-/*
+/*
* ASCII values for a number of symbolic constants, printing functions,
* etc.
* Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422)
* Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002)
* by D. Gilbert and aeb (20020609)
- * Update to SPC-4 T10/1713-D Rev 20, 22 May 2009, D. Gilbert 20090624
+ * Updated to SPC-4 T10/1713-D Rev 36g, D. Gilbert 20130701
*/
#include <linux/blkdev.h>
/* Commands with service actions that change the command name */
-#define MAINTENANCE_IN 0xa3
-#define MAINTENANCE_OUT 0xa4
#define SERVICE_ACTION_IN_12 0xab
#define SERVICE_ACTION_OUT_12 0xa9
+#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
#define SERVICE_ACTION_IN_16 0x9e
#define SERVICE_ACTION_OUT_16 0x9f
+#define THIRD_PARTY_COPY_OUT 0x83
+#define THIRD_PARTY_COPY_IN 0x84
/* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL,
"Reassign Blocks",
/* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL,
-/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
+/* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry",
/* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)",
"Reserve(6)",
/* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)",
-/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
+/* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic",
/* 1e-1f */ "Prevent/Allow Medium Removal", NULL,
/* 20-22 */ NULL, NULL, NULL,
/* 23-28 */ "Read Format Capacities", "Set Window",
/* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)",
"Read updated block",
/* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal",
-/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
+/* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position",
/* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)",
- "Read Defect Data(10)",
-/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
- "Read Buffer",
+ "Read Defect Data(10)",
+/* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer",
+ "Read Buffer",
/* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)",
/* 40-41 */ "Change Definition", "Write Same(10)",
/* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP",
"Read density support", "Play audio(10)", "Get configuration",
- "Play audio msf", "Play audio track/index",
+ "Play audio msf", "Sanitize/Play audio track/index",
/* 49-4f */ "Play track relative(10)", "Get event status notification",
"Pause/resume", "Log Select", "Log Sense", "Stop play/scan",
NULL,
/* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB",
"Variable length",
-/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy",
- "Receive copy results",
+/* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)",
+ "Third party copy out", "Third party copy in",
/* 85-89 */ "ATA command pass through(16)", "Access control in",
- "Access control out", "Read(16)", "Memory Export Out(16)",
+ "Access control out", "Read(16)", "Compare and Write",
/* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes",
"Write and verify(16)", "Verify(16)",
/* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)",
"Lock/unlock cache(16)", "Write same(16)", NULL,
/* 95-99 */ NULL, NULL, NULL, NULL, NULL,
-/* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)",
- "Service action out(16)",
+/* 9a-9f */ NULL, NULL, NULL, "Service action bidirectional",
+ "Service action in(16)", "Service action out(16)",
/* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank",
"Security protocol in", "Maintenance in", "Maintenance out",
"Move medium/play audio(12)",
{0x6, "Set identifying information"},
{0xa, "Set target port groups"},
{0xb, "Change aliases"},
+ {0xc, "Remove I_T nexus"},
{0xe, "Set priority"},
{0xf, "Set timestamp"},
{0x10, "Management protocol out"},
};
#define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr)
+static const struct value_name_pair serv_bidi_arr[] = {
+ {-1, "dummy entry"},
+};
+#define SERV_BIDI_SZ ARRAY_SIZE(serv_bidi_arr)
+
static const struct value_name_pair serv_in16_arr[] = {
{0x10, "Read capacity(16)"},
{0x11, "Read long(16)"},
{0x12, "Get LBA status"},
+ {0x13, "Report referrals"},
};
#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
};
#define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr)
+static const struct value_name_pair pr_in_arr[] = {
+ {0x0, "Persistent reserve in, read keys"},
+ {0x1, "Persistent reserve in, read reservation"},
+ {0x2, "Persistent reserve in, report capabilities"},
+ {0x3, "Persistent reserve in, read full status"},
+};
+#define PR_IN_SZ ARRAY_SIZE(pr_in_arr)
+
+static const struct value_name_pair pr_out_arr[] = {
+ {0x0, "Persistent reserve out, register"},
+ {0x1, "Persistent reserve out, reserve"},
+ {0x2, "Persistent reserve out, release"},
+ {0x3, "Persistent reserve out, clear"},
+ {0x4, "Persistent reserve out, preempt"},
+ {0x5, "Persistent reserve out, preempt and abort"},
+ {0x6, "Persistent reserve out, register and ignore existing key"},
+ {0x7, "Persistent reserve out, register and move"},
+};
+#define PR_OUT_SZ ARRAY_SIZE(pr_out_arr)
+
+/* SPC-4 rev 34 renamed the Extended Copy opcode to Third Party Copy Out.
+ LID1 (List Identifier length: 1 byte) is the Extended Copy found in SPC-2
+ and SPC-3 */
+static const struct value_name_pair tpc_out_arr[] = {
+ {0x0, "Extended copy(LID1)"},
+ {0x1, "Extended copy(LID4)"},
+ {0x10, "Populate token"},
+ {0x11, "Write using token"},
+ {0x1c, "Copy operation abort"},
+};
+#define TPC_OUT_SZ ARRAY_SIZE(tpc_out_arr)
+
+static const struct value_name_pair tpc_in_arr[] = {
+ {0x0, "Receive copy status(LID1)"},
+ {0x1, "Receive copy data(LID1)"},
+ {0x3, "Receive copy operating parameters"},
+ {0x4, "Receive copy failure details(LID1)"},
+ {0x5, "Receive copy status(LID4)"},
+ {0x6, "Receive copy data(LID4)"},
+ {0x7, "Receive ROD token information"},
+ {0x8, "Report all ROD tokens"},
+};
+#define TPC_IN_SZ ARRAY_SIZE(tpc_in_arr)
+
+
static const struct value_name_pair variable_length_arr[] = {
{0x1, "Rebuild(32)"},
{0x2, "Regenerate(32)"},
static void print_opcode_name(unsigned char * cdbp, int cdb_len)
{
int sa, len, cdb0;
+ int fin_name = 0;
const char * name;
cdb0 = cdbp[0];
break;
}
sa = (cdbp[8] << 8) + cdbp[9];
- name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ, sa);
+ name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ,
+ sa);
if (name)
printk("%s", name);
else
case MAINTENANCE_IN:
sa = cdbp[1] & 0x1f;
name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
break;
case MAINTENANCE_OUT:
sa = cdbp[1] & 0x1f;
name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
+ break;
+ case PERSISTENT_RESERVE_IN:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(pr_in_arr, PR_IN_SZ, sa);
+ fin_name = 1;
+ break;
+ case PERSISTENT_RESERVE_OUT:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(pr_out_arr, PR_OUT_SZ, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_IN_12:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_OUT_12:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
+ break;
+ case SERVICE_ACTION_BIDIRECTIONAL:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(serv_bidi_arr, SERV_BIDI_SZ, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_IN_16:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
break;
case SERVICE_ACTION_OUT_16:
sa = cdbp[1] & 0x1f;
name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ fin_name = 1;
+ break;
+ case THIRD_PARTY_COPY_IN:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(tpc_in_arr, TPC_IN_SZ, sa);
+ fin_name = 1;
+ break;
+ case THIRD_PARTY_COPY_OUT:
+ sa = cdbp[1] & 0x1f;
+ name = get_sa_name(tpc_out_arr, TPC_OUT_SZ, sa);
+ fin_name = 1;
break;
default:
if (cdb0 < 0xc0) {
printk("cdb[0]=0x%x (vendor)", cdb0);
break;
}
+ if (fin_name) {
+ if (name)
+ printk("%s", name);
+ else
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ }
}
#else /* ifndef CONFIG_SCSI_CONSTANTS */
break;
case MAINTENANCE_IN:
case MAINTENANCE_OUT:
+ case PERSISTENT_RESERVE_IN:
+ case PERSISTENT_RESERVE_OUT:
case SERVICE_ACTION_IN_12:
case SERVICE_ACTION_OUT_12:
+ case SERVICE_ACTION_BIDIRECTIONAL:
case SERVICE_ACTION_IN_16:
case SERVICE_ACTION_OUT_16:
+ case THIRD_PARTY_COPY_IN:
+ case THIRD_PARTY_COPY_OUT:
sa = cdbp[1] & 0x1f;
printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
break;
break;
}
}
-#endif
+#endif
void __scsi_print_command(unsigned char *cdb)
{
print_opcode_name(cdb, 0);
len = scsi_command_size(cdb);
/* print out all bytes in cdb */
- for (k = 0; k < len; ++k)
+ for (k = 0; k < len; ++k)
printk(" %02x", cdb[k]);
printk("\n");
}
/*
* The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20130605]
*/
+
static const struct error_info additional[] =
{
{0x0000, "No additional sense information"},
{0x001C, "Verify operation in progress"},
{0x001D, "ATA pass through information available"},
{0x001E, "Conflicting SA creation request"},
+ {0x001F, "Logical unit transitioning to another power condition"},
+ {0x0020, "Extended copy information available"},
{0x0100, "No index/sector signal"},
{0x0412, "Logical unit not ready, offline"},
{0x0413, "Logical unit not ready, SA creation in progress"},
{0x0414, "Logical unit not ready, space allocation in progress"},
+ {0x0415, "Logical unit not ready, robotics disabled"},
+ {0x0416, "Logical unit not ready, configuration required"},
+ {0x0417, "Logical unit not ready, calibration required"},
+ {0x0418, "Logical unit not ready, a door is open"},
+ {0x0419, "Logical unit not ready, operating in sequential mode"},
+ {0x041A, "Logical unit not ready, start stop unit command in "
+ "progress"},
+ {0x041B, "Logical unit not ready, sanitize in progress"},
+ {0x041C, "Logical unit not ready, additional power use not yet "
+ "granted"},
+ {0x041D, "Logical unit not ready, configuration in progress"},
{0x0500, "Logical unit does not respond to selection"},
{0x0B06, "Warning - non-volatile cache now volatile"},
{0x0B07, "Warning - degraded power to non-volatile cache"},
{0x0B08, "Warning - power loss expected"},
+ {0x0B09, "Warning - device statistics notification active"},
{0x0C00, "Write error"},
{0x0C01, "Write error - recovered with auto reallocation"},
{0x0C0B, "Auxiliary memory write error"},
{0x0C0C, "Write error - unexpected unsolicited data"},
{0x0C0D, "Write error - not enough unsolicited data"},
+ {0x0C0E, "Multiple write errors"},
{0x0C0F, "Defects in error window"},
{0x0D00, "Error detected by third party temporary initiator"},
{0x1001, "Logical block guard check failed"},
{0x1002, "Logical block application tag check failed"},
{0x1003, "Logical block reference tag check failed"},
+ {0x1004, "Logical block protection error on recover buffered data"},
+ {0x1005, "Logical block protection method error"},
{0x1100, "Unrecovered read error"},
{0x1101, "Read retries exhausted"},
{0x1112, "Auxiliary memory read error"},
{0x1113, "Read error - failed retransmission request"},
{0x1114, "Read error - lba marked bad by application client"},
+ {0x1115, "Write after sanitize required"},
{0x1200, "Address mark not found for id field"},
{0x2009, "Access denied - invalid LU identifier"},
{0x200A, "Access denied - invalid proxy token"},
{0x200B, "Access denied - ACL LUN conflict"},
+ {0x200C, "Illegal command when not in append-only mode"},
{0x2100, "Logical block address out of range"},
{0x2101, "Invalid element address"},
{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
+ {0x2300, "Invalid token operation, cause not reportable"},
+ {0x2301, "Invalid token operation, unsupported token type"},
+ {0x2302, "Invalid token operation, remote token usage not supported"},
+ {0x2303, "Invalid token operation, remote rod token creation not "
+ "supported"},
+ {0x2304, "Invalid token operation, token unknown"},
+ {0x2305, "Invalid token operation, token corrupt"},
+ {0x2306, "Invalid token operation, token revoked"},
+ {0x2307, "Invalid token operation, token expired"},
+ {0x2308, "Invalid token operation, token cancelled"},
+ {0x2309, "Invalid token operation, token deleted"},
+ {0x230A, "Invalid token operation, invalid token length"},
+
{0x2400, "Invalid field in cdb"},
{0x2401, "CDB decryption error"},
{0x2402, "Obsolete"},
"event"},
{0x2A13, "Data encryption key instance counter has changed"},
{0x2A14, "SA creation capabilities data has changed"},
+ {0x2A15, "Medium removal prevention preempted"},
{0x2B00, "Copy cannot execute since host cannot disconnect"},
{0x2C09, "Previous reservation conflict status"},
{0x2C0A, "Partition or collection contains user objects"},
{0x2C0B, "Not reserved"},
+ {0x2C0C, "Orwrite generation does not match"},
{0x2D00, "Overwrite error on update in place"},
{0x2F00, "Commands cleared by another initiator"},
{0x2F01, "Commands cleared by power loss notification"},
{0x2F02, "Commands cleared by device server"},
+ {0x2F03, "Some commands cleared by queuing layer event"},
{0x3000, "Incompatible medium installed"},
{0x3001, "Cannot read medium - unknown format"},
{0x3010, "Medium not formatted"},
{0x3011, "Incompatible volume type"},
{0x3012, "Incompatible volume qualifier"},
+ {0x3013, "Cleaning volume expired"},
{0x3100, "Medium format corrupted"},
{0x3101, "Format command failed"},
{0x3102, "Zoned formatting failed due to spare linking"},
+ {0x3103, "Sanitize command failed"},
{0x3200, "No defect spare location available"},
{0x3201, "Defect list update failure"},
{0x3B19, "Element enabled"},
{0x3B1A, "Data transfer device removed"},
{0x3B1B, "Data transfer device inserted"},
+ {0x3B1C, "Too many logical objects on partition to support "
+ "operation"},
{0x3D00, "Invalid bits in identify message"},
{0x3F12, "iSCSI IP address added"},
{0x3F13, "iSCSI IP address removed"},
{0x3F14, "iSCSI IP address changed"},
+ {0x3F15, "Inspect referrals sense descriptors"},
/*
* {0x40NN, "Ram failure"},
* {0x40NN, "Diagnostic failure on component nn"},
{0x4300, "Message error"},
{0x4400, "Internal target failure"},
+ {0x4401, "Persistent reservation information lost"},
{0x4471, "ATA device failed set features"},
{0x4500, "Select or reselect failure"},
{0x4B04, "Nak received"},
{0x4B05, "Data offset error"},
{0x4B06, "Initiator response timeout"},
+ {0x4B07, "Connection lost"},
+ {0x4B08, "Data-in buffer overflow - data buffer size"},
+ {0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
+ {0x4B0A, "Data-in buffer error"},
+ {0x4B0B, "Data-out buffer overflow - data buffer size"},
+ {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
+ {0x4B0D, "Data-out buffer error"},
+ {0x4B0E, "PCIe fabric error"},
+ {0x4B0F, "PCIe completion timeout"},
+ {0x4B10, "PCIe completer abort"},
+ {0x4B11, "PCIe poisoned tlp received"},
+ {0x4B12, "PCIe eCRC check failed"},
+ {0x4B13, "PCIe unsupported request"},
+ {0x4B14, "PCIe acs violation"},
+ {0x4B15, "PCIe tlp prefix blocked"},
{0x4C00, "Logical unit failed self-configuration"},
/*
{0x5302, "Medium removal prevented"},
{0x5303, "Medium removal prevented by data transfer element"},
{0x5304, "Medium thread or unthread failure"},
+ {0x5305, "Volume identifier invalid"},
+ {0x5306, "Volume identifier missing"},
+ {0x5307, "Duplicate volume identifier"},
+ {0x5308, "Element status unknown"},
{0x5400, "Scsi to host system interface failure"},
{0x5508, "Maximum number of supplemental decryption keys exceeded"},
{0x5509, "Medium auxiliary memory not accessible"},
{0x550A, "Data currently unavailable"},
+ {0x550B, "Insufficient power for operation"},
+ {0x550C, "Insufficient resources to create rod"},
+ {0x550D, "Insufficient resources to create rod token"},
{0x5700, "Unable to recover table-of-contents"},
{0x670B, "ATA device feature not enabled"},
{0x6800, "Logical unit not configured"},
+ {0x6801, "Subsidiary logical unit not configured"},
{0x6900, "Data loss on logical unit"},
{0x6901, "Multiple logical unit failures"},
"Vendor Specific(9)",
"Copy Aborted", /* A: COPY or COMPARE was aborted */
"Aborted Command", /* B: The target aborted the command */
- "Equal", /* C: A SEARCH DATA command found data equal */
+ "Equal", /* C: A SEARCH DATA command found data equal,
+ reserved in SPC-4 rev 36 */
"Volume Overflow", /* D: Medium full with still data to be written */
"Miscompare", /* E: Source data and data on the medium
do not agree */
+ "Completed", /* F: command completed sense data reported,
+ may occur for successful command */
};
#endif
struct scsi_sense_hdr *sshdr)
{
int k, num, res;
-
+
res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
if (0 == res) {
/* this may be SCSI-1 sense data */
scsi_show_result(cmd->result);
}
EXPORT_SYMBOL(scsi_print_result);
-
-
projects / platform / kernel / linux-arm64.git / commitdiff