client->irq);
"lm90", client);
if (err < 0) {
dev_err(dev, "cannot request IRQ %d\n", client->irq);
- goto exit_unregister;
+ return err;
}
}
return 0;
-
-exit_unregister:
- hwmon_device_unregister(data->hwmon_dev);
-exit_remove_pec:
- device_remove_file(dev, &dev_attr_pec);
-exit_restore:
- lm90_restore_conf(client, data);
- regulator_disable(data->regulator);
-
- return err;
-}
-
-static int lm90_remove(struct i2c_client *client)
-{
- struct lm90_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- device_remove_file(&client->dev, &dev_attr_pec);
- lm90_restore_conf(client, data);
- regulator_disable(data->regulator);
-
- return 0;
}
- static void lm90_alert(struct i2c_client *client, unsigned int flag)
+ static void lm90_alert(struct i2c_client *client, enum i2c_alert_protocol type,
+ unsigned int flag)
{
u16 alarms;
+ if (type != I2C_PROTOCOL_SMBUS_ALERT)
+ return;
+
if (lm90_is_tripped(client, &alarms)) {
/*
* Disable ALERT# output, because these chips don't implement
*/
struct lm90_data *data = i2c_get_clientdata(client);
- if ((data->flags & LM90_HAVE_BROKEN_ALERT)
- && (alarms & data->alert_alarms)) {
- u8 config;
+ if ((data->flags & LM90_HAVE_BROKEN_ALERT) &&
+ (alarms & data->alert_alarms)) {
+ int config;
+
dev_dbg(&client->dev, "Disabling ALERT#\n");
- lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
- i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
- config | 0x80);
+ config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
+ if (config >= 0)
+ i2c_smbus_write_byte_data(client,
+ LM90_REG_W_CONFIG1,
+ config | 0x80);
}
} else {
dev_info(&client->dev, "Everything OK\n");
.name = "lm90",
},
.probe = lm90_probe,
- .remove = lm90_remove,
.alert = lm90_alert,
.id_table = lm90_id,
.detect = lm90_detect,
bus_err &= I2C_STATUS_ERROR_MASK;
qup_err &= QUP_STATUS_ERROR_FLAGS;
- if (qup_err) {
- /* Clear Error interrupt */
+ /* Clear the error bits in QUP_ERROR_FLAGS */
+ if (qup_err)
writel(qup_err, qup->base + QUP_ERROR_FLAGS);
- goto done;
- }
- if (bus_err) {
- /* Clear Error interrupt */
+ /* Clear the error bits in QUP_I2C_STATUS */
+ if (bus_err)
+ writel(bus_err, qup->base + QUP_I2C_STATUS);
+
+ /* Reset the QUP State in case of error */
+ if (qup_err || bus_err) {
writel(QUP_RESET_STATE, qup->base + QUP_STATE);
goto done;
}
u32 opflags;
u32 status;
u32 shift = __ffs(op);
+ int ret = 0;
len *= qup->one_byte_t;
/* timeout after a wait of twice the max time */
if (((opflags & op) >> shift) == val) {
if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) {
- if (!(status & I2C_STATUS_BUS_ACTIVE))
- return 0;
+ if (!(status & I2C_STATUS_BUS_ACTIVE)) {
+ ret = 0;
+ goto done;
+ }
} else {
- return 0;
+ ret = 0;
+ goto done;
}
}
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
-
+ if (time_after(jiffies, timeout)) {
+ ret = -ETIMEDOUT;
+ goto done;
+ }
usleep_range(len, len * 2);
}
+
+ done:
+ if (qup->bus_err || qup->qup_err)
+ ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
+
+ return ret;
}
static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup,
}
static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
- struct qup_i2c_tag *tg, unsigned int buflen,
- struct qup_i2c_dev *qup, int map, int dir)
+ unsigned int buflen, struct qup_i2c_dev *qup,
+ int dir)
{
int ret;
if (!ret)
return -EINVAL;
- if (!map)
- sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start);
-
return 0;
}
u8 *tags;
while (idx < num) {
- blocks = (msg->len + limit) / limit;
- rem = msg->len % limit;
tx_len = 0, len = 0, i = 0;
qup->is_last = (idx == (num - 1));
qup_i2c_set_blk_data(qup, msg);
+ blocks = qup->blk.count;
+ rem = msg->len - (blocks - 1) * limit;
+
if (msg->flags & I2C_M_RD) {
rx_nents += (blocks * 2) + 1;
tx_nents += 1;
while (qup->blk.pos < blocks) {
- /* length set to '0' implies 256 bytes */
- tlen = (i == (blocks - 1)) ? rem : 0;
+ tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + len];
len += qup_i2c_set_tags(tags, qup, msg, 1);
+ qup->blk.data_len -= tlen;
/* scratch buf to read the start and len tags */
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&qup->brx.tag.start[0],
- &qup->brx.tag,
- 2, qup, 0, 0);
+ 2, qup, DMA_FROM_DEVICE);
if (ret)
return ret;
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&msg->buf[limit * i],
- NULL, tlen, qup,
- 1, DMA_FROM_DEVICE);
+ tlen, qup,
+ DMA_FROM_DEVICE);
if (ret)
return ret;
}
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&qup->start_tag.start[off],
- &qup->start_tag, len, qup, 0, 0);
+ len, qup, DMA_TO_DEVICE);
if (ret)
return ret;
/* scratch buf to read the BAM EOT and FLUSH tags */
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&qup->brx.tag.start[0],
- &qup->brx.tag, 2,
- qup, 0, 0);
+ 2, qup, DMA_FROM_DEVICE);
if (ret)
return ret;
} else {
tx_nents += (blocks * 2);
while (qup->blk.pos < blocks) {
- tlen = (i == (blocks - 1)) ? rem : 0;
+ tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + tx_len];
len = qup_i2c_set_tags(tags, qup, msg, 1);
+ qup->blk.data_len -= tlen;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
- tags,
- &qup->start_tag, len,
- qup, 0, 0);
+ tags, len,
+ qup, DMA_TO_DEVICE);
if (ret)
return ret;
tx_len += len;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&msg->buf[limit * i],
- NULL, tlen, qup, 1,
- DMA_TO_DEVICE);
+ tlen, qup, DMA_TO_DEVICE);
if (ret)
return ret;
i++;
QUP_BAM_FLUSH_STOP;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&qup->btx.tag.start[0],
- &qup->btx.tag, len,
- qup, 0, 0);
+ len, qup, DMA_TO_DEVICE);
if (ret)
return ret;
tx_nents += 1;
}
if (ret || qup->bus_err || qup->qup_err) {
- if (qup->bus_err & QUP_I2C_NACK_FLAG) {
- msg--;
- dev_err(qup->dev, "NACK from %x\n", msg->addr);
- ret = -EIO;
+ if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
+ dev_err(qup->dev, "change to run state timed out");
+ goto desc_err;
+ }
- if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
- dev_err(qup->dev, "change to run state timed out");
- return ret;
- }
+ if (rx_nents)
+ writel(QUP_BAM_INPUT_EOT,
+ qup->base + QUP_OUT_FIFO_BASE);
- if (rx_nents)
- writel(QUP_BAM_INPUT_EOT,
- qup->base + QUP_OUT_FIFO_BASE);
+ writel(QUP_BAM_FLUSH_STOP, qup->base + QUP_OUT_FIFO_BASE);
- writel(QUP_BAM_FLUSH_STOP,
- qup->base + QUP_OUT_FIFO_BASE);
+ qup_i2c_flush(qup);
- qup_i2c_flush(qup);
+ /* wait for remaining interrupts to occur */
+ if (!wait_for_completion_timeout(&qup->xfer, HZ))
+ dev_err(qup->dev, "flush timed out\n");
- /* wait for remaining interrupts to occur */
- if (!wait_for_completion_timeout(&qup->xfer, HZ))
- dev_err(qup->dev, "flush timed out\n");
+ qup_i2c_rel_dma(qup);
- qup_i2c_rel_dma(qup);
- }
+ ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
}
+ desc_err:
dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE);
if (rx_nents)
dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents,
DMA_FROM_DEVICE);
- desc_err:
+
return ret;
}
if (ret)
goto out;
- qup->bus_err = 0;
- qup->qup_err = 0;
-
writel(0, qup->base + QUP_MX_INPUT_CNT);
writel(0, qup->base + QUP_MX_OUTPUT_CNT);
ret = -ETIMEDOUT;
}
- if (qup->bus_err || qup->qup_err) {
- if (qup->bus_err & QUP_I2C_NACK_FLAG) {
- dev_err(qup->dev, "NACK from %x\n", msg->addr);
- ret = -EIO;
- }
- }
+ if (qup->bus_err || qup->qup_err)
+ ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
return ret;
}
{
u32 addr, len, val;
- addr = (msg->addr << 1) | 1;
+ addr = i2c_8bit_addr_from_msg(msg);
/* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
if (ret < 0)
goto out;
+ qup->bus_err = 0;
+ qup->qup_err = 0;
+
writel(1, qup->base + QUP_SW_RESET);
ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
if (ret)
struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
int ret, len, idx = 0, use_dma = 0;
+ qup->bus_err = 0;
+ qup->qup_err = 0;
+
ret = pm_runtime_get_sync(qup->dev);
if (ret < 0)
goto out;
}
}
+ idx = 0;
+
do {
if (msgs[idx].len == 0) {
ret = -EINVAL;
/* 2 tag bytes for each block + 5 for start, stop tags */
size = blocks * 2 + 5;
- qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev,
- size, 4, 0);
- qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL,
- &qup->start_tag.addr);
+ qup->start_tag.start = devm_kzalloc(&pdev->dev,
+ size, GFP_KERNEL);
if (!qup->start_tag.start) {
ret = -ENOMEM;
goto fail_dma;
}
- qup->brx.tag.start = dma_pool_alloc(qup->dpool,
- GFP_KERNEL,
- &qup->brx.tag.addr);
+ qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
if (!qup->brx.tag.start) {
ret = -ENOMEM;
goto fail_dma;
}
- qup->btx.tag.start = dma_pool_alloc(qup->dpool,
- GFP_KERNEL,
- &qup->btx.tag.addr);
+ qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
if (!qup->btx.tag.start) {
ret = -ENOMEM;
goto fail_dma;
struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
if (qup->is_dma) {
- dma_pool_free(qup->dpool, qup->start_tag.start,
- qup->start_tag.addr);
- dma_pool_free(qup->dpool, qup->brx.tag.start,
- qup->brx.tag.addr);
- dma_pool_free(qup->dpool, qup->btx.tag.start,
- qup->btx.tag.addr);
- dma_pool_destroy(qup->dpool);
dma_release_channel(qup->btx.dma);
dma_release_channel(qup->brx.dma);
}
I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com>
*/
+ #define pr_fmt(fmt) "i2c-core: " fmt
+
#include <dt-bindings/i2c/i2c.h>
#include <asm/uaccess.h>
#include <linux/acpi.h>
acpi_handle device_handle;
};
-static int acpi_i2c_find_address(struct acpi_resource *ares, void *data)
+static int acpi_i2c_fill_info(struct acpi_resource *ares, void *data)
{
struct acpi_i2c_lookup *lookup = data;
struct i2c_board_info *info = lookup->info;
struct acpi_resource_i2c_serialbus *sb;
- acpi_handle adapter_handle;
acpi_status status;
if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
return 1;
- /*
- * Extract the ResourceSource and make sure that the handle matches
- * with the I2C adapter handle.
- */
status = acpi_get_handle(lookup->device_handle,
sb->resource_source.string_ptr,
- &adapter_handle);
- if (ACPI_SUCCESS(status) && adapter_handle == lookup->adapter_handle) {
- info->addr = sb->slave_address;
- if (sb->access_mode == ACPI_I2C_10BIT_MODE)
- info->flags |= I2C_CLIENT_TEN;
- }
+ &lookup->adapter_handle);
+ if (!ACPI_SUCCESS(status))
+ return 1;
+
+ info->addr = sb->slave_address;
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ info->flags |= I2C_CLIENT_TEN;
return 1;
}
-static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
- void *data, void **return_value)
+static int acpi_i2c_get_info(struct acpi_device *adev,
+ struct i2c_board_info *info,
+ acpi_handle *adapter_handle)
{
- struct i2c_adapter *adapter = data;
struct list_head resource_list;
- struct acpi_i2c_lookup lookup;
struct resource_entry *entry;
- struct i2c_board_info info;
- struct acpi_device *adev;
+ struct acpi_i2c_lookup lookup;
int ret;
- if (acpi_bus_get_device(handle, &adev))
- return AE_OK;
- if (acpi_bus_get_status(adev) || !adev->status.present)
- return AE_OK;
+ if (acpi_bus_get_status(adev) || !adev->status.present ||
+ acpi_device_enumerated(adev))
+ return -EINVAL;
- memset(&info, 0, sizeof(info));
- info.fwnode = acpi_fwnode_handle(adev);
+ memset(info, 0, sizeof(*info));
+ info->fwnode = acpi_fwnode_handle(adev);
memset(&lookup, 0, sizeof(lookup));
- lookup.adapter_handle = ACPI_HANDLE(&adapter->dev);
- lookup.device_handle = handle;
- lookup.info = &info;
+ lookup.device_handle = acpi_device_handle(adev);
+ lookup.info = info;
- /*
- * Look up for I2cSerialBus resource with ResourceSource that
- * matches with this adapter.
- */
+ /* Look up for I2cSerialBus resource */
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list,
- acpi_i2c_find_address, &lookup);
+ acpi_i2c_fill_info, &lookup);
acpi_dev_free_resource_list(&resource_list);
- if (ret < 0 || !info.addr)
- return AE_OK;
+ if (ret < 0 || !info->addr)
+ return -EINVAL;
+
+ *adapter_handle = lookup.adapter_handle;
/* Then fill IRQ number if any */
ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
if (ret < 0)
- return AE_OK;
+ return -EINVAL;
resource_list_for_each_entry(entry, &resource_list) {
if (resource_type(entry->res) == IORESOURCE_IRQ) {
- info.irq = entry->res->start;
+ info->irq = entry->res->start;
break;
}
}
acpi_dev_free_resource_list(&resource_list);
+ strlcpy(info->type, dev_name(&adev->dev), sizeof(info->type));
+
+ return 0;
+}
+
+static void acpi_i2c_register_device(struct i2c_adapter *adapter,
+ struct acpi_device *adev,
+ struct i2c_board_info *info)
+{
adev->power.flags.ignore_parent = true;
- strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
- if (!i2c_new_device(adapter, &info)) {
+ acpi_device_set_enumerated(adev);
+
+ if (!i2c_new_device(adapter, info)) {
adev->power.flags.ignore_parent = false;
dev_err(&adapter->dev,
"failed to add I2C device %s from ACPI\n",
dev_name(&adev->dev));
}
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_adapter *adapter = data;
+ struct acpi_device *adev;
+ acpi_handle adapter_handle;
+ struct i2c_board_info info;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+ return AE_OK;
+
+ if (adapter_handle != ACPI_HANDLE(&adapter->dev))
+ return AE_OK;
+
+ acpi_i2c_register_device(adapter, adev, &info);
return AE_OK;
}
dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
}
+static int acpi_i2c_match_adapter(struct device *dev, void *data)
+{
+ struct i2c_adapter *adapter = i2c_verify_adapter(dev);
+
+ if (!adapter)
+ return 0;
+
+ return ACPI_HANDLE(dev) == (acpi_handle)data;
+}
+
+static int acpi_i2c_match_device(struct device *dev, void *data)
+{
+ return ACPI_COMPANION(dev) == data;
+}
+
+static struct i2c_adapter *acpi_i2c_find_adapter_by_handle(acpi_handle handle)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, handle,
+ acpi_i2c_match_adapter);
+ return dev ? i2c_verify_adapter(dev) : NULL;
+}
+
+static struct i2c_client *acpi_i2c_find_client_by_adev(struct acpi_device *adev)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&i2c_bus_type, NULL, adev, acpi_i2c_match_device);
+ return dev ? i2c_verify_client(dev) : NULL;
+}
+
+static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
+ void *arg)
+{
+ struct acpi_device *adev = arg;
+ struct i2c_board_info info;
+ acpi_handle adapter_handle;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ switch (value) {
+ case ACPI_RECONFIG_DEVICE_ADD:
+ if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+ break;
+
+ adapter = acpi_i2c_find_adapter_by_handle(adapter_handle);
+ if (!adapter)
+ break;
+
+ acpi_i2c_register_device(adapter, adev, &info);
+ break;
+ case ACPI_RECONFIG_DEVICE_REMOVE:
+ if (!acpi_device_enumerated(adev))
+ break;
+
+ client = acpi_i2c_find_client_by_adev(adev);
+ if (!client)
+ break;
+
+ i2c_unregister_device(client);
+ put_device(&client->dev);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block i2c_acpi_notifier = {
+ .notifier_call = acpi_i2c_notify,
+};
#else /* CONFIG_ACPI */
static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+extern struct notifier_block i2c_acpi_notifier;
#endif /* CONFIG_ACPI */
#ifdef CONFIG_ACPI_I2C_OPREGION
break;
default:
- pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
+ dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
+ accessor_type, client->addr);
ret = AE_BAD_PARAMETER;
goto err;
}
}
EXPORT_SYMBOL_GPL(i2c_recover_bus);
+ static void i2c_init_recovery(struct i2c_adapter *adap)
+ {
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ char *err_str;
+
+ if (!bri)
+ return;
+
+ if (!bri->recover_bus) {
+ err_str = "no recover_bus() found";
+ goto err;
+ }
+
+ /* Generic GPIO recovery */
+ if (bri->recover_bus == i2c_generic_gpio_recovery) {
+ if (!gpio_is_valid(bri->scl_gpio)) {
+ err_str = "invalid SCL gpio";
+ goto err;
+ }
+
+ if (gpio_is_valid(bri->sda_gpio))
+ bri->get_sda = get_sda_gpio_value;
+ else
+ bri->get_sda = NULL;
+
+ bri->get_scl = get_scl_gpio_value;
+ bri->set_scl = set_scl_gpio_value;
+ } else if (bri->recover_bus == i2c_generic_scl_recovery) {
+ /* Generic SCL recovery */
+ if (!bri->set_scl || !bri->get_scl) {
+ err_str = "no {get|set}_scl() found";
+ goto err;
+ }
+ }
+
+ return;
+ err:
+ dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
+ adap->bus_recovery_info = NULL;
+ }
+
static int i2c_device_probe(struct device *dev)
{
struct i2c_client *client = i2c_verify_client(dev);
{
if (client->dev.of_node)
of_node_clear_flag(client->dev.of_node, OF_POPULATED);
+ if (ACPI_COMPANION(&client->dev))
+ acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
device_unregister(&client->dev);
}
EXPORT_SYMBOL_GPL(i2c_unregister_device);
}
EXPORT_SYMBOL_GPL(i2c_new_dummy);
+ /**
+ * i2c_new_secondary_device - Helper to get the instantiated secondary address
+ * and create the associated device
+ * @client: Handle to the primary client
+ * @name: Handle to specify which secondary address to get
+ * @default_addr: Used as a fallback if no secondary address was specified
+ * Context: can sleep
+ *
+ * I2C clients can be composed of multiple I2C slaves bound together in a single
+ * component. The I2C client driver then binds to the master I2C slave and needs
+ * to create I2C dummy clients to communicate with all the other slaves.
+ *
+ * This function creates and returns an I2C dummy client whose I2C address is
+ * retrieved from the platform firmware based on the given slave name. If no
+ * address is specified by the firmware default_addr is used.
+ *
+ * On DT-based platforms the address is retrieved from the "reg" property entry
+ * cell whose "reg-names" value matches the slave name.
+ *
+ * This returns the new i2c client, which should be saved for later use with
+ * i2c_unregister_device(); or NULL to indicate an error.
+ */
+ struct i2c_client *i2c_new_secondary_device(struct i2c_client *client,
+ const char *name,
+ u16 default_addr)
+ {
+ struct device_node *np = client->dev.of_node;
+ u32 addr = default_addr;
+ int i;
+
+ if (np) {
+ i = of_property_match_string(np, "reg-names", name);
+ if (i >= 0)
+ of_property_read_u32_index(np, "reg", i, &addr);
+ }
+
+ dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
+ return i2c_new_dummy(client->adapter, addr);
+ }
+ EXPORT_SYMBOL_GPL(i2c_new_secondary_device);
+
/* ------------------------------------------------------------------------- */
/* I2C bus adapters -- one roots each I2C or SMBUS segment */
static int i2c_register_adapter(struct i2c_adapter *adap)
{
- int res = 0;
+ int res = -EINVAL;
/* Can't register until after driver model init */
if (WARN_ON(!is_registered)) {
}
/* Sanity checks */
- if (unlikely(adap->name[0] == '\0')) {
- pr_err("i2c-core: Attempt to register an adapter with "
- "no name!\n");
- return -EINVAL;
- }
- if (unlikely(!adap->algo)) {
- pr_err("i2c-core: Attempt to register adapter '%s' with "
- "no algo!\n", adap->name);
- return -EINVAL;
+ if (WARN(!adap->name[0], "i2c adapter has no name"))
+ goto out_list;
+
+ if (!adap->algo) {
+ pr_err("adapter '%s': no algo supplied!\n", adap->name);
+ goto out_list;
}
if (!adap->lock_bus) {
adap->dev.bus = &i2c_bus_type;
adap->dev.type = &i2c_adapter_type;
res = device_register(&adap->dev);
- if (res)
+ if (res) {
+ pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
goto out_list;
+ }
dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
"Failed to create compatibility class link\n");
#endif
- /* bus recovery specific initialization */
- if (adap->bus_recovery_info) {
- struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
-
- if (!bri->recover_bus) {
- dev_err(&adap->dev, "No recover_bus() found, not using recovery\n");
- adap->bus_recovery_info = NULL;
- goto exit_recovery;
- }
-
- /* Generic GPIO recovery */
- if (bri->recover_bus == i2c_generic_gpio_recovery) {
- if (!gpio_is_valid(bri->scl_gpio)) {
- dev_err(&adap->dev, "Invalid SCL gpio, not using recovery\n");
- adap->bus_recovery_info = NULL;
- goto exit_recovery;
- }
+ i2c_init_recovery(adap);
- if (gpio_is_valid(bri->sda_gpio))
- bri->get_sda = get_sda_gpio_value;
- else
- bri->get_sda = NULL;
-
- bri->get_scl = get_scl_gpio_value;
- bri->set_scl = set_scl_gpio_value;
- } else if (bri->recover_bus == i2c_generic_scl_recovery) {
- /* Generic SCL recovery */
- if (!bri->set_scl || !bri->get_scl) {
- dev_err(&adap->dev, "No {get|set}_scl() found, not using recovery\n");
- adap->bus_recovery_info = NULL;
- }
- }
- }
-
- exit_recovery:
/* create pre-declared device nodes */
of_i2c_register_devices(adap);
acpi_i2c_register_devices(adap);
*/
static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
{
- int id;
+ int id;
mutex_lock(&core_lock);
- id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1,
- GFP_KERNEL);
+ id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
mutex_unlock(&core_lock);
- if (id < 0)
+ if (WARN(id < 0, "couldn't get idr"))
return id == -ENOSPC ? -EBUSY : id;
return i2c_register_adapter(adap);
id = idr_alloc(&i2c_adapter_idr, adapter,
__i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
mutex_unlock(&core_lock);
- if (id < 0)
+ if (WARN(id < 0, "couldn't get idr"))
return id;
adapter->nr = id;
found = idr_find(&i2c_adapter_idr, adap->nr);
mutex_unlock(&core_lock);
if (found != adap) {
- pr_debug("i2c-core: attempting to delete unregistered "
- "adapter [%s]\n", adap->name);
+ pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
return;
}
if (res)
return res;
- pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name);
+ pr_debug("driver [%s] registered\n", driver->driver.name);
INIT_LIST_HEAD(&driver->clients);
/* Walk the adapters that are already present */
i2c_for_each_dev(driver, __process_removed_driver);
driver_unregister(&driver->driver);
- pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name);
+ pr_debug("driver [%s] unregistered\n", driver->driver.name);
}
EXPORT_SYMBOL(i2c_del_driver);
put_device(&adap->dev);
if (IS_ERR(client)) {
- pr_err("%s: failed to create for '%s'\n",
- __func__, rd->dn->full_name);
+ dev_err(&adap->dev, "failed to create client for '%s'\n",
+ rd->dn->full_name);
return notifier_from_errno(PTR_ERR(client));
}
break;
if (IS_ENABLED(CONFIG_OF_DYNAMIC))
WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
+ if (IS_ENABLED(CONFIG_ACPI))
+ WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
return 0;
static void __exit i2c_exit(void)
{
+ if (IS_ENABLED(CONFIG_ACPI))
+ WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
if (IS_ENABLED(CONFIG_OF_DYNAMIC))
WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
i2c_del_driver(&dummy_driver);
cpec = i2c_smbus_msg_pec(cpec, msg);
if (rpec != cpec) {
- pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
+ pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
rpec, cpec);
return -EBADMSG;
}