powerpc/fsl-booke: Add T1023 RDB board support

T1023RDB is a Freescale Reference Design Board that hosts T1023 SoC.

T1023RDB board Overview
-----------------------
- T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
  prioritization and bandwidth allocation
- Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
  - one 1G RGMII port on-board(RTL8211F PHY)
  - one 1G SGMII port on-board(RTL8211F PHY)
  - one 2.5G SGMII port on-board(AQR105 PHY)
- PCIe: Two Mini-PCIe connectors on-board.
- SerDes: 4 lanes up to 10.3125GHz
- NOR:  128MB S29GL01GS110TFIV10 Spansion NOR Flash
- NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash
- eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash
- USB: one Type-A USB 2.0 port with internal PHY
- eSDHC: support SD/MMC card and eMMC flash on-board
- 256Kbit M24256 I2C EEPROM
- RTC: Real-time clock DS1339 on I2C bus
- UART: one serial port on-board with RJ45 connector
- Debugging: JTAG/COP for T1023 debugging

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/arch/powerpc/boot/dts/t1023rdb.dts b/arch/powerpc/boot/dts/t1023rdb.dts
new file mode 100644 (file)
index 0000000..06b090a
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1023rdb.dts
@@ -0,0 +1,151 @@
+/*
+ * T1023 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t102xsi-pre.dtsi"
+
+/ {
+       model = "fsl,T1023RDB";
+       compatible = "fsl,T1023RDB";
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       ifc: localbus@ffe124000 {
+               reg = <0xf 0xfe124000 0 0x2000>;
+               ranges = <0 0 0xf 0xe8000000 0x08000000
+                         1 0 0xf 0xff800000 0x00010000>;
+
+               nor@0,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       status = "disabled";
+                       compatible = "cfi-flash";
+                       reg = <0x0 0x0 0x8000000>;
+                       bank-width = <2>;
+                       device-width = <1>;
+               };
+
+               nand@1,0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,ifc-nand";
+                       reg = <0x2 0x0 0x10000>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+       };
+
+       dcsr: dcsr@f00000000 {
+               ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+       };
+
+       soc: soc@ffe000000 {
+               ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+               reg = <0xf 0xfe000000 0 0x00001000>;
+               spi@110000 {
+                       flash@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "spansion,s25fl512s";
+                               reg = <0>;
+                               spi-max-frequency = <10000000>; /* input clk */
+                       };
+               };
+
+               i2c@118000 {
+                       eeprom@50 {
+                               compatible = "st,m24256";
+                               reg = <0x50>;
+                       };
+
+                       rtc@68 {
+                               compatible = "dallas,ds1339";
+                               reg = <0x68>;
+                               interrupts = <0x5 0x1 0 0>;
+                       };
+               };
+
+               i2c@118100 {
+               };
+       };
+
+       pci0: pcie@ffe240000 {
+               reg = <0xf 0xfe240000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x10000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       pci1: pcie@ffe250000 {
+               reg = <0xf 0xfe250000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x10000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+
+       pci2: pcie@ffe260000 {
+               reg = <0xf 0xfe260000 0 0x10000>;
+               ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+                         0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+               pcie@0 {
+                       ranges = <0x02000000 0 0xe0000000
+                                 0x02000000 0 0xe0000000
+                                 0 0x10000000
+
+                                 0x01000000 0 0x00000000
+                                 0x01000000 0 0x00000000
+                                 0 0x00010000>;
+               };
+       };
+};
+
+/include/ "fsl/t1023si-post.dtsi"

diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index d7c1b4d..bd839dc 100644 (file)
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -150,6 +150,7 @@ static const char * const boards[] __initconst = {
        "fsl,B4860QDS",
        "fsl,B4420QDS",
        "fsl,B4220QDS",
+       "fsl,T1023RDB",
        "fsl,T1024QDS",
        "fsl,T1024RDB",
        "fsl,T1040QDS",