xhci: Add quirk to reset host back to default state at shutdown

commit 34cd2db408d591bc15771cbcc90939ade0a99a21 upstream.

Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.

This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.

A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ecf1 ("xhci: turn off port power in shutdown")
but it caused regression.

Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 3f4fab3..62312e8 100644 (file)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -259,6 +259,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
                xhci->quirks |= XHCI_MISSING_CAS;
 
        if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+           pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI)
+               xhci->quirks |= XHCI_RESET_TO_DEFAULT;
+
+       if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
            (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
             pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
             pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8c77106..3636fa4 100644 (file)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -795,9 +795,15 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
        spin_lock_irq(&xhci->lock);
        xhci_halt(xhci);
-       /* Workaround for spurious wakeups at shutdown with HSW */
-       if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+
+       /*
+        * Workaround for spurious wakeps at shutdown with HSW, and for boot
+        * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+        */
+       if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+           xhci->quirks & XHCI_RESET_TO_DEFAULT)
                xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
        spin_unlock_irq(&xhci->lock);
 
        xhci_cleanup_msix(xhci);

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3b39501..d3c0766 100644 (file)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1904,6 +1904,7 @@ struct xhci_hcd {
 #define XHCI_BROKEN_D3COLD     BIT_ULL(41)
 #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
 #define XHCI_SUSPEND_RESUME_CLKS       BIT_ULL(43)
+#define XHCI_RESET_TO_DEFAULT  BIT_ULL(44)
 
        unsigned int            num_active_eps;
        unsigned int            limit_active_eps;