riscv: Add SPL_ZERO_MEM_BEFORE_USE implementation

Add the actual support code for SPL_ZERO_MEM_BEFORE_USE and remove
existing Starfive JH7110's L2 LIM clean code, since existing code has
following issues:
 1. Each hart (in the middle of a function call) overwriting its own
    stack and other harts' stacks.
    (data-race and data-corruption)
 2. Lottery winner hart can be doing "board_init_f_init_reserve",
    while other harts are in the middle of zeroing L2 LIM.
    (data-race)

Signed-off-by: Bo Gan <ganboing@gmail.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

diff --git a/arch/riscv/cpu/jh7110/spl.c b/arch/riscv/cpu/jh7110/spl.c
index 72adcef..4047b10 100644 (file)
--- a/arch/riscv/cpu/jh7110/spl.c
+++ b/arch/riscv/cpu/jh7110/spl.c
@@ -13,7 +13,6 @@
 #include <init.h>
 
 #define CSR_U74_FEATURE_DISABLE        0x7c1
-#define L2_LIM_MEM_END 0x81FFFFFUL
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -59,9 +58,6 @@ int spl_soc_init(void)
 
 void harts_early_init(void)
 {
-       ulong *ptr;
-       u8 *tmp;
-       ulong len, remain;
        /*
         * Feature Disable CSR
         *
@@ -70,25 +66,4 @@ void harts_early_init(void)
         */
        if (CONFIG_IS_ENABLED(RISCV_MMODE))
                csr_write(CSR_U74_FEATURE_DISABLE, 0);
-
-       /* clear L2 LIM  memory
-        * set __bss_end to 0x81FFFFF region to zero
-        * The L2 Cache Controller supports ECC. ECC is applied to SRAM.
-        * If it is not cleared, the ECC part is invalid, and an ECC error
-        * will be reported when reading data.
-        */
-       ptr = (ulong *)&__bss_end;
-       len = L2_LIM_MEM_END - (ulong)&__bss_end;
-       remain = len % sizeof(ulong);
-       len /= sizeof(ulong);
-
-       while (len--)
-               *ptr++ = 0;
-
-       /* clear the remain bytes */
-       if (remain) {
-               tmp = (u8 *)ptr;
-               while (remain--)
-                       *tmp++ = 0;
-       }
 }

diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index 59d58a5..30cf674 100644 (file)
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -111,6 +111,18 @@ call_board_init_f:
  * It's essential before any function call, otherwise, we get data-race.
  */
 
+/* clear stack if necessary */
+#if CONFIG_IS_ENABLED(ZERO_MEM_BEFORE_USE)
+clear_stack:
+       li      t1, 1
+       slli    t1, t1, CONFIG_STACK_SIZE_SHIFT
+       sub     t1, sp, t1
+clear_stack_loop:
+       SREG    zero, 0(t1)             /* t1 is always 16 byte aligned */
+       addi    t1, t1, REGBYTES
+       blt     t1, sp, clear_stack_loop
+#endif
+
 call_board_init_f_0:
        /* find top of reserve space */
 #if CONFIG_IS_ENABLED(SMP)

diff --git a/common/init/board_init.c b/common/init/board_init.c
index 96ffb79..ab8c508 100644 (file)
--- a/common/init/board_init.c
+++ b/common/init/board_init.c
@@ -162,6 +162,9 @@ void board_init_f_init_reserve(ulong base)
 #if CONFIG_VAL(SYS_MALLOC_F_LEN)
        /* go down one 'early malloc arena' */
        gd->malloc_base = base;
+#if CONFIG_IS_ENABLED(ZERO_MEM_BEFORE_USE)
+       memset((void *)base, '\0', CONFIG_VAL(SYS_MALLOC_F_LEN));
+#endif
 #endif
 
        if (CONFIG_IS_ENABLED(SYS_REPORT_STACK_F_USAGE))