tg3 / broadcom: Add PHY_BRCM_CLEAR_RGMII_MODE flag

Broadcom 50610M parts changed the default definitions of the RGMII mode
shadow register.  The 5785 needs the RGMII mode selection bits [4:3]
cleared.

The default value of the remaining bits in this register are zero.
Rather than unnecessarily burn an extra bit in the dev_flags member in
an attempt to enumerate all possible combinations, this patch take a
more course grained approach and labels the option as "clear all bits".

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index ace0ccc..5d2a2e9 100644 (file)
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -105,6 +105,7 @@
 #define BCM5482_SHD_LEDS1_LED3(src)    ((src & 0xf) << 4)
                                        /* LED1 / ~LINKSPD[1] selector */
 #define BCM5482_SHD_LEDS1_LED1(src)    ((src & 0xf) << 0)
+#define BCM54XX_SHD_RGMII_MODE 0x0b    /* 01011: RGMII Mode Selector */
 #define BCM5482_SHD_SSD                0x14    /* 10100: Secondary SerDes control */
 #define BCM5482_SHD_SSD_LEDM   0x0008  /* SSD LED Mode enable */
 #define BCM5482_SHD_SSD_EN     0x0001  /* SSD enable */
@@ -330,6 +331,11 @@ static int bcm54xx_config_init(struct phy_device *phydev)
        if (err < 0)
                return err;
 
+       if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+            BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+           (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
+               bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+
        bcm54xx_phydsp_config(phydev);
 
        return 0;

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0aecd07..e7128f6 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1100,6 +1100,7 @@ static int tg3_mdio_init(struct tg3 *tp)
                break;
        case TG3_PHY_ID_BCM50610:
        case TG3_PHY_ID_BCM50610M:
+               phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE;
                if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
                        phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
                if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index daa1480..6e7ffce 100644 (file)
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -8,4 +8,5 @@
 #define PHY_BRCM_STD_IBND_DISABLE      0x00000800
 #define PHY_BRCM_EXT_IBND_RX_ENABLE    0x00001000
 #define PHY_BRCM_EXT_IBND_TX_ENABLE    0x00002000
+#define PHY_BRCM_CLEAR_RGMII_MODE      0x00004000
 #define PHY_BCM_FLAGS_VALID            0x80000000