tegra: Add warmboot implementation
authorYen Lin <yelin@nvidia.com>
Tue, 10 Apr 2012 05:17:02 +0000 (05:17 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Tue, 15 May 2012 06:31:38 +0000 (08:31 +0200)
Add code to set up the warm boot area in the Tegra CPU ready for a
resume after suspend.

Signed-off-by: Yen Lin <yelin@nvidia.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
arch/arm/cpu/armv7/tegra2/Makefile
arch/arm/cpu/armv7/tegra2/warmboot.c [new file with mode: 0644]
arch/arm/cpu/armv7/tegra2/warmboot_avp.c [new file with mode: 0644]
arch/arm/cpu/armv7/tegra2/warmboot_avp.h [new file with mode: 0644]
arch/arm/include/asm/arch-tegra2/warmboot.h [new file with mode: 0644]

index dba684d..08c4137 100644 (file)
@@ -27,6 +27,7 @@
 # flags for any startup files it might use.
 CFLAGS_arch/arm/cpu/armv7/tegra2/ap20.o += -march=armv4t
 CFLAGS_arch/arm/cpu/armv7/tegra2/clock.o += -march=armv4t
+CFLAGS_arch/arm/cpu/armv7/tegra2/warmboot_avp.o += -march=armv4t
 
 include $(TOPDIR)/config.mk
 
@@ -37,6 +38,7 @@ COBJS-y       := ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
 COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
 COBJS-$(CONFIG_TEGRA_PMU) += pmu.o
 COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
+COBJS-$(CONFIG_TEGRA2_LP0) += crypto.o warmboot.o warmboot_avp.o
 
 COBJS  := $(COBJS-y)
 SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/tegra2/warmboot.c b/arch/arm/cpu/armv7/tegra2/warmboot.c
new file mode 100644 (file)
index 0000000..25d8968
--- /dev/null
@@ -0,0 +1,386 @@
+/*
+ * (C) Copyright 2010 - 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/fuse.h>
+#include <asm/arch/emc.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/warmboot.h>
+#include <asm/arch/sdram_param.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_TEGRA_CLOCK_SCALING
+#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA2_LP0"
+#endif
+
+/*
+ * This is the place in SRAM where the SDRAM parameters are stored. There
+ * are 4 blocks, one for each RAM code
+ */
+#define SDRAM_PARAMS_BASE      (AP20_BASE_PA_SRAM + 0x188)
+
+/* TODO: If we later add support for the Misc GP controller, refactor this */
+union xm2cfga_reg {
+       struct {
+               u32 reserved0:2;
+               u32 hsm_en:1;
+               u32 reserved1:2;
+               u32 preemp_en:1;
+               u32 vref_en:1;
+               u32 reserved2:5;
+               u32 cal_drvdn:5;
+               u32 reserved3:3;
+               u32 cal_drvup:5;
+               u32 reserved4:3;
+               u32 cal_drvdn_slwr:2;
+               u32 cal_drvup_slwf:2;
+       };
+       u32 word;
+};
+
+union xm2cfgd_reg {
+       struct {
+               u32 reserved0:2;
+               u32 hsm_en:1;
+               u32 schmt_en:1;
+               u32 lpmd:2;
+               u32 vref_en:1;
+               u32 reserved1:5;
+               u32 cal_drvdn:5;
+               u32 reserved2:3;
+               u32 cal_drvup:5;
+               u32 reserved3:3;
+               u32 cal_drvdn_slwr:2;
+               u32 cal_drvup_slwf:2;
+       };
+       u32 word;
+};
+
+/*
+ * TODO: This register is not documented in the TRM yet. We could move this
+ * into the EMC and give it a proper interface, but not while it is
+ * undocumented.
+ */
+union fbio_spare_reg {
+       struct {
+               u32 reserved:24;
+               u32 cfg_wb0:8;
+       };
+       u32 word;
+};
+
+/* We pack the resume information into these unions for later */
+union scratch2_reg {
+       struct {
+               u32 pllm_base_divm:5;
+               u32 pllm_base_divn:10;
+               u32 pllm_base_divp:3;
+               u32 pllm_misc_lfcon:4;
+               u32 pllm_misc_cpcon:4;
+               u32 gp_xm2cfga_padctrl_preemp:1;
+               u32 gp_xm2cfgd_padctrl_schmt:1;
+               u32 osc_ctrl_xobp:1;
+               u32 memory_type:3;
+       };
+       u32 word;
+};
+
+union scratch4_reg {
+       struct {
+               u32 emc_clock_divider:8;
+               u32 pllm_stable_time:8;
+               u32 pllx_stable_time:8;
+               u32 emc_fbio_spare_cfg_wb0:8;
+       };
+       u32 word;
+};
+
+union scratch24_reg {
+       struct {
+               u32 emc_auto_cal_wait:8;
+               u32 emc_pin_program_wait:8;
+               u32 warmboot_wait:8;
+               u32 reserved:8;
+       };
+       u32 word;
+};
+
+int warmboot_save_sdram_params(void)
+{
+       u32 ram_code;
+       struct sdram_params sdram;
+       struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+       struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
+       struct apb_misc_gp_ctlr *gp =
+                       (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE;
+       struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob);
+       union scratch2_reg scratch2;
+       union scratch4_reg scratch4;
+       union scratch24_reg scratch24;
+       union xm2cfga_reg xm2cfga;
+       union xm2cfgd_reg xm2cfgd;
+       union fbio_spare_reg fbio_spare;
+
+       /* get ram code that is used as index to array sdram_params in BCT */
+       ram_code = (readl(&pmt->pmt_strap_opt_a) >>
+                       STRAP_OPT_A_RAM_CODE_SHIFT) & 3;
+       memcpy(&sdram,
+              (char *)((struct sdram_params *)SDRAM_PARAMS_BASE + ram_code),
+              sizeof(sdram));
+
+       xm2cfga.word = readl(&gp->xm2cfga);
+       xm2cfgd.word = readl(&gp->xm2cfgd);
+
+       scratch2.word = 0;
+       scratch2.osc_ctrl_xobp = clock_get_osc_bypass();
+
+       /* Get the memory PLL settings */
+       {
+               u32 divm, divn, divp, cpcon, lfcon;
+
+               if (clock_ll_read_pll(CLOCK_ID_MEMORY, &divm, &divn, &divp,
+                                       &cpcon, &lfcon))
+                       return -1;
+               scratch2.pllm_base_divm = divm;
+               scratch2.pllm_base_divn = divn;
+               scratch2.pllm_base_divp = divp;
+               scratch2.pllm_misc_cpcon = cpcon;
+               scratch2.pllm_misc_lfcon = lfcon;
+       }
+
+       scratch2.gp_xm2cfga_padctrl_preemp = xm2cfga.preemp_en;
+       scratch2.gp_xm2cfgd_padctrl_schmt = xm2cfgd.schmt_en;
+       scratch2.memory_type = sdram.memory_type;
+       writel(scratch2.word, &pmc->pmc_scratch2);
+
+       /* collect data from various sources for pmc_scratch4 */
+       fbio_spare.word = readl(&emc->fbio_spare);
+       scratch4.word = 0;
+       scratch4.emc_fbio_spare_cfg_wb0 = fbio_spare.cfg_wb0;
+       scratch4.emc_clock_divider = sdram.emc_clock_divider;
+       scratch4.pllm_stable_time = -1;
+       scratch4.pllx_stable_time = -1;
+       writel(scratch4.word, &pmc->pmc_scratch4);
+
+       /* collect various data from sdram for pmc_scratch24 */
+       scratch24.word = 0;
+       scratch24.emc_pin_program_wait = sdram.emc_pin_program_wait;
+       scratch24.emc_auto_cal_wait = sdram.emc_auto_cal_wait;
+       scratch24.warmboot_wait = sdram.warm_boot_wait;
+       writel(scratch24.word, &pmc->pmc_scratch24);
+
+       return 0;
+}
+
+static u32 get_major_version(void)
+{
+       u32 major_id;
+       struct apb_misc_gp_ctlr *gp =
+               (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE;
+
+       major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >>
+                       HIDREV_MAJORPREV_SHIFT;
+       return major_id;
+}
+
+static int is_production_mode_fuse_set(struct fuse_regs *fuse)
+{
+       return readl(&fuse->production_mode);
+}
+
+static int is_odm_production_mode_fuse_set(struct fuse_regs *fuse)
+{
+       return readl(&fuse->security_mode);
+}
+
+static int is_failure_analysis_mode(struct fuse_regs *fuse)
+{
+       return readl(&fuse->fa);
+}
+
+static int ap20_is_odm_production_mode(void)
+{
+       struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE;
+
+       if (!is_failure_analysis_mode(fuse) &&
+           is_odm_production_mode_fuse_set(fuse))
+               return 1;
+       else
+               return 0;
+}
+
+static int ap20_is_production_mode(void)
+{
+       struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE;
+
+       if (get_major_version() == 0)
+               return 1;
+
+       if (!is_failure_analysis_mode(fuse) &&
+           is_production_mode_fuse_set(fuse) &&
+           !is_odm_production_mode_fuse_set(fuse))
+               return 1;
+       else
+               return 0;
+}
+
+static enum fuse_operating_mode fuse_get_operation_mode(void)
+{
+       u32 chip_id;
+       struct apb_misc_gp_ctlr *gp =
+               (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE;
+
+       chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >>
+                       HIDREV_CHIPID_SHIFT;
+       if (chip_id == CHIPID_TEGRA2) {
+               if (ap20_is_odm_production_mode()) {
+                       printf("!! odm_production_mode is not supported !!\n");
+                       return MODE_UNDEFINED;
+               } else
+                       if (ap20_is_production_mode())
+                               return MODE_PRODUCTION;
+                       else
+                               return MODE_UNDEFINED;
+       }
+       return MODE_UNDEFINED;
+}
+
+static void determine_crypto_options(int *is_encrypted, int *is_signed,
+                                    int *use_zero_key)
+{
+       switch (fuse_get_operation_mode()) {
+       case MODE_PRODUCTION:
+               *is_encrypted = 0;
+               *is_signed = 1;
+               *use_zero_key = 1;
+               break;
+       case MODE_UNDEFINED:
+       default:
+               *is_encrypted = 0;
+               *is_signed = 0;
+               *use_zero_key  = 0;
+               break;
+       }
+}
+
+static int sign_wb_code(u32 start, u32 length, int use_zero_key)
+{
+       int err;
+       u8 *source;             /* Pointer to source */
+       u8 *hash;
+
+       /* Calculate AES block parameters. */
+       source = (u8 *)(start + offsetof(struct wb_header, random_aes_block));
+       length -= offsetof(struct wb_header, random_aes_block);
+       hash = (u8 *)(start + offsetof(struct wb_header, hash));
+       err = sign_data_block(source, length, hash);
+
+       return err;
+}
+
+int warmboot_prepare_code(u32 seg_address, u32 seg_length)
+{
+       int err = 0;
+       u32 length;                     /* length of the signed/encrypt code */
+       struct wb_header *dst_header;   /* Pointer to dest WB header */
+       int is_encrypted;               /* Segment is encrypted */
+       int is_signed;                  /* Segment is signed */
+       int use_zero_key;               /* Use key of all zeros */
+
+       /* Determine crypto options. */
+       determine_crypto_options(&is_encrypted, &is_signed, &use_zero_key);
+
+       /* Get the actual code limits. */
+       length = roundup(((u32)wb_end - (u32)wb_start), 16);
+
+       /*
+        * The region specified by seg_address must be in SDRAM and must be
+        * nonzero in length.
+        */
+       if (seg_length == 0 || seg_address < NV_PA_SDRAM_BASE ||
+               seg_address + seg_length >= NV_PA_SDRAM_BASE + gd->ram_size) {
+               err = -EFAULT;
+               goto fail;
+       }
+
+       /* Things must be 16-byte aligned. */
+       if ((seg_length & 0xF) || (seg_address & 0xF)) {
+               err = -EINVAL;
+               goto fail;
+       }
+
+       /* Will the code fit? (destination includes wb_header + wb code) */
+       if (seg_length < (length + sizeof(struct wb_header))) {
+               err = -EINVAL;
+               goto fail;
+       }
+
+       dst_header = (struct wb_header *)seg_address;
+       memset((char *)dst_header, 0, sizeof(struct wb_header));
+
+       /* Populate the random_aes_block as requested. */
+       {
+               u32 *aes_block = (u32 *)&(dst_header->random_aes_block);
+               u32 *end = (u32 *)(((u32)aes_block) +
+                                  sizeof(dst_header->random_aes_block));
+
+               do {
+                       *aes_block++ = 0;
+               } while (aes_block < end);
+       }
+
+       /* Populate the header. */
+       dst_header->length_insecure = length + sizeof(struct wb_header);
+       dst_header->length_secure = length + sizeof(struct wb_header);
+       dst_header->destination = AP20_WB_RUN_ADDRESS;
+       dst_header->entry_point = AP20_WB_RUN_ADDRESS;
+       dst_header->code_length = length;
+
+       if (is_encrypted) {
+               printf("!!!! Encryption is not supported !!!!\n");
+               dst_header->length_insecure = 0;
+               err = -EACCES;
+               goto fail;
+       } else
+               /* copy the wb code directly following dst_header. */
+               memcpy((char *)(dst_header+1), (char *)wb_start, length);
+
+       if (is_signed)
+               err = sign_wb_code(seg_address, dst_header->length_insecure,
+                                  use_zero_key);
+
+fail:
+       if (err)
+               printf("Warning: warmboot code copy failed (error=%d)\n", err);
+
+       return err;
+}
diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.c b/arch/arm/cpu/armv7/tegra2/warmboot_avp.c
new file mode 100644 (file)
index 0000000..70bcd8e
--- /dev/null
@@ -0,0 +1,250 @@
+/*
+ * (C) Copyright 2010 - 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/warmboot.h>
+#include "warmboot_avp.h"
+
+#define DEBUG_RESET_CORESIGHT
+
+void wb_start(void)
+{
+       struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+       struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
+       struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+       struct clk_rst_ctlr *clkrst =
+                       (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+       union osc_ctrl_reg osc_ctrl;
+       union pllx_base_reg pllx_base;
+       union pllx_misc_reg pllx_misc;
+       union scratch3_reg scratch3;
+       u32 reg;
+
+       /* enable JTAG & TBE */
+       writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &pmt->pmt_cfg_ctl);
+
+       /* Are we running where we're supposed to be? */
+       asm volatile (
+               "adr    %0, wb_start;"  /* reg: wb_start address */
+               : "=r"(reg)             /* output */
+                                       /* no input, no clobber list */
+       );
+
+       if (reg != AP20_WB_RUN_ADDRESS)
+               goto do_reset;
+
+       /* Are we running with AVP? */
+       if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP)
+               goto do_reset;
+
+#ifdef DEBUG_RESET_CORESIGHT
+       /* Assert CoreSight reset */
+       reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
+       reg |= SWR_CSITE_RST;
+       writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
+#endif
+
+       /* TODO: Set the drive strength - maybe make this a board parameter? */
+       osc_ctrl.word = readl(&clkrst->crc_osc_ctrl);
+       osc_ctrl.xofs = 4;
+       osc_ctrl.xoe = 1;
+       writel(osc_ctrl.word, &clkrst->crc_osc_ctrl);
+
+       /* Power up the CPU complex if necessary */
+       if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) {
+               reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START;
+               writel(reg, &pmc->pmc_pwrgate_toggle);
+               while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU))
+                       ;
+       }
+
+       /* Remove the I/O clamps from the CPU power partition. */
+       reg = readl(&pmc->pmc_remove_clamping);
+       reg |= CPU_CLMP;
+       writel(reg, &pmc->pmc_remove_clamping);
+
+       reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP;
+       writel(reg, &flow->halt_cop_events);
+
+       /* Assert CPU complex reset */
+       reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
+       reg |= CPU_RST;
+       writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+
+       /* Hold both CPUs in reset */
+       reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 |
+             CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1;
+       writel(reg, &clkrst->crc_cpu_cmplx_set);
+
+       /* Halt CPU1 at the flow controller for uni-processor configurations */
+       writel(EVENT_MODE_STOP, &flow->halt_cpu1_events);
+
+       /*
+        * Set the CPU reset vector. SCRATCH41 contains the physical
+        * address of the CPU-side restoration code.
+        */
+       reg = readl(&pmc->pmc_scratch41);
+       writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+       /* Select CPU complex clock source */
+       writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+
+       /* Start the CPU0 clock and stop the CPU1 clock */
+       reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN |
+             CPU_CMPLX_CPU1_CLK_STP_STOP;
+       writel(reg, &clkrst->crc_clk_cpu_cmplx);
+
+       /* Enable the CPU complex clock */
+       reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
+       reg |= CLK_ENB_CPU;
+       writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
+
+       /* Make sure the resets were held for at least 2 microseconds */
+       reg = readl(TIMER_USEC_CNTR);
+       while (readl(TIMER_USEC_CNTR) <= (reg + 2))
+               ;
+
+#ifdef DEBUG_RESET_CORESIGHT
+       /*
+        * De-assert CoreSight reset.
+        * NOTE: We're leaving the CoreSight clock on the oscillator for
+        *      now. It will be restored to its original clock source
+        *      when the CPU-side restoration code runs.
+        */
+       reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
+       reg &= ~SWR_CSITE_RST;
+       writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
+#endif
+
+       /* Unlock the CPU CoreSight interfaces */
+       reg = 0xC5ACCE55;
+       writel(reg, CSITE_CPU_DBG0_LAR);
+       writel(reg, CSITE_CPU_DBG1_LAR);
+
+       /*
+        * Sample the microsecond timestamp again. This is the time we must
+        * use when returning from LP0 for PLL stabilization delays.
+        */
+       reg = readl(TIMER_USEC_CNTR);
+       writel(reg, &pmc->pmc_scratch1);
+
+       pllx_base.word = 0;
+       pllx_misc.word = 0;
+       scratch3.word = readl(&pmc->pmc_scratch3);
+
+       /* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */
+       reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1;
+
+       /*
+        * According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and
+        * USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz.
+        *
+        * reg is used to calculate the pllx freq, which is used to determine if
+        * to set dccon or not.
+        */
+       if (reg > 26)
+               reg = 19;
+
+       /* PLLX_BASE.PLLX_DIVM */
+       if (scratch3.pllx_base_divm == reg)
+               reg = 0;
+       else
+               reg = 1;
+
+       /* PLLX_BASE.PLLX_DIVN */
+       pllx_base.divn = scratch3.pllx_base_divn;
+       reg = scratch3.pllx_base_divn << reg;
+
+       /* PLLX_BASE.PLLX_DIVP */
+       pllx_base.divp = scratch3.pllx_base_divp;
+       reg = reg >> scratch3.pllx_base_divp;
+
+       pllx_base.bypass = 1;
+
+       /* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */
+       if (reg > 600)
+               pllx_misc.dccon = 1;
+
+       /* PLLX_MISC_LFCON */
+       pllx_misc.lfcon = scratch3.pllx_misc_lfcon;
+
+       /* PLLX_MISC_CPCON */
+       pllx_misc.cpcon = scratch3.pllx_misc_cpcon;
+
+       writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc);
+       writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+
+       pllx_base.enable = 1;
+       writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+       pllx_base.bypass = 0;
+       writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+
+       writel(0, flow->halt_cpu_events);
+
+       reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0;
+       writel(reg, &clkrst->crc_cpu_cmplx_clr);
+
+       reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE |
+             PLLM_OUT1_RATIO_VAL_8;
+       writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out);
+
+       reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 |
+             SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 |
+             SCLK_SYS_STATE_IDLE;
+       writel(reg, &clkrst->crc_sclk_brst_pol);
+
+       /* avp_resume: no return after the write */
+       reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
+       reg &= ~CPU_RST;
+       writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+
+       /* avp_halt: */
+avp_halt:
+       reg = EVENT_MODE_STOP | EVENT_JTAG;
+       writel(reg, flow->halt_cop_events);
+       goto avp_halt;
+
+do_reset:
+       /*
+        * Execution comes here if something goes wrong. The chip is reset and
+        * a cold boot is performed.
+        */
+       writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+       goto do_reset;
+}
+
+/*
+ * wb_end() is a dummy function, and must be directly following wb_start(),
+ * and is used to calculate the size of wb_start().
+ */
+void wb_end(void)
+{
+}
diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.h b/arch/arm/cpu/armv7/tegra2/warmboot_avp.h
new file mode 100644 (file)
index 0000000..4b71c07
--- /dev/null
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _WARMBOOT_AVP_H_
+#define _WARMBOOT_AVP_H_
+
+#define TEGRA_DEV_L                    0
+#define TEGRA_DEV_H                    1
+#define TEGRA_DEV_U                    2
+
+#define SIMPLE_PLLX                    (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE)
+#define SIMPLE_PLLE                    (CLOCK_ID_EPCI - CLOCK_ID_FIRST_SIMPLE)
+
+#define TIMER_USEC_CNTR                        (NV_PA_TMRUS_BASE + 0)
+#define TIMER_USEC_CFG                 (NV_PA_TMRUS_BASE + 4)
+
+#define USEC_CFG_DIVISOR_MASK          0xffff
+
+#define CONFIG_CTL_TBE                 (1 << 7)
+#define CONFIG_CTL_JTAG                        (1 << 6)
+
+#define CPU_RST                                (1 << 0)
+#define CLK_ENB_CPU                    (1 << 0)
+#define SWR_TRIG_SYS_RST               (1 << 2)
+#define SWR_CSITE_RST                  (1 << 9)
+
+#define PWRGATE_STATUS_CPU             (1 << 0)
+#define PWRGATE_TOGGLE_PARTID_CPU      (0 << 0)
+#define PWRGATE_TOGGLE_START           (1 << 8)
+
+#define CPU_CMPLX_CPU_BRIDGE_CLKDIV_4  (3 << 0)
+#define CPU_CMPLX_CPU0_CLK_STP_STOP    (1 << 8)
+#define CPU_CMPLX_CPU0_CLK_STP_RUN     (0 << 8)
+#define CPU_CMPLX_CPU1_CLK_STP_STOP    (1 << 9)
+#define CPU_CMPLX_CPU1_CLK_STP_RUN     (0 << 9)
+
+#define CPU_CMPLX_CPURESET0            (1 << 0)
+#define CPU_CMPLX_CPURESET1            (1 << 1)
+#define CPU_CMPLX_DERESET0             (1 << 4)
+#define CPU_CMPLX_DERESET1             (1 << 5)
+#define CPU_CMPLX_DBGRESET0            (1 << 12)
+#define CPU_CMPLX_DBGRESET1            (1 << 13)
+
+#define PLLM_OUT1_RSTN_RESET_DISABLE   (1 << 0)
+#define PLLM_OUT1_CLKEN_ENABLE         (1 << 1)
+#define PLLM_OUT1_RATIO_VAL_8          (8 << 8)
+
+#define SCLK_SYS_STATE_IDLE            (1 << 28)
+#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1   (7 << 12)
+#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1   (7 << 8)
+#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1   (7 << 4)
+#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1  (7 << 0)
+
+#define EVENT_ZERO_VAL_20              (20 << 0)
+#define EVENT_MSEC                     (1 << 24)
+#define EVENT_JTAG                     (1 << 28)
+#define EVENT_MODE_STOP                        (2 << 29)
+
+#define CCLK_PLLP_BURST_POLICY         0x20004444
+
+#endif
diff --git a/arch/arm/include/asm/arch-tegra2/warmboot.h b/arch/arm/include/asm/arch-tegra2/warmboot.h
new file mode 100644 (file)
index 0000000..99ac2e7
--- /dev/null
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _WARM_BOOT_H_
+#define _WARM_BOOT_H_
+
+#define STRAP_OPT_A_RAM_CODE_SHIFT     4
+#define STRAP_OPT_A_RAM_CODE_MASK      (0xf << STRAP_OPT_A_RAM_CODE_SHIFT)
+
+/* Defines the supported operating modes */
+enum fuse_operating_mode {
+       MODE_PRODUCTION = 3,
+       MODE_UNDEFINED,
+};
+
+/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */
+enum {
+       HASH_LENGTH = 4
+};
+
+/* Defines the storage for a hash value (128 bits) */
+struct hash {
+       u32 hash[HASH_LENGTH];
+};
+
+/*
+ * Defines the code header information for the boot rom.
+ *
+ * The code immediately follows the code header.
+ *
+ * Note that the code header needs to be 16 bytes aligned to preserve
+ * the alignment of relevant data for hash and decryption computations without
+ * requiring extra copies to temporary memory areas.
+ */
+struct wb_header {
+       u32 length_insecure;    /* length of the code header */
+       u32 reserved[3];
+       struct hash hash;       /* hash of header+code, starts next field*/
+       struct hash random_aes_block;   /* a data block to aid security. */
+       u32 length_secure;      /* length of the code header */
+       u32 destination;        /* destination address to put the wb code */
+       u32 entry_point;        /* execution address of the wb code */
+       u32 code_length;        /* length of the code */
+};
+
+/*
+ * The warm boot code needs direct access to these registers since it runs in
+ * SRAM and cannot call other U-Boot code.
+ */
+union osc_ctrl_reg {
+       struct {
+               u32 xoe:1;
+               u32 xobp:1;
+               u32 reserved0:2;
+               u32 xofs:6;
+               u32 reserved1:2;
+               u32 xods:5;
+               u32 reserved2:3;
+               u32 oscfi_spare:8;
+               u32 pll_ref_div:2;
+               u32 osc_freq:2;
+       };
+       u32 word;
+};
+
+union pllx_base_reg {
+       struct {
+               u32 divm:5;
+               u32 reserved0:3;
+               u32 divn:10;
+               u32 reserved1:2;
+               u32 divp:3;
+               u32 reserved2:4;
+               u32 lock:1;
+               u32 reserved3:1;
+               u32 ref_dis:1;
+               u32 enable:1;
+               u32 bypass:1;
+       };
+       u32 word;
+};
+
+union pllx_misc_reg {
+       struct {
+               u32 vcocon:4;
+               u32 lfcon:4;
+               u32 cpcon:4;
+               u32 lock_sel:6;
+               u32 reserved0:1;
+               u32 lock_enable:1;
+               u32 reserved1:1;
+               u32 dccon:1;
+               u32 pts:2;
+               u32 reserved2:6;
+               u32 out1_div_byp:1;
+               u32 out1_inv_clk:1;
+       };
+       u32 word;
+};
+
+/*
+ * TODO: This register is not documented in the TRM yet. We could move this
+ * into the EMC and give it a proper interface, but not while it is
+ * undocumented.
+ */
+union scratch3_reg {
+       struct {
+               u32 pllx_base_divm:5;
+               u32 pllx_base_divn:10;
+               u32 pllx_base_divp:3;
+               u32 pllx_misc_lfcon:4;
+               u32 pllx_misc_cpcon:4;
+       };
+       u32 word;
+};
+
+
+/**
+ * Save warmboot memory settings for a later resume
+ *
+ * @return 0 if ok, -1 on error
+ */
+int warmboot_save_sdram_params(void);
+
+int warmboot_prepare_code(u32 seg_address, u32 seg_length);
+int sign_data_block(u8 *source, u32 length, u8 *signature);
+void wb_start(void);   /* Start of WB assembly code */
+void wb_end(void);     /* End of WB assembly code */
+
+#endif