static inline int match_bss_no_security(struct lbs_802_11_security *secinfo,
struct bss_descriptor *match_bss)
{
- if (!secinfo->wep_enabled && !secinfo->WPAenabled
- && !secinfo->WPA2enabled
- && match_bss->wpa_ie[0] != WLAN_EID_GENERIC
- && match_bss->rsn_ie[0] != WLAN_EID_RSN
- && !(match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+ if (!secinfo->wep_enabled &&
+ !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+ match_bss->wpa_ie[0] != WLAN_EID_GENERIC &&
+ match_bss->rsn_ie[0] != WLAN_EID_RSN &&
+ !(match_bss->capability & WLAN_CAPABILITY_PRIVACY))
return 1;
else
return 0;
static inline int match_bss_static_wep(struct lbs_802_11_security *secinfo,
struct bss_descriptor *match_bss)
{
- if (secinfo->wep_enabled && !secinfo->WPAenabled
- && !secinfo->WPA2enabled
- && (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+ if (secinfo->wep_enabled &&
+ !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+ (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
return 1;
else
return 0;
static inline int match_bss_wpa(struct lbs_802_11_security *secinfo,
struct bss_descriptor *match_bss)
{
- if (!secinfo->wep_enabled && secinfo->WPAenabled
- && (match_bss->wpa_ie[0] == WLAN_EID_GENERIC)
+ if (!secinfo->wep_enabled && secinfo->WPAenabled &&
+ (match_bss->wpa_ie[0] == WLAN_EID_GENERIC)
/* privacy bit may NOT be set in some APs like LinkSys WRT54G
&& (match_bss->capability & WLAN_CAPABILITY_PRIVACY) */
)
static inline int match_bss_dynamic_wep(struct lbs_802_11_security *secinfo,
struct bss_descriptor *match_bss)
{
- if (!secinfo->wep_enabled && !secinfo->WPAenabled
- && !secinfo->WPA2enabled
- && (match_bss->wpa_ie[0] != WLAN_EID_GENERIC)
- && (match_bss->rsn_ie[0] != WLAN_EID_RSN)
- && (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
+ if (!secinfo->wep_enabled &&
+ !secinfo->WPAenabled && !secinfo->WPA2enabled &&
+ (match_bss->wpa_ie[0] != WLAN_EID_GENERIC) &&
+ (match_bss->rsn_ie[0] != WLAN_EID_RSN) &&
+ (match_bss->capability & WLAN_CAPABILITY_PRIVACY))
return 1;
else
return 0;
/* If we're given and 'any' BSSID, try associating based on SSID */
if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
- if (compare_ether_addr(bssid_any, assoc_req->bssid)
- && compare_ether_addr(bssid_off, assoc_req->bssid)) {
+ if (compare_ether_addr(bssid_any, assoc_req->bssid) &&
+ compare_ether_addr(bssid_off, assoc_req->bssid)) {
ret = assoc_helper_bssid(priv, assoc_req);
done = 1;
}
goto restore_mesh;
}
- if ( assoc_req->secinfo.wep_enabled
- && (assoc_req->wep_keys[0].len
- || assoc_req->wep_keys[1].len
- || assoc_req->wep_keys[2].len
- || assoc_req->wep_keys[3].len)) {
+ if (assoc_req->secinfo.wep_enabled &&
+ (assoc_req->wep_keys[0].len || assoc_req->wep_keys[1].len ||
+ assoc_req->wep_keys[2].len || assoc_req->wep_keys[3].len)) {
/* Make sure WEP keys are re-sent to firmware */
set_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags);
}
assoc_req->secinfo.auth_mode);
/* If 'any' SSID was specified, find an SSID to associate with */
- if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)
- && !assoc_req->ssid_len)
+ if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags) &&
+ !assoc_req->ssid_len)
find_any_ssid = 1;
/* But don't use 'any' SSID if there's a valid locked BSSID to use */
if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
- if (compare_ether_addr(assoc_req->bssid, bssid_any)
- && compare_ether_addr(assoc_req->bssid, bssid_off))
+ if (compare_ether_addr(assoc_req->bssid, bssid_any) &&
+ compare_ether_addr(assoc_req->bssid, bssid_off))
find_any_ssid = 0;
}
goto out;
}
- if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags)
- || test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
+ if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags) ||
+ test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) {
ret = assoc_helper_wpa_keys(priv, assoc_req);
if (ret)
goto out;
}
- if ( test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags)
- || test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
+ if (test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags) ||
+ test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) {
ret = assoc_helper_wep_keys(priv, assoc_req);
if (ret)
goto out;
/* SSID/BSSID should be the _last_ config option set, because they
* trigger the association attempt.
*/
- if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)
- || test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
+ if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags) ||
+ test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
int success = 1;
ret = assoc_helper_associate(priv, assoc_req);