ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files

After switching to DM/DTS support of esdhc3 - the code in this patch
can be removed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c
index ab17904..3c7f652 100644 (file)
--- a/board/k+p/kp_imx53/kp_imx53.c
+++ b/board/k+p/kp_imx53/kp_imx53.c
@@ -13,8 +13,6 @@
 #include <asm/arch/iomux-mx53.h>
 #include <asm/arch/clock.h>
 #include <asm/gpio.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
 #include <power/pmic.h>
 #include <fsl_pmic.h>
 #include "kp_id_rev.h"
@@ -53,50 +51,6 @@ int board_ehci_hcd_init(int port)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[] = {
-       {MMC_SDHC3_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-       return 1; /* eMMC is always present */
-}
-
-#define SD_CMD_PAD_CTRL                (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
-                                PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL            (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
-                                PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
-       int ret;
-
-       static const iomux_v3_cfg_t sd3_pads[] = {
-               NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-                            SD_CMD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
-               NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
-       };
-
-       esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-       imx_iomux_v3_setup_multiple_pads(sd3_pads, ARRAY_SIZE(sd3_pads));
-
-       ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-       if (ret)
-               return ret;
-
-       return 0;
-}
-#endif
-
 static int power_init(void)
 {
        struct udevice *dev;

diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h
index f82dcd8..ca6ab0f 100644 (file)
--- a/include/configs/kp_imx53.h
+++ b/include/configs/kp_imx53.h
@@ -15,10 +15,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (32 * SZ_1M)
 
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_ESDHC_NUM       1
-
 /* USB Configs */
 #define CONFIG_USB_EHCI_MX5
 #define CONFIG_MXC_USB_PORT    1