media: c8sectpfe: Clean up handling of *_buffer_aligned

There are a few cases where code is harder than needed to read.
Improve those by:
- dropping unnecessary castings (see note below)
- use PTR_ALING() to be more explicit on what's going on there
- use proper definitions instead of hard coded values

Note, dropping castings will allow to perform an additional check
that type is not changed from void * to something else, e.g. u64,
which may very well break the bitmap APIs.

Link: https://lore.kernel.org/linux-media/20220209182521.55632-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

diff --git a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
index 7bb1384..d60908e 100644 (file)
--- a/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c
@@ -107,7 +107,7 @@ static void channel_swdemux_tsklet(struct tasklet_struct *t)
                                size,
                                DMA_FROM_DEVICE);
 
-       buf = (u8 *) channel->back_buffer_aligned;
+       buf = channel->back_buffer_aligned;
 
        dev_dbg(fei->dev,
                "chan=%d channel=%p num_packets = %d, buf = %p, pos = 0x%x\n\trp=0x%lx, wp=0x%lx\n",
@@ -176,7 +176,7 @@ static int c8sectpfe_start_feed(struct dvb_demux_feed *dvbdmxfeed)
 
        channel = fei->channel_data[stdemux->tsin_index];
 
-       bitmap = (unsigned long *) channel->pid_buffer_aligned;
+       bitmap = channel->pid_buffer_aligned;
 
        /* 8192 is a special PID */
        if (dvbdmxfeed->pid == 8192) {
@@ -272,7 +272,7 @@ static int c8sectpfe_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
 
        channel = fei->channel_data[stdemux->tsin_index];
 
-       bitmap = (unsigned long *) channel->pid_buffer_aligned;
+       bitmap = channel->pid_buffer_aligned;
 
        if (dvbdmxfeed->pid == 8192) {
                tmp = readl(fei->io + C8SECTPFE_IB_PID_SET(channel->tsin_id));
@@ -333,8 +333,7 @@ static int c8sectpfe_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
                        __func__, __LINE__, stdemux, channel->tsin_id);
 
                /* turn off all PIDS in the bitmap */
-               memset((void *)channel->pid_buffer_aligned
-                       , 0x00, PID_TABLE_SIZE);
+               memset(channel->pid_buffer_aligned, 0, PID_TABLE_SIZE);
 
                /* manage cache so data is visible to HW */
                dma_sync_single_for_device(fei->dev,
@@ -458,23 +457,19 @@ static int configure_memdma_and_inputblock(struct c8sectpfei *fei,
 
        init_completion(&tsin->idle_completion);
 
-       tsin->back_buffer_start = kzalloc(FEI_BUFFER_SIZE +
-                                       FEI_ALIGNMENT, GFP_KERNEL);
-
+       tsin->back_buffer_start = kzalloc(FEI_BUFFER_SIZE + FEI_ALIGNMENT, GFP_KERNEL);
        if (!tsin->back_buffer_start) {
                ret = -ENOMEM;
                goto err_unmap;
        }
 
        /* Ensure backbuffer is 32byte aligned */
-       tsin->back_buffer_aligned = tsin->back_buffer_start
-               + FEI_ALIGNMENT;
+       tsin->back_buffer_aligned = tsin->back_buffer_start + FEI_ALIGNMENT;
 
-       tsin->back_buffer_aligned = (void *)
-               (((uintptr_t) tsin->back_buffer_aligned) & ~0x1F);
+       tsin->back_buffer_aligned = PTR_ALIGN(tsin->back_buffer_aligned, FEI_ALIGNMENT);
 
        tsin->back_buffer_busaddr = dma_map_single(fei->dev,
-                                       (void *)tsin->back_buffer_aligned,
+                                       tsin->back_buffer_aligned,
                                        FEI_BUFFER_SIZE,
                                        DMA_BIDIRECTIONAL);
 
@@ -489,8 +484,7 @@ static int configure_memdma_and_inputblock(struct c8sectpfei *fei,
         * per pid. By powers of deduction we conclude stih407 family
         * is configured (at SoC design stage) for bit per pid.
         */
-       tsin->pid_buffer_start = kzalloc(2048, GFP_KERNEL);
-
+       tsin->pid_buffer_start = kzalloc(PID_TABLE_SIZE + PID_TABLE_SIZE, GFP_KERNEL);
        if (!tsin->pid_buffer_start) {
                ret = -ENOMEM;
                goto err_unmap;
@@ -503,11 +497,9 @@ static int configure_memdma_and_inputblock(struct c8sectpfei *fei,
         * the register.
         */
 
-       tsin->pid_buffer_aligned = tsin->pid_buffer_start +
-               PID_TABLE_SIZE;
+       tsin->pid_buffer_aligned = tsin->pid_buffer_start + PID_TABLE_SIZE;
 
-       tsin->pid_buffer_aligned = (void *)
-               (((uintptr_t) tsin->pid_buffer_aligned) & ~0x3ff);
+       tsin->pid_buffer_aligned = PTR_ALIGN(tsin->pid_buffer_aligned, PID_TABLE_SIZE);
 
        tsin->pid_buffer_busaddr = dma_map_single(fei->dev,
                                                tsin->pid_buffer_aligned,