ARM: add an extra temp register to the low level debugging addruart macro

Some platforms (like OMAP not to name it) are doing rather complicated
hacks just to determine the base UART address to use.  Let's give their
addruart macro some slack by providing an extra work register which will
allow for much needed cleanups.

This is basically a no-op as this commit is only adding the extra argument
to the macro but no one is using it yet.

Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>

diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index bcd66e0..b7685f1 100644 (file)
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
                @@ debug using ARM EmbeddedICE DCC channel
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                .endm
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
@@ -106,7 +106,7 @@
 
 #ifdef CONFIG_MMU
                .macro  addruart_current, rx, tmp1, tmp2
-               addruart        \tmp1, \tmp2
+               addruart        \tmp1, \tmp2, \rx
                mrc             p15, 0, \rx, c1, c0
                tst             \rx, #1
                moveq           \rx, \tmp1

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 136abb6..7408fd5 100644 (file)
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -234,7 +234,7 @@ __create_page_tables:
         * This allows debug messages to be output
         * via a serial console before paging_init.
         */
-       addruart r7, r3
+       addruart r7, r3, r0
 
        mov     r3, r3, lsr #20
        mov     r3, r3, lsl #2

diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index bc1e0b2..0ed8648 100644 (file)
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =(AT91_BASE_SYS + AT91_DBGU)       @ System peripherals (phys address)
        ldr     \rv, =(AT91_VA_BASE_SYS + AT91_DBGU)    @ System peripherals (virt address)
        .endm

diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 507c687..b802e8a 100644 (file)
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
                mov     \rp, #0x0000    @ UART1
 #else

diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index 56d8286..d04c150 100644 (file)
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
  */
 
-               .macro  addruart,rp,rv
+               .macro  addruart,rp,rv,tmp
                mov     \rp, #0x00009000
                orr     \rv, \rp, #0xf0000000   @ virtual base
                orr     \rp, \rp, #0x10000000

diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f8b7ea4..3cf4c1b 100644 (file)
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -32,7 +32,7 @@ davinci_uart_phys:    .word   0
 davinci_uart_virt:     .word   0
                .popsection
 
-               .macro addruart, rp, rv
+               .macro addruart, rp, rv, tmp
 
                /* Use davinci_uart_phys/virt if already configured */
 10:            mrc     p15, 0, \rp, c1, c0

diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index da8bf2b..5929cbc 100644 (file)
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =DOVE_SB_REGS_PHYS_BASE
        ldr     \rv, =DOVE_SB_REGS_VIRT_BASE
        orr     \rp, \rp, #0x00012000

diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 7ef5690..bb02c05 100644 (file)
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 **/
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0xf0000000
                orr     \rp, \rp, #0x00000be0
                mov     \rp, \rv

diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index b25bc90..af54e43 100644 (file)
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/ep93xx-regs.h>
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                ldr     \rp, =EP93XX_APB_PHYS_BASE      @ Physical base
                ldr     \rv, =EP93XX_APB_VIRT_BASE      @ virtual base
                orr     \rp, \rp, #0x000c0000

diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S
index a442ef8..6cacf16 100644 (file)
--- a/arch/arm/mach-exynos4/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
         * aligned and add in the offset when we load the value here.
         */
 
-       .macro addruart, rp, rv
+       .macro addruart, rp, rv, tmp
                ldr     \rp, = S3C_PA_UART
                ldr     \rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0

diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 1be2eeb..e5acde2 100644 (file)
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
        /* For NetWinder debugging */
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x000003f8
                orr     \rv, \rp, #0xff000000   @ virtual
                orr     \rp, \rp, #0x7c000000   @ physical
@@ -31,7 +31,7 @@
                .equ    dc21285_high, ARMCSR_BASE & 0xff000000
                .equ    dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                .if     dc21285_low
                mov     \rp, #dc21285_low
                .else

diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index f40e006..8376707 100644 (file)
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/hardware.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =GEMINI_UART_BASE                  @ physical
        ldr     \rv, =IO_ADDRESS(GEMINI_UART_BASE)      @ virtual
        .endm

diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index c2093e8..8a46157 100644 (file)
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
                .equ    io_virt, IO_VIRT
                .equ    io_phys, IO_PHYS
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00020000        @ UART1
                add     \rv, \rp, #io_virt      @ virtual address
                add     \rp, \rp, #io_phys      @ physical base address

diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index a1f598f..411b116 100644 (file)
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x16000000        @ physical base address
                mov     \rv, #0xf0000000        @ virtual base
                add     \rv, \rv, #0x16000000 >> 4

diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index e664466..d869a6f 100644 (file)
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        mov     \rp, #0x00002300
        orr     \rp, \rp, #0x00000040
        orr     \rv, \rp, #0xfe000000   @ virtual

diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index ff9e76c..363bdf9 100644 (file)
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0xfe000000        @ physical as well as virtual
                orr     \rp, \rp, #0x00800000   @ location of the UART
                mov     \rv, \rp

diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index 40c500d..361be1f 100644 (file)
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00ff0000
                orr     \rp, \rp, #0x0000f700
                orr     \rv, #0xfe000000        @ virtual

diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 0ef533b..bdd3ccd 100644 (file)
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00030000
 #ifdef __ARMEB__
                orr     \rp, \rp, #0x00000003

diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index f7c6eef..5ff524c 100644 (file)
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
  */
 #include <mach/ixp23xx.h>
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                ldr     \rp, =IXP23XX_PERIPHERAL_PHYS   @ physical
                ldr     \rv, =IXP23XX_PERIPHERAL_VIRT   @ virtual
 #ifdef __ARMEB__

diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index b974a49..8c9f8d5 100644 (file)
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart, rp, rv
+                .macro  addruart, rp, rv, tmp
 #ifdef __ARMEB__
                 mov     \rp, #3         @ Uart regs are at off set of 3 if
                                        @ byte writes used - Big Endian.

diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index db06ae4..f785d40 100644 (file)
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =KIRKWOOD_REGS_PHYS_BASE
        ldr     \rv, =KIRKWOOD_REGS_VIRT_BASE
        orr     \rp, \rp, #0x00012000

diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index bf516ad..a79e489 100644 (file)
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
                ldr     \rp, =KS8695_UART_PA            @ physical base address
                ldr     \rv, =KS8695_UART_VA            @ virtual base address
        .endm

diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b0a2db7..0b4e760 100644 (file)
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
                .equ    io_virt, IO_BASE
                .equ    io_phys, IO_START
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00044000        @ UART1
 @              mov     \rp, #0x00045000        @ UART2
                add     \rv, \rp, #io_virt      @ virtual address

diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 629e744..351bd6c 100644 (file)
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
  * Debug output is hardcoded to standard UART 5
 */
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldreq   \rp, =0x40090000
        ldrne   \rv, =0xF4090000
        .endm

diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 7e2ebd3..b6f14d2 100644 (file)
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/addr-map.h>
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                ldr     \rp, =APB_PHYS_BASE             @ physical
                ldr     \rv, =APB_VIRT_BASE             @ virtual
                orr     \rp, \rp, #0x00017000

diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 646b99e..2dc73cc 100644 (file)
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
 #include <mach/msm_iomap.h>
 
 #if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =MSM_DEBUG_UART_PHYS
        ldr     \rv, =MSM_DEBUG_UART_BASE
        .endm
@@ -37,7 +37,7 @@
        beq     1001b
        .endm
 #else
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        mov     \rv, #0xff000000
        orr     \rv, \rv, #0x00f00000
        .endm

diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index 0489142..a7df02b 100644 (file)
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/mv78xx0.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =MV78XX0_REGS_PHYS_BASE
        ldr     \rv, =MV78XX0_REGS_VIRT_BASE
        orr     \rp, \rp, #0x00012000

diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 79650a1..714570d 100644 (file)
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -30,7 +30,7 @@
 
 #define UART_VADDR     MXS_IO_ADDRESS(UART_PADDR)
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                ldr     \rp, =UART_PADDR        @ physical
                ldr     \rv, =UART_VADDR        @ virtual
                .endm

diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 56a9152..247781e 100644 (file)
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00000a00
                orr     \rv, \rp, #io_p2v(0x00100000)   @ virtual
                orr     \rp, \rp, #0x00100000           @ physical

diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e7151b4..7354179 100644 (file)
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  *
 */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00100000
                add     \rp, \rp, #0x000fb000
                add     \rv, \rp, #0xf0000000   @ virtual base

diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 6285604..f944ae8 100644 (file)
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -31,7 +31,7 @@ omap_uart_virt:       .word   0x0
                 * the desired UART phys and virt addresses temporarily into
                 * the omap_uart_phys and omap_uart_virt above.
                 */
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
 
                /* Use omap_uart_phys/virt if already configured */
 9:             mrc     p15, 0, \rp, c1, c0

diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 48adfe9..fbd23ec 100644 (file)
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -34,7 +34,7 @@ omap_uart_lsr:        .word   0
                 * the desired UART phys and virt addresses temporarily into
                 * the omap_uart_phys and omap_uart_virt above.
                 */
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
 
                /* Use omap_uart_phys/virt if already configured */
 10:            mrc     p15, 0, \rp, c1, c0

diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 5e3bf5b..f340ed8 100644 (file)
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 
 #include <mach/orion5x.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =ORION5X_REGS_PHYS_BASE
        ldr     \rv, =ORION5X_REGS_VIRT_BASE
        orr     \rp, \rp, #0x00012000

diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 931afeb..469d60d 100644 (file)
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00090000
                add     \rv, \rp, #0xf4000000   @ virtual
                add     \rp, \rp, #0x40000000   @ physical

diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S
index bf75106..cd97492 100644 (file)
--- a/arch/arm/mach-prima2/include/mach/debug-macro.S
+++ b/arch/arm/mach-prima2/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
 #include <mach/hardware.h>
 #include <mach/uart.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =SIRFSOC_UART1_PA_BASE             @ physical
        ldr     \rv, =SIRFSOC_UART1_VA_BASE             @ virtual
        .endm

diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 7d5c751..70b112e 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00100000
                orr     \rv, \rp, #io_p2v(0x40000000)   @ virtual
                orr     \rp, \rp, #0x40000000           @ physical

diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 90b687c..fb4901c 100644 (file)
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
 #error "Unknown RealView platform"
 #endif
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #DEBUG_LL_UART_OFFSET
                orr     \rv, \rp, #0xfb000000   @ virtual base
                orr     \rp, \rp, #0x10000000   @ physical base

diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 85effff..6d28cc9 100644 (file)
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0x00010000
                orr     \rp, \rp, #0x00000fe0
                orr     \rv, \rp, #0xe0000000   @ virtual

diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 5882dea..4135de8 100644 (file)
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-       .macro addruart, rp, rv
+       .macro addruart, rp, rv, tmp
                ldr     \rp, = S3C24XX_PA_UART
                ldr     \rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0

diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index a29e705..c0c076a 100644 (file)
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
         * aligned and add in the offset when we load the value here.
         */
 
-       .macro addruart, rp, rv
+       .macro addruart, rp, rv, tmp
                ldr     \rp, = S3C_PA_UART
                ldr     \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
 #if CONFIG_DEBUG_S3C_UART != 0

diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 79b04e6..e80ba3c 100644 (file)
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #include <plat/regs-serial.h>
 
-       .macro addruart, rp, rv
+       .macro addruart, rp, rv, tmp
                mov     \rp, #0xE0000000
                orr     \rp, \rp, #0x00100000
                ldr     \rp, [\rp, #0x118 ]

diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index b2ba95d..694f759 100644 (file)
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
         * aligned and add in the offset when we load the value here.
         */
 
-       .macro addruart, rp, rv
+       .macro addruart, rp, rv, tmp
                ldr     \rp, = S3C_PA_UART
                ldr     \rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0

diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 169fe65..79e5559 100644 (file)
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
         * aligned and add in the offset when we load the value here.
         */
 
-       .macro addruart, rp, rv
+       .macro addruart, rp, rv, tmp
                ldr     \rp, = S3C_PA_UART
                ldr     \rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0

diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 0cd0fc9..530772d 100644 (file)
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mrc     p15, 0, \rp, c1, c0
                tst     \rp, #1                 @ MMU enabled?
                moveq   \rp, #0x80000000        @ physical base address

diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index a473f55..20eb2bf 100644 (file)
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #0xe0000000
                orr     \rp, \rp, #0x000003f8
                mov     \rv, \rp

diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index e0ebe65..619abc6 100644 (file)
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 #include <mach/io.h>
 #include <mach/iomap.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
         ldr     \rp, =IO_APB_PHYS       @ physical
         ldr     \rv, =IO_APB_VIRT        @ virtual
        orr     \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)

diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index df71570..8ae8e4a 100644 (file)
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        /* If we move the address using MMU, use this. */
        ldr     \rp,      = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
        ldr     \rv,      = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address

diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 700fb05..8d74d92 100644 (file)
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -35,7 +35,7 @@
 #define UX500_UART(n)  __UX500_UART(n)
 #define UART_BASE      UX500_UART(CONFIG_UX500_DEBUG_UART)
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        ldr     \rp, =UART_BASE                         @ no, physical address
        ldr     \rv, =IO_ADDRESS(UART_BASE)             @ yes, virtual address
        .endm

diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index eb2cf7d..d0fbd7f 100644 (file)
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp,      #0x001F0000
                orr     \rp, \rp, #0x00001000
                orr     \rv, \rp, #0xf1000000   @ virtual base

diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 050d65e..fd9e6c7 100644 (file)
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 
 #define DEBUG_LL_UART_OFFSET   0x00009000
 
-               .macro  addruart,rp,rv
+               .macro  addruart,rp,rv,tmp
                mov     \rp, #DEBUG_LL_UART_OFFSET
                orr     \rv, \rp, #0xf8000000   @ virtual base
                orr     \rp, \rp, #0x10000000   @ physical base

diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
index f119162..ca292f2 100644 (file)
--- a/arch/arm/mach-vt8500/include/mach/debug-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-       .macro  addruart, rp, rv
+       .macro  addruart, rp, rv, tmp
        mov     \rp,      #0x00200000
        orr     \rv, \rp, #0xf8000000
        orr     \rp, \rp, #0xd8000000

diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S
index 9f664d5..3ab0be1 100644 (file)
--- a/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ b/arch/arm/mach-zynq/include/mach/debug-macro.S
@@ -17,7 +17,7 @@
 #include <mach/zynq_soc.h>
 #include <mach/uart.h>
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                ldr     \rp, =LL_UART_PADDR     @ physical
                ldr     \rv, =LL_UART_VADDR     @ virtual
                .endm

diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index e4dde91..a304593 100644 (file)
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -54,7 +54,7 @@
 
 #define UART_VADDR     IMX_IO_ADDRESS(UART_PADDR)
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                ldr     \rp, =UART_PADDR        @ physical
                ldr     \rv, =UART_VADDR        @ virtual
                .endm

diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 8501bbf..02b160a 100644 (file)
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,7 +14,7 @@
 #include <linux/amba/serial.h>
 #include <mach/hardware.h>
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                mov     \rp, #SPEAR_DBG_UART_BASE               @ Physical base
                mov     \rv, #VA_SPEAR_DBG_UART_BASE            @ Virtual base
                .endm

diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
index 7662f73..cf17d04 100644 (file)
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
  *
  */
 
-               .macro  addruart, rp, rv
+               .macro  addruart, rp, rv, tmp
                moveq   \rp, #0x90000000        @ physical base address
                movne   \rv, #0xF1000000        @ virtual base
                orr     \rp, \rp, #0x00007000   @ UART0