S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://gitorious.org/linux-gemini/mainline.git
-S: Maintained
+S: Odd Fixes
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
-M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
+S: Odd Fixes
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
F: arch/arm/mach-mx*/
F: arch/arm/plat-mxc/
+ARM/FREESCALE IMX51
+M: Amit Kucheria <amit.kucheria@canonical.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-mx5/
+
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s3c6410/
+ ARM/SHMOBILE ARM ARCHITECTURE
+ M: Paul Mundt <lethal@linux-sh.org>
+ M: Magnus Damm <magnus.damm@gmail.com>
+ L: linux-sh@vger.kernel.org
+ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+ W: http://oss.renesas.com
+ S: Supported
+ F: arch/arm/mach-shmobile/
+ F: drivers/sh/
+
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: drivers/scsi/sym53c8xx_2/
LTP (Linux Test Project)
-M: Subrata Modak <subrata@linux.vnet.ibm.com>
-M: Mike Frysinger <vapier@gentoo.org>
+M: Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
+M: Garrett Cooper <yanegomi@gmail.com>
+M: Mike Frysinger <vapier@gentoo.org>
+M: Subrata Modak <subrata@linux.vnet.ibm.com>
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
S: Odd Fixes
F: drivers/net/
F: include/linux/if_*
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Maintained
+MMP2 SUPPORT (aka ARMADA610)
+M: Haojian Zhuang <haojian.zhuang@marvell.com>
+M: Eric Miao <eric.y.miao@gmail.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+S: Maintained
+
PXA MMCI DRIVER
S: Orphan
bool "Freescale MXC/iMX-based"
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select ARCH_MTD_XIP
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select COMMON_CLKDEV
help
Support for Freescale MXC/iMX-based family of processors
Orion-2 (5281), Orion-1-90 (6183).
config ARCH_MMP
- bool "Marvell PXA168/910"
+ bool "Marvell PXA168/910/MMP2"
depends on MMU
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select TICK_ONESHOT
select PLAT_PXA
help
- Support for Marvell's PXA168/910 processor line.
+ Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
interface to the ARM9 modem processor which runs the baseband stack
and controls some vital subsystems (clock and power control, etc).
+ config ARCH_SHMOBILE
+ bool "Renesas SH-Mobile"
+ help
+ Support for Renesas's SH-Mobile ARM platforms
+
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
help
Samsung S3C64XX series based systems
+config ARCH_S5P6440
+ bool "Samsung S5P6440"
+ select CPU_V6
+ select GENERIC_GPIO
+ select HAVE_CLK
+ help
+ Samsung S5P6440 CPU based systems
+
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
select GENERIC_GPIO
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c6410/Kconfig"
endif
+source "arch/arm/mach-s5p6440/Kconfig"
+
+ source "arch/arm/mach-shmobile/Kconfig"
+
source "arch/arm/plat-stmp3xxx/Kconfig"
if ARCH_S5PC1XX
config HZ
int
default 128 if ARCH_L7200
- default 200 if ARCH_EBSA110 || ARCH_S3C2410
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default 100
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
+ machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_U300) := u300
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
+plat-$(CONFIG_PLAT_S5P) := s5p samsung s3c
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
int
depends on ARM && PLAT_S3C
default 2 if ARCH_S3C2400
- default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+ default 4 if ARCH_S5P6440 || ARCH_S5PC1XX || ARCH_S5PV210 || ARCH_S3C64XX || CPU_S3C2443
default 3
help
Select the number of available UART ports for the Samsung S3C
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+ tristate "Samsung S3C6400/S3C6410/S5P6440 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
default y
help
- Serial port support for the Samsung S3C6400 and S3C6410
+ Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
SoCs
config SERIAL_S5PC100
help
Serial port support for the Samsung S5PC100 SoCs
+config SERIAL_S5PV210
+ tristate "Samsung S5PV210 Serial port support"
+ depends on SERIAL_SAMSUNG && CPU_S5PV210
+ default y
+ help
+ Serial port support for Samsung's S5P Family of SoC's
+
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on HAVE_CLK && (SUPERH || H8300)
+ depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS