ARM: OMAP4: clockdomain/CM code: Update supported transition modes
authorJon Hunter <jon-hunter@ti.com>
Wed, 4 Jul 2012 09:45:53 +0000 (03:45 -0600)
committerPaul Walmsley <paul@pwsan.com>
Wed, 4 Jul 2012 09:45:53 +0000 (03:45 -0600)
For OMAP3+ devices, the clock domains (CLKDMs) support one or more of the
following transition modes ...

NO_SLEEP (0x0) - A clock domain sleep transition is never initiated,
 irrespective of the hardware conditions.
SW_SLEEP (0x1) - A software-forced sleep transition. The transition is initiated
 when the associated hardware conditions are satisfied
SW_WKUP  (0x2) - A software-forced clock domain wake-up transition is initiated,
 irrespective of the hardware conditions.
HW_AUTO  (0x3) - Hardware-controlled automatic sleep and wake-up transition is
 initiated by the PRCM module when the associated hardware
 conditions are satisfied.

For OMAP4 devices, SW_SLEEP is equivalent to HW_AUTO and NO_SLEEP is equivalent
to SW_WKUP. The only difference between HW_AUTO and SW_SLEEP for OMAP4 devices
is that the PRM_IRQSTATUS_MPU.TRANSITION_ST interrupt status is set in case of
SW_SLEEP transition, and not set in case of HW_AUTO transition.

For OMAP4 devices, all CLKDMs support HW_AUTO and therefore we can place the
CLKDMs in the HW_AUTO state instead of the SW_SLEEP mode. Hence, we do not
need to use the SW_SLEEP mode. With regard to NO_SLEEP and SW_WKUP it is
preferred to use SW_WKUP mode if the CLKDM supports it and so use this mode
instead of NO_SLEEP where possible.

For a software perspective the above 4 modes are represented by the following
flags to indicate what modes are supported by each of the CLKDMs.

CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP
CLKDM_CAN_ENABLE_AUTO --> HW_AUTO
CLKDM_CAN_FORCE_SLEEP --> SW_SLEEP
CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP

By eliminating the SW_SLEEP mode the the mapping of the flags for OMAP4 devices
can becomes ...

CLKDM_CAN_DISABLE_AUTO --> NO_SLEEP
CLKDM_CAN_ENABLE_AUTO --> HW_AUTO
CLKDM_CAN_FORCE_SLEEP --> HW_AUTO
CLKDM_CAN_FORCE_WAKEUP --> SW_WKUP

Cc: Ming Lei <ming.lei@canonical.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
arch/arm/mach-omap2/clockdomain44xx.c
arch/arm/mach-omap2/cminst44xx.c

index 4f04dd1..762f2cc 100644 (file)
@@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 
 static int omap4_clkdm_sleep(struct clockdomain *clkdm)
 {
-       omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+       omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
                                        clkdm->cm_inst, clkdm->clkdm_offs);
        return 0;
 }
@@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
 
 static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-       omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
-                                       clkdm->cm_inst, clkdm->clkdm_offs);
+       if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+               omap4_clkdm_wakeup(clkdm);
+       else
+               omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+                                                clkdm->cm_inst,
+                                                clkdm->clkdm_offs);
 }
 
 static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
index 1a39945..1894015 100644 (file)
@@ -235,20 +235,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
 }
 
 /**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
-       _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
-/**
  * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
  * @part: PRCM partition ID that the clockdomain registers exist in
  * @inst: CM instance register offset (*_INST macro)