qlcnic: fix mailbox response handling
authorJitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Sat, 9 Feb 2013 09:29:55 +0000 (09:29 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 11 Feb 2013 07:04:13 +0000 (02:04 -0500)
o Do not read mailbox registers on timeout
o Add a helper function to handle mailbox response

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

index 51b4340..f7b39d1 100644 (file)
@@ -664,6 +664,21 @@ static void qlcnic_dump_mbx(struct qlcnic_adapter *adapter,
        pr_info("\n");
 }
 
+/* Mailbox response for mac rcode */
+static u32 qlcnic_83xx_mac_rcode(struct qlcnic_adapter *adapter)
+{
+       u32 fw_data;
+       u8 mac_cmd_rcode;
+
+       fw_data = readl(QLCNIC_MBX_FW(adapter->ahw, 2));
+       mac_cmd_rcode = (u8)fw_data;
+       if (mac_cmd_rcode == QLC_83XX_NO_NIC_RESOURCE ||
+           mac_cmd_rcode == QLC_83XX_MAC_PRESENT ||
+           mac_cmd_rcode == QLC_83XX_MAC_ABSENT)
+               return QLCNIC_RCODE_SUCCESS;
+       return 1;
+}
+
 static u32 qlcnic_83xx_mbx_poll(struct qlcnic_adapter *adapter)
 {
        u32 data;
@@ -686,7 +701,7 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter,
 {
        int i;
        u16 opcode;
-       u8 mbx_err_code, mac_cmd_rcode;
+       u8 mbx_err_code;
        u32 rsp, mbx_val, fw_data, rsp_num, mbx_cmd;
        struct qlcnic_hardware_context *ahw = adapter->ahw;
 
@@ -722,45 +737,44 @@ int qlcnic_83xx_mbx_op(struct qlcnic_adapter *adapter,
        QLCWRX(ahw, QLCNIC_HOST_MBX_CTRL, QLCNIC_SET_OWNER);
 poll:
        rsp = qlcnic_83xx_mbx_poll(adapter);
-       /* Get the FW response data */
-       fw_data = readl(QLCNIC_MBX_FW(ahw, 0));
-       mbx_err_code = QLCNIC_MBX_STATUS(fw_data);
-       rsp_num = QLCNIC_MBX_NUM_REGS(fw_data);
-       opcode = QLCNIC_MBX_RSP(fw_data);
-
        if (rsp != QLCNIC_RCODE_TIMEOUT) {
+               /* Get the FW response data */
+               fw_data = readl(QLCNIC_MBX_FW(ahw, 0));
                if (fw_data &  QLCNIC_MBX_ASYNC_EVENT) {
                        qlcnic_83xx_process_aen(adapter);
                        mbx_val = QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL);
                        if (mbx_val)
                                goto poll;
-               } else if ((mbx_err_code == QLCNIC_MBX_RSP_OK) ||
-                          (mbx_err_code == QLCNIC_MBX_PORT_RSP_OK)) {
-                       qlcnic_83xx_get_mbx_data(adapter, cmd);
+               }
+               mbx_err_code = QLCNIC_MBX_STATUS(fw_data);
+               rsp_num = QLCNIC_MBX_NUM_REGS(fw_data);
+               opcode = QLCNIC_MBX_RSP(fw_data);
+               qlcnic_83xx_get_mbx_data(adapter, cmd);
+
+               switch (mbx_err_code) {
+               case QLCNIC_MBX_RSP_OK:
+               case QLCNIC_MBX_PORT_RSP_OK:
                        rsp = QLCNIC_RCODE_SUCCESS;
-               } else {
-                       qlcnic_83xx_get_mbx_data(adapter, cmd);
+                       break;
+               default:
                        if (opcode == QLCNIC_CMD_CONFIG_MAC_VLAN) {
-                               fw_data = readl(QLCNIC_MBX_FW(ahw, 2));
-                               mac_cmd_rcode = (u8)fw_data;
-                               if (mac_cmd_rcode == QLC_83XX_NO_NIC_RESOURCE ||
-                                   mac_cmd_rcode == QLC_83XX_MAC_PRESENT ||
-                                   mac_cmd_rcode == QLC_83XX_MAC_ABSENT) {
-                                       rsp = QLCNIC_RCODE_SUCCESS;
+                               rsp = qlcnic_83xx_mac_rcode(adapter);
+                               if (!rsp)
                                        goto out;
-                               }
                        }
-                       dev_info(&adapter->pdev->dev,
-                                "MBX command 0x%x failed with err:0x%x\n",
-                                opcode, mbx_err_code);
+                       dev_err(&adapter->pdev->dev,
+                               "MBX command 0x%x failed with err:0x%x\n",
+                               opcode, mbx_err_code);
                        rsp = mbx_err_code;
                        qlcnic_dump_mbx(adapter, cmd);
+                       break;
                }
-       } else {
-               dev_info(&adapter->pdev->dev,
-                        "MBX command 0x%x timed out\n", opcode);
-               qlcnic_dump_mbx(adapter, cmd);
+               goto out;
        }
+
+       dev_err(&adapter->pdev->dev, "MBX command 0x%x timed out\n",
+               QLCNIC_MBX_RSP(mbx_cmd));
+       rsp = QLCNIC_RCODE_TIMEOUT;
 out:
        /* clear fw mbx control register */
        QLCWRX(ahw, QLCNIC_FW_MBX_CTRL, QLCNIC_CLR_OWNER);