staging: et131x: Fix checkpatch whitespace warnings
authorMark Einon <mark.einon@gmail.com>
Sat, 3 Sep 2011 11:49:06 +0000 (12:49 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 6 Sep 2011 23:53:38 +0000 (16:53 -0700)
Some of my previous hacking attempts have not been following the rules.
All fixes either lines > 80 chars or whitespace corrections (spaces->tabs etc).

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/et131x/et1310_mac.c
drivers/staging/et131x/et1310_phy.c
drivers/staging/et131x/et1310_phy.h
drivers/staging/et131x/et1310_tx.c
drivers/staging/et131x/et131x_ethtool.c
drivers/staging/et131x/et131x_initpci.c
drivers/staging/et131x/et131x_isr.c
drivers/staging/et131x/et131x_netdev.c

index ab85cb3..36f2168 100644 (file)
@@ -191,7 +191,8 @@ void et1310_config_mac_regs2(struct et131x_adapter *adapter)
        cfg1 |= CFG1_RX_ENABLE | CFG1_TX_ENABLE | CFG1_TX_FLOW;
        /* Initialize loop back to off */
        cfg1 &= ~(CFG1_LOOPBACK | CFG1_RX_FLOW);
-       if (adapter->flowcontrol == FLOW_RXONLY || adapter->flowcontrol == FLOW_BOTH)
+       if (adapter->flowcontrol == FLOW_RXONLY ||
+                               adapter->flowcontrol == FLOW_BOTH)
                cfg1 |= CFG1_RX_FLOW;
        writel(cfg1, &mac->cfg1);
 
@@ -287,7 +288,7 @@ void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
        writel(sa_lo, &rxmac->sa_lo);
 
        sa_hi = (u32) (adapter->addr[0] << ET_WOL_HI_SA1_SHIFT) |
-                      adapter->addr[1];
+                      adapter->addr[1];
        writel(sa_hi, &rxmac->sa_hi);
 
        /* Disable all Packet Filtering */
index fedde6b..12345c7 100644 (file)
@@ -132,7 +132,7 @@ int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value)
 {
        struct phy_device *phydev = adapter->phydev;
 
-       if(!phydev)
+       if (!phydev)
                return -EIO;
 
        return et131x_phy_mii_read(adapter, phydev->addr, reg, value);
@@ -224,7 +224,7 @@ int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value)
        u32 mii_cmd;
        u32 mii_indicator;
 
-       if(!phydev)
+       if (!phydev)
                return -EIO;
 
        addr = phydev->addr;
@@ -465,10 +465,12 @@ void et131x_mii_check(struct et131x_adapter *adapter,
                                u16 register18;
 
                                et131x_mii_read(adapter, 0x12, &register18);
-                               et131x_mii_write(adapter, 0x12, register18 | 0x4);
+                               et131x_mii_write(adapter, 0x12,
+                                                register18 | 0x4);
                                et131x_mii_write(adapter, 0x10,
                                                 register18 | 0x8402);
-                               et131x_mii_write(adapter, 0x11, register18 | 511);
+                               et131x_mii_write(adapter, 0x11,
+                                                register18 | 511);
                                et131x_mii_write(adapter, 0x12, register18);
                        }
 
@@ -529,10 +531,12 @@ void et131x_mii_check(struct et131x_adapter *adapter,
                                u16 register18;
 
                                et131x_mii_read(adapter, 0x12, &register18);
-                               et131x_mii_write(adapter, 0x12, register18 | 0x4);
+                               et131x_mii_write(adapter, 0x12,
+                                                register18 | 0x4);
                                et131x_mii_write(adapter, 0x10,
                                                 register18 | 0x8402);
-                               et131x_mii_write(adapter, 0x11, register18 | 511);
+                               et131x_mii_write(adapter, 0x11,
+                                                register18 | 511);
                                et131x_mii_write(adapter, 0x12, register18);
                        }
 
index d8753f1..88dc8cd 100644 (file)
@@ -280,19 +280,18 @@ struct mi_regs {
 #define PHY_INDEX_REG              0x10
 #define PHY_DATA_REG               0x11
 
-#define PHY_MPHY_CONTROL_REG       0x12        /* #define TRU_VMI_MPHY_CONTROL_REGISTER           18 */
-
-#define PHY_LOOPBACK_CONTROL       0x13        /* #define TRU_VMI_LOOPBACK_CONTROL_1_REGISTER     19 */
-                                       /* #define TRU_VMI_LOOPBACK_CONTROL_2_REGISTER     20 */
-#define PHY_REGISTER_MGMT_CONTROL  0x15        /* #define TRU_VMI_MI_SEQ_CONTROL_REGISTER         21 */
-#define PHY_CONFIG                 0x16        /* #define TRU_VMI_CONFIGURATION_REGISTER          22 */
-#define PHY_PHY_CONTROL            0x17        /* #define TRU_VMI_PHY_CONTROL_REGISTER            23 */
-#define PHY_INTERRUPT_MASK         0x18        /* #define TRU_VMI_INTERRUPT_MASK_REGISTER         24 */
-#define PHY_INTERRUPT_STATUS       0x19        /* #define TRU_VMI_INTERRUPT_STATUS_REGISTER       25 */
-#define PHY_PHY_STATUS             0x1A        /* #define TRU_VMI_PHY_STATUS_REGISTER             26 */
-#define PHY_LED_1                  0x1B        /* #define TRU_VMI_LED_CONTROL_1_REGISTER          27 */
-#define PHY_LED_2                  0x1C        /* #define TRU_VMI_LED_CONTROL_2_REGISTER          28 */
-                                       /* #define TRU_VMI_LINK_CONTROL_REGISTER           29 */
-                                       /* #define TRU_VMI_TIMING_CONTROL_REGISTER */
+#define PHY_MPHY_CONTROL_REG       0x12
+#define PHY_LOOPBACK_CONTROL       0x13        /* TRU_VMI_LOOPBACK_CONTROL_1_REG 19 */
+                                       /* TRU_VMI_LOOPBACK_CONTROL_2_REG 20 */
+#define PHY_REGISTER_MGMT_CONTROL  0x15        /* TRU_VMI_MI_SEQ_CONTROL_REG     21 */
+#define PHY_CONFIG                 0x16        /* TRU_VMI_CONFIGURATION_REG      22 */
+#define PHY_PHY_CONTROL            0x17        /* TRU_VMI_PHY_CONTROL_REG        23 */
+#define PHY_INTERRUPT_MASK         0x18        /* TRU_VMI_INTERRUPT_MASK_REG     24 */
+#define PHY_INTERRUPT_STATUS       0x19        /* TRU_VMI_INTERRUPT_STATUS_REG   25 */
+#define PHY_PHY_STATUS             0x1A        /* TRU_VMI_PHY_STATUS_REG         26 */
+#define PHY_LED_1                  0x1B        /* TRU_VMI_LED_CONTROL_1_REG      27 */
+#define PHY_LED_2                  0x1C        /* TRU_VMI_LED_CONTROL_2_REG      28 */
+                                       /* TRU_VMI_LINK_CONTROL_REG       29 */
+                                       /* TRU_VMI_TIMING_CONTROL_REG        */
 
 #endif /* _ET1310_PHY_H_ */
index f821104..aa07138 100644 (file)
@@ -435,7 +435,7 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
        add_10bit(&adapter->tx_ring.send_idx, thiscopy);
 
        if (INDEX10(adapter->tx_ring.send_idx) == 0 ||
-                   INDEX10(adapter->tx_ring.send_idx) == NUM_DESC_PER_RING_TX) {
+                 INDEX10(adapter->tx_ring.send_idx) == NUM_DESC_PER_RING_TX) {
                adapter->tx_ring.send_idx &= ~ET_DMA10_MASK;
                adapter->tx_ring.send_idx ^= ET_DMA10_WRAP;
        }
@@ -641,7 +641,8 @@ static inline void free_send_packet(struct et131x_adapter *adapter,
                 * they point to
                 */
                do {
-                       desc = (struct tx_desc *)(adapter->tx_ring.tx_desc_ring +
+                       desc = (struct tx_desc *)
+                                   (adapter->tx_ring.tx_desc_ring +
                                                INDEX10(tcb->index_start));
 
                        pci_unmap_single(adapter->pdev,
index d980ad6..b92633f 100644 (file)
@@ -58,10 +58,10 @@ static void et131x_get_drvinfo(struct net_device *netdev,
 }
 
 static struct ethtool_ops et131x_ethtool_ops = {
-        .get_settings = et131x_get_settings,
-        .set_settings = et131x_set_settings,
-        .get_drvinfo = et131x_get_drvinfo,
-        .get_link = ethtool_op_get_link,
+       .get_settings = et131x_get_settings,
+       .set_settings = et131x_set_settings,
+       .get_drvinfo = et131x_get_drvinfo,
+       .get_link = ethtool_op_get_link,
 };
 
 void et131x_set_ethtool_ops(struct net_device *netdev)
index 2ef2a70..3cfcc2d 100644 (file)
@@ -487,30 +487,30 @@ int et131x_mii_probe(struct net_device *netdev)
        phydev = phy_connect(netdev, dev_name(&phydev->dev),
                        &et131x_adjust_link, 0, PHY_INTERFACE_MODE_MII);
 
-       if(IS_ERR(phydev)) {
+       if (IS_ERR(phydev)) {
                dev_err(&adapter->pdev->dev, "Could not attach to PHY\n");
                return PTR_ERR(phydev);
        }
 
        phydev->supported &= (SUPPORTED_10baseT_Half
-                                | SUPPORTED_10baseT_Full
-                                | SUPPORTED_100baseT_Half
-                                | SUPPORTED_100baseT_Full
-                                | SUPPORTED_Autoneg
-                                | SUPPORTED_MII
-                                | SUPPORTED_TP);
+                               | SUPPORTED_10baseT_Full
+                               | SUPPORTED_100baseT_Half
+                               | SUPPORTED_100baseT_Full
+                               | SUPPORTED_Autoneg
+                               | SUPPORTED_MII
+                               | SUPPORTED_TP);
 
        if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
                phydev->supported |= SUPPORTED_1000baseT_Full;
 
-        phydev->advertising = phydev->supported;
-        adapter->phydev = phydev;
+       phydev->advertising = phydev->supported;
+       adapter->phydev = phydev;
 
-        dev_info(&adapter->pdev->dev, "attached PHY driver [%s] "
-                "(mii_bus:phy_addr=%s)\n",
-                phydev->drv->name, dev_name(&phydev->dev));
+       dev_info(&adapter->pdev->dev, "attached PHY driver [%s] "
+                "(mii_bus:phy_addr=%s)\n",
+                phydev->drv->name, dev_name(&phydev->dev));
 
-        return 0;
+       return 0;
 }
 
 /**
@@ -707,22 +707,22 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
        adapter->mii_bus->write = et131x_mdio_write;
        adapter->mii_bus->reset = et131x_mdio_reset;
        adapter->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-        if (!adapter->mii_bus->irq) {
-                dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
+       if (!adapter->mii_bus->irq) {
+               dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
                goto err_mdio_free;
-        }
+       }
 
-        for (ii = 0; ii < PHY_MAX_ADDR; ii++)
-                adapter->mii_bus->irq[ii] = PHY_POLL;
+       for (ii = 0; ii < PHY_MAX_ADDR; ii++)
+               adapter->mii_bus->irq[ii] = PHY_POLL;
 
-        if (mdiobus_register(adapter->mii_bus)) {
-                dev_err(&pdev->dev, "failed to register MII bus\n");
+       if (mdiobus_register(adapter->mii_bus)) {
+               dev_err(&pdev->dev, "failed to register MII bus\n");
                mdiobus_free(adapter->mii_bus);
                goto err_mdio_free_irq;
-        }
+       }
 
        if (et131x_mii_probe(netdev)) {
-                dev_err(&pdev->dev, "failed to probe MII bus\n");
+               dev_err(&pdev->dev, "failed to probe MII bus\n");
                goto err_mdio_unregister;
        }
 
index 4d75690..94565c1 100644 (file)
@@ -119,7 +119,8 @@ void et131x_enable_interrupts(struct et131x_adapter *adapter)
        u32 mask;
 
        /* Enable all global interrupts */
-       if (adapter->flowcontrol == FLOW_TXONLY || adapter->flowcontrol == FLOW_BOTH)
+       if (adapter->flowcontrol == FLOW_TXONLY ||
+                           adapter->flowcontrol == FLOW_BOTH)
                mask = INT_MASK_ENABLE;
        else
                mask = INT_MASK_ENABLE_NO_FLOW;
@@ -276,7 +277,8 @@ void et131x_isr_handler(struct work_struct *work)
                }
 
                /* Handle Free Buffer Ring 0 and 1 Low interrupt */
-               if (status & (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) {
+               if (status &
+                   (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) {
                        /*
                         * This indicates the number of unused buffers in
                         * RXDMA free buffer ring 0 is <= the limit you
index d12e05e..5fb4056 100644 (file)
@@ -408,7 +408,7 @@ void et131x_tx_timeout(struct net_device *netdev)
        unsigned long flags;
 
        /* If the device is closed, ignore the timeout */
-       if (~(adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE));
+       if (~(adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE))
                return;
 
        /* Any nonrecoverable hardware error?
@@ -453,7 +453,10 @@ void et131x_tx_timeout(struct net_device *netdev)
                        /* Disable device interrupts */
                        et131x_disable_interrupts(adapter);
 
-                       /* Enable the Tx and Rx DMA engines (if not already enabled) */
+                       /*
+                        * Enable the Tx and Rx DMA engines
+                        * (if not already enabled)
+                        */
                        et131x_rx_dma_enable(adapter);
                        et131x_tx_dma_enable(adapter);