board: freescale: p1_p2_rdb_pc: Use named macros for i2c bus num and address

Replace hardcoded boot i2c bus num and address by existing macros when
generating env for CONFIG_EXTRA_ENV_SETTINGS.

Same macros are used in U-Boot board code when reading information from
boot i2c data.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index c3df638..08e3f8d 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -535,28 +535,28 @@
 
 #ifdef __SW_BOOT_NOR
 #define __NOR_RST_CMD  \
-norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+norboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NOR 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
 #endif
 #ifdef __SW_BOOT_SPI
 #define __SPI_RST_CMD  \
-spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+spiboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SPI 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
 #endif
 #ifdef __SW_BOOT_SD
 #define __SD_RST_CMD   \
-sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+sdboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SD 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
 #endif
 #ifdef __SW_BOOT_NAND
 #define __NAND_RST_CMD \
-nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+nandboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NAND 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
 #endif
 #ifdef __SW_BOOT_PCIE
 #define __PCIE_RST_CMD \
-pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
-i2c mw 18 3 __SW_BOOT_MASK 1; reset
+pciboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_PCIE 1; \
+i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
 #endif
 
 #define        CONFIG_EXTRA_ENV_SETTINGS       \
@@ -583,9 +583,9 @@ i2c mw 18 3 __SW_BOOT_MASK 1; reset
 "nandbootaddr=100000\0"        \
 "nandfdtaddr=80000\0"          \
 "ramdisk_size=120000\0"        \
-"map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
-"map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
 __VSCFW_ADDR   \
+"map_lowernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 02 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 fd 1\0" \
+"map_uppernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 00 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 fd 1\0" \
 __stringify(__NOR_RST_CMD)"\0" \
 __stringify(__SPI_RST_CMD)"\0" \
 __stringify(__SD_RST_CMD)"\0" \