efi: Support a 64-bit frame buffer address
authorSimon Glass <sjg@chromium.org>
Fri, 10 Mar 2023 20:47:13 +0000 (12:47 -0800)
committerHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
Mon, 13 Mar 2023 12:53:01 +0000 (13:53 +0100)
The current vesa structure only provides a 32-bit value for the frame
buffer. Many modern machines use an address outside the range.

It is still useful to have this common struct, but add a separate
frame-buffer address as well.

Add a comment for vesa_setup_video_priv() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
arch/x86/lib/fsp/fsp_graphics.c
drivers/pci/pci_rom.c
drivers/video/coreboot.c
drivers/video/efi.c
include/vesa.h

index b07c666..2bcc49f 100644 (file)
@@ -106,7 +106,7 @@ static int fsp_video_probe(struct udevice *dev)
        vesa->phys_base_ptr = dm_pci_read_bar32(dev, 2);
        gd->fb_base = vesa->phys_base_ptr;
 
-       ret = vesa_setup_video_priv(vesa, uc_priv, plat);
+       ret = vesa_setup_video_priv(vesa, vesa->phys_base_ptr, uc_priv, plat);
        if (ret)
                goto err;
 
index 47b6e6e..f0dfe63 100644 (file)
@@ -325,7 +325,7 @@ err:
        return ret;
 }
 
-int vesa_setup_video_priv(struct vesa_mode_info *vesa,
+int vesa_setup_video_priv(struct vesa_mode_info *vesa, u64 fb,
                          struct video_priv *uc_priv,
                          struct video_uc_plat *plat)
 {
@@ -348,9 +348,9 @@ int vesa_setup_video_priv(struct vesa_mode_info *vesa,
 
        /* Use double buffering if enabled */
        if (IS_ENABLED(CONFIG_VIDEO_COPY) && plat->base)
-               plat->copy_base = vesa->phys_base_ptr;
+               plat->copy_base = fb;
        else
-               plat->base = vesa->phys_base_ptr;
+               plat->base = fb;
        log_debug("base = %lx, copy_base = %lx\n", plat->base, plat->copy_base);
        plat->size = vesa->bytes_per_scanline * vesa->y_resolution;
 
@@ -377,7 +377,9 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void))
                return ret;
        }
 
-       ret = vesa_setup_video_priv(&mode_info.vesa, uc_priv, plat);
+       ret = vesa_setup_video_priv(&mode_info.vesa,
+                                   mode_info.vesa.phys_base_ptr, uc_priv,
+                                   plat);
        if (ret) {
                if (ret == -ENFILE) {
                        /*
index d2d87c7..c586475 100644 (file)
@@ -57,7 +57,7 @@ static int coreboot_video_probe(struct udevice *dev)
                goto err;
        }
 
-       ret = vesa_setup_video_priv(vesa, uc_priv, plat);
+       ret = vesa_setup_video_priv(vesa, vesa->phys_base_ptr, uc_priv, plat);
        if (ret) {
                ret = log_msg_ret("setup", ret);
                goto err;
index 0479f20..169637c 100644 (file)
@@ -5,6 +5,8 @@
  * EFI framebuffer driver based on GOP
  */
 
+#define LOG_CATEGORY LOGC_EFI
+
 #include <common.h>
 #include <dm.h>
 #include <efi_api.h>
@@ -56,11 +58,12 @@ static void efi_find_pixel_bits(u32 mask, u8 *pos, u8 *size)
  * Gets info from the graphics-output protocol
  *
  * @vesa: Place to put the mode information
+ * @fbp: Returns the address of the frame buffer
  * @infop: Returns a pointer to the mode info
  * Returns: 0 if OK, -ENOSYS if boot services are not available, -ENOTSUPP if
  * the protocol is not supported by EFI
  */
-static int get_mode_info(struct vesa_mode_info *vesa,
+static int get_mode_info(struct vesa_mode_info *vesa, u64 *fbp,
                         struct efi_gop_mode_info **infop)
 {
        efi_guid_t efi_gop_guid = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID;
@@ -74,9 +77,13 @@ static int get_mode_info(struct vesa_mode_info *vesa,
        ret = boot->locate_protocol(&efi_gop_guid, NULL, (void **)&gop);
        if (ret)
                return log_msg_ret("prot", -ENOTSUPP);
-
        mode = gop->mode;
+       log_debug("maxmode %u, mode %u, info %p, size %lx, fb %lx, fb_size %lx\n",
+                 mode->max_mode, mode->mode, mode->info, mode->info_size,
+                 (ulong)mode->fb_base, (ulong)mode->fb_size);
+
        vesa->phys_base_ptr = mode->fb_base;
+       *fbp = mode->fb_base;
        vesa->x_resolution = mode->info->width;
        vesa->y_resolution = mode->info->height;
        *infop = mode->info;
@@ -91,10 +98,11 @@ static int get_mode_info(struct vesa_mode_info *vesa,
  * it into a vesa structure. It also returns the mode information.
  *
  * @vesa: Place to put the mode information
+ * @fbp: Returns the address of the frame buffer
  * @infop: Returns a pointer to the mode info
  * Returns: 0 if OK, -ve on error
  */
-static int get_mode_from_entry(struct vesa_mode_info *vesa,
+static int get_mode_from_entry(struct vesa_mode_info *vesa, u64 *fbp,
                               struct efi_gop_mode_info **infop)
 {
        struct efi_gop_mode *mode;
@@ -107,6 +115,7 @@ static int get_mode_from_entry(struct vesa_mode_info *vesa,
                return ret;
        }
        vesa->phys_base_ptr = mode->fb_base;
+       *fbp = mode->fb_base;
        vesa->x_resolution = mode->info->width;
        vesa->y_resolution = mode->info->height;
        *infop = mode->info;
@@ -114,16 +123,17 @@ static int get_mode_from_entry(struct vesa_mode_info *vesa,
        return 0;
 }
 
-static int save_vesa_mode(struct vesa_mode_info *vesa)
+static int save_vesa_mode(struct vesa_mode_info *vesa, u64 *fbp)
 {
        const struct efi_framebuffer *fbinfo;
        struct efi_gop_mode_info *info;
        int ret;
 
+       printf("start\n");
        if (IS_ENABLED(CONFIG_EFI_APP))
-               ret = get_mode_info(vesa, &info);
+               ret = get_mode_info(vesa, fbp, &info);
        else
-               ret = get_mode_from_entry(vesa, &info);
+               ret = get_mode_from_entry(vesa, fbp, &info);
        if (ret) {
                printf("EFI graphics output protocol not found (err=%dE)\n",
                       ret);
@@ -163,8 +173,7 @@ static int save_vesa_mode(struct vesa_mode_info *vesa)
                vesa->bytes_per_scanline = (info->pixels_per_scanline *
                                            vesa->bits_per_pixel) / 8;
        } else {
-               debug("efi set unknown framebuffer format: %d\n",
-                     info->pixel_format);
+               log_err("Unknown framebuffer format: %d\n", info->pixel_format);
                return -EINVAL;
        }
 
@@ -176,19 +185,20 @@ static int efi_video_probe(struct udevice *dev)
        struct video_uc_plat *plat = dev_get_uclass_plat(dev);
        struct video_priv *uc_priv = dev_get_uclass_priv(dev);
        struct vesa_mode_info *vesa = &mode_info.vesa;
+       u64 fb;
        int ret;
 
        /* Initialize vesa_mode_info structure */
-       ret = save_vesa_mode(vesa);
+       ret = save_vesa_mode(vesa, &fb);
        if (ret)
                goto err;
 
-       ret = vesa_setup_video_priv(vesa, uc_priv, plat);
+       ret = vesa_setup_video_priv(vesa, fb, uc_priv, plat);
        if (ret)
                goto err;
 
-       printf("Video: %dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
-              vesa->bits_per_pixel);
+       printf("Video: %dx%dx%d @ %lx\n", uc_priv->xsize, uc_priv->ysize,
+              vesa->bits_per_pixel, (ulong)fb);
 
        return 0;
 
index a42c179..9285bfa 100644 (file)
@@ -108,7 +108,21 @@ extern struct vesa_state mode_info;
 
 struct video_priv;
 struct video_uc_plat;
-int vesa_setup_video_priv(struct vesa_mode_info *vesa,
+
+/**
+ * vesa_setup_video_priv() - Set up a video device using VESA information
+ *
+ * The vesa struct is used by various x86 drivers, so this is a common function
+ * to use it to set up the video.
+ *
+ * @vesa: Vesa information to use (vesa->phys_base_ptr is ignored)
+ * @fb: Frame buffer address (since vesa->phys_base_ptr is only 32 bits)
+ * @uc_priv: Video device's uclass-private information
+ * @plat: Video devices's uclass-private platform data
+ * Returns: 0 if OK, -ENXIO if the x resolution is 0, -EEPROTONOSUPPORT if the
+ * pixel format is not supported
+ */
+int vesa_setup_video_priv(struct vesa_mode_info *vesa, u64 fb,
                          struct video_priv *uc_priv,
                          struct video_uc_plat *plat);
 int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void));