CONFIG_GPIO_74X164=y
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
-CONFIG_GPIO_MCP23S08=y
+CONFIG_PINCTRL_MCP23S08=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_MAX6639=y
CONFIG_WATCHDOG=y
CONFIG_SPI_ADI_V3=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_MCP23S08=y
+CONFIG_PINCTRL_MCP23S08=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_BFIN_WDT=y
};
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
#include <linux/spi/mcp23s08.h>
static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
.chip[0].is_present = true,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
{
.modalias = "mcp23s08",
.platform_data = &bfin_mcp23s08_sys_gpio_info,
};
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
#include <linux/spi/mcp23s08.h>
static const struct mcp23s08_platform_data bfin_mcp23s08_soft_switch0 = {
.base = 120,
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
-#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
+#if IS_ENABLED(CONFIG_PINCTRL_MCP23S08)
{
I2C_BOARD_INFO("mcp23017", 0x21),
.platform_data = (void *)&bfin_mcp23s08_soft_switch0
endmenu
-menu "SPI or I2C GPIO expanders"
- depends on (SPI_MASTER && !I2C) || I2C
-
-config GPIO_MCP23S08
- tristate "Microchip MCP23xxx I/O expander"
- depends on OF_GPIO
- select GPIOLIB_IRQCHIP
- select REGMAP_I2C if I2C
- select REGMAP if SPI_MASTER
- help
- SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
- I/O expanders.
- This provides a GPIO interface supporting inputs and outputs.
- The I2C versions of the chips can be used as interrupt-controller.
-
-endmenu
-
menu "USB GPIO expanders"
depends on USB
obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
-obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o
depends on SOC_FALCON
depends on PINCTRL_LANTIQ
+config PINCTRL_MCP23S08
+ tristate "Microchip MCP23xxx I/O expander"
+ depends on OF_GPIO
+ depends on SPI_MASTER || I2C
+ select GPIOLIB_IRQCHIP
+ select REGMAP_I2C if I2C
+ select REGMAP_SPI if SPI_MASTER
+ help
+ SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+ I/O expanders.
+ This provides a GPIO interface supporting inputs and outputs.
+ The I2C versions of the chips can be used as interrupt-controller.
+
config PINCTRL_MESON
bool
depends on OF
obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_MAX77620) += pinctrl-max77620.o
+obj-$(CONFIG_PINCTRL_MCP23S08) += pinctrl-mcp23s08.o
obj-$(CONFIG_PINCTRL_MESON) += meson/
obj-$(CONFIG_PINCTRL_OXNAS) += pinctrl-oxnas.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o