* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (23 commits)
drm/i915: remove full registers dump debug
drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function
drm/i915: Select the correct BPC for LVDS on Ironlake
drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake
drm/i915: Enable/disable the dithering for LVDS based on VBT setting
drm/i915: Permit pinning whilst the device is 'suspended'
drm/i915: Hold struct mutex whilst pinning power context bo.
drm/i915: fix unused var
drm/i915: Storage class should be before const qualifier
drm/i915: remove render reclock support
drm/i915: Fix RC6 suspend/resume
drm/i915: execbuf2 support
drm/i915: Reload hangcheck timer too for Ironlake
drm/i915: only enable hotplug for detected outputs
drm/i915: Track whether cursor needs physical address in intel_device_info
drm/i915: Implement IS_* macros using static tables
drm/i915: Move PCI IDs into i915 driver
drm/i915: Update LVDS connector status when receiving ACPI LID event
drm/i915: Add MALATA PC-81005 to ACPI LID quirk list
drm/i915: implement new pm ops for i915
...
mem = kmap_atomic(pages[page], KM_USER0);
for (i = 0; i < PAGE_SIZE; i += 4)
seq_printf(m, "%08x : %08x\n", i, mem[i / 4]);
- kunmap_atomic(pages[page], KM_USER0);
+ kunmap_atomic(mem, KM_USER0);
}
}
return 0;
}
-static int i915_registers_info(struct seq_file *m, void *data) {
- struct drm_info_node *node = (struct drm_info_node *) m->private;
- struct drm_device *dev = node->minor->dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t reg;
-
-#define DUMP_RANGE(start, end) \
- for (reg=start; reg < end; reg += 4) \
- seq_printf(m, "%08x\t%08x\n", reg, I915_READ(reg));
-
- DUMP_RANGE(0x00000, 0x00fff); /* VGA registers */
- DUMP_RANGE(0x02000, 0x02fff); /* instruction, memory, interrupt control registers */
- DUMP_RANGE(0x03000, 0x031ff); /* FENCE and PPGTT control registers */
- DUMP_RANGE(0x03200, 0x03fff); /* frame buffer compression registers */
- DUMP_RANGE(0x05000, 0x05fff); /* I/O control registers */
- DUMP_RANGE(0x06000, 0x06fff); /* clock control registers */
- DUMP_RANGE(0x07000, 0x07fff); /* 3D internal debug registers */
- DUMP_RANGE(0x07400, 0x088ff); /* GPE debug registers */
- DUMP_RANGE(0x0a000, 0x0afff); /* display palette registers */
- DUMP_RANGE(0x10000, 0x13fff); /* MMIO MCHBAR */
- DUMP_RANGE(0x30000, 0x3ffff); /* overlay registers */
- DUMP_RANGE(0x60000, 0x6ffff); /* display engine pipeline registers */
- DUMP_RANGE(0x70000, 0x72fff); /* display and cursor registers */
- DUMP_RANGE(0x73000, 0x73fff); /* performance counters */
-
- return 0;
-}
-
static int
i915_wedged_open(struct inode *inode,
struct file *filp)
}
static struct drm_info_list i915_debugfs_list[] = {
- {"i915_regs", i915_registers_info, 0},
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
{"i915_gem_inactive", i915_gem_object_list_info, 0, (void *) INACTIVE_LIST},
case I915_PARAM_HAS_PAGEFLIPPING:
value = 1;
break;
+ case I915_PARAM_HAS_EXECBUF2:
+ /* depends on GEM */
+ value = dev_priv->has_gem;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
- param->param);
+ param->param);
return -EINVAL;
}
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mm_node *compressed_fb, *compressed_llb;
- unsigned long cfb_base, ll_base;
+ unsigned long cfb_base;
+ unsigned long ll_base = 0;
/* Leave 1M for line length buffer & misc. */
compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0);
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
- if (IS_MOBILE(dev) || IS_I9XX(dev))
- dev_priv->cursor_needs_physical = true;
- else
- dev_priv->cursor_needs_physical = false;
-
- if (IS_I965G(dev) || IS_G33(dev))
- dev_priv->cursor_needs_physical = false;
-
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
if (ret)
goto destroy_ringbuffer;
+ intel_modeset_init(dev);
+
ret = drm_irq_install(dev);
if (ret)
goto destroy_ringbuffer;
I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
- intel_modeset_init(dev);
-
drm_helper_initial_config(dev);
return 0;
{
struct drm_i915_private *dev_priv = dev->dev_private;
resource_size_t base, size;
- int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+ int ret = 0, mmio_bar;
uint32_t agp_size, prealloc_size, prealloc_start;
/* i915 has 4 more counters */
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
+ dev_priv->info = (struct intel_device_info *) flags;
/* Add register map (needed for suspend/resume) */
+ mmio_bar = IS_I9XX(dev) ? 0 : 1;
base = drm_get_resource_start(dev, mmio_bar);
size = drm_get_resource_len(dev, mmio_bar);
DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
+ DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH),
#include "i915_drm.h"
#include "i915_drv.h"
-#include "drm_pciids.h"
#include <linux/console.h>
#include "drm_crtc_helper.h"
static struct drm_driver driver;
-static struct pci_device_id pciidlist[] = {
- i915_PCI_IDS
+#define INTEL_VGA_DEVICE(id, info) { \
+ .class = PCI_CLASS_DISPLAY_VGA << 8, \
+ .class_mask = 0xffff00, \
+ .vendor = 0x8086, \
+ .device = id, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .driver_data = (unsigned long) info }
+
+const static struct intel_device_info intel_i830_info = {
+ .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_845g_info = {
+ .is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i85x_info = {
+ .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i865g_info = {
+ .is_i8xx = 1,
+};
+
+const static struct intel_device_info intel_i915g_info = {
+ .is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i915gm_info = {
+ .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945g_info = {
+ .is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1,
+};
+const static struct intel_device_info intel_i945gm_info = {
+ .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .has_hotplug = 1, .cursor_needs_physical = 1,
+};
+
+const static struct intel_device_info intel_i965g_info = {
+ .is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_i965gm_info = {
+ .is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1,
+ .is_mobile = 1, .has_fbc = 1, .has_rc6 = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g33_info = {
+ .is_g33 = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_g45_info = {
+ .is_i965g = 1, .is_g4x = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_gm45_info = {
+ .is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1,
+ .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_pineview_info = {
+ .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .is_i9xx = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_d_info = {
+ .is_ironlake = 1, .is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
+ .has_pipe_cxsr = 1,
+ .has_hotplug = 1,
+};
+
+const static struct intel_device_info intel_ironlake_m_info = {
+ .is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1,
+ .need_gfx_hws = 1, .has_rc6 = 1,
+ .has_hotplug = 1,
+};
+
+const static struct pci_device_id pciidlist[] = {
+ INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
+ INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
+ INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),
+ INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),
+ INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),
+ INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info),
+ INTEL_VGA_DEVICE(0x2772, &intel_i945g_info),
+ INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info),
+ INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info),
+ INTEL_VGA_DEVICE(0x2972, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x2982, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x2992, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info),
+ INTEL_VGA_DEVICE(0x29b2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x29c2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x29d2, &intel_g33_info),
+ INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info),
+ INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info),
+ INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info),
+ INTEL_VGA_DEVICE(0x2e02, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e12, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),
+ INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),
+ INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
+ INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
+ INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
+ INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
+ {0, 0, 0}
};
#if defined(CONFIG_DRM_I915_KMS)
return i915_resume(dev);
}
+static int
+i915_pm_suspend(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_SUSPEND);
+}
+
+static int
+i915_pm_resume(struct device *dev)
+{
+ return i915_pci_resume(to_pci_dev(dev));
+}
+
+static int
+i915_pm_freeze(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_FREEZE);
+}
+
+static int
+i915_pm_thaw(struct device *dev)
+{
+ /* thaw during hibernate, do nothing! */
+ return 0;
+}
+
+static int
+i915_pm_poweroff(struct device *dev)
+{
+ return i915_pci_suspend(to_pci_dev(dev), PMSG_HIBERNATE);
+}
+
+static int
+i915_pm_restore(struct device *dev)
+{
+ return i915_pci_resume(to_pci_dev(dev));
+}
+
+const struct dev_pm_ops i915_pm_ops = {
+ .suspend = i915_pm_suspend,
+ .resume = i915_pm_resume,
+ .freeze = i915_pm_freeze,
+ .thaw = i915_pm_thaw,
+ .poweroff = i915_pm_poweroff,
+ .restore = i915_pm_restore,
+};
+
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
.open = drm_gem_vm_open,
.lastclose = i915_driver_lastclose,
.preclose = i915_driver_preclose,
.postclose = i915_driver_postclose,
- .suspend = i915_suspend,
- .resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
.enable_vblank = i915_enable_vblank,
.disable_vblank = i915_disable_vblank,
.id_table = pciidlist,
.probe = i915_pci_probe,
.remove = i915_pci_remove,
-#ifdef CONFIG_PM
- .resume = i915_pci_resume,
- .suspend = i915_pci_suspend,
-#endif
+ .driver.pm = &i915_pm_ops,
},
.name = DRIVER_NAME,
struct intel_overlay;
+struct intel_device_info {
+ u8 is_mobile : 1;
+ u8 is_i8xx : 1;
+ u8 is_i915g : 1;
+ u8 is_i9xx : 1;
+ u8 is_i945gm : 1;
+ u8 is_i965g : 1;
+ u8 is_i965gm : 1;
+ u8 is_g33 : 1;
+ u8 need_gfx_hws : 1;
+ u8 is_g4x : 1;
+ u8 is_pineview : 1;
+ u8 is_ironlake : 1;
+ u8 has_fbc : 1;
+ u8 has_rc6 : 1;
+ u8 has_pipe_cxsr : 1;
+ u8 has_hotplug : 1;
+ u8 cursor_needs_physical : 1;
+};
+
typedef struct drm_i915_private {
struct drm_device *dev;
+ const struct intel_device_info *info;
+
int has_gem;
void __iomem *regs;
int hangcheck_count;
uint32_t last_acthd;
- bool cursor_needs_physical;
-
struct drm_mm vram;
unsigned long cfb_size;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
u32 saveDSPARB;
- u32 saveRENDERSTANDBY;
- u32 savePWRCTXA;
u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u16 orig_clock;
int child_dev_num;
struct child_device_config *child_dev;
+ struct drm_connector *int_lvds_connector;
} drm_i915_private_t;
/** driver private structure attached to each drm_gem_object */
struct drm_file *file_priv);
int i915_gem_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int i915_gem_execbuffer2(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
int i915_gem_pin_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
+bool i915_tiling_ok(struct drm_device *dev, int stride, int size,
+ int tiling_mode);
+bool i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
extern int i915_wrap_ring(struct drm_device * dev);
extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
-#define IS_I830(dev) ((dev)->pci_device == 0x3577)
-#define IS_845G(dev) ((dev)->pci_device == 0x2562)
-#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
-#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
-#define IS_I8XX(dev) (IS_I830(dev) || IS_845G(dev) || IS_I85X(dev) || IS_I865G(dev))
-
-#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
-#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
-#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
-#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
- (dev)->pci_device == 0x27AE)
-#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
- (dev)->pci_device == 0x2982 || \
- (dev)->pci_device == 0x2992 || \
- (dev)->pci_device == 0x29A2 || \
- (dev)->pci_device == 0x2A02 || \
- (dev)->pci_device == 0x2A12 || \
- (dev)->pci_device == 0x2A42 || \
- (dev)->pci_device == 0x2E02 || \
- (dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22 || \
- (dev)->pci_device == 0x2E32 || \
- (dev)->pci_device == 0x2E42 || \
- (dev)->pci_device == 0x0042 || \
- (dev)->pci_device == 0x0046)
-
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
- (dev)->pci_device == 0x2A12)
-
-#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
-
-#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
- (dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22 || \
- (dev)->pci_device == 0x2E32 || \
- (dev)->pci_device == 0x2E42 || \
- IS_GM45(dev))
-
-#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
-#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
-#define IS_PINEVIEW(dev) (IS_PINEVIEW_G(dev) || IS_PINEVIEW_M(dev))
-
-#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
- (dev)->pci_device == 0x29B2 || \
- (dev)->pci_device == 0x29D2 || \
- (IS_PINEVIEW(dev)))
-
+#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info)
+
+#define IS_I830(dev) ((dev)->pci_device == 0x3577)
+#define IS_845G(dev) ((dev)->pci_device == 0x2562)
+#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
+#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
+#define IS_I8XX(dev) (INTEL_INFO(dev)->is_i8xx)
+#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g)
+#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
+#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
+#define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm)
+#define IS_I965G(dev) (INTEL_INFO(dev)->is_i965g)
+#define IS_I965GM(dev) (INTEL_INFO(dev)->is_i965gm)
+#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
+#define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x)
+#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
+#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
+#define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview)
+#define IS_G33(dev) (INTEL_INFO(dev)->is_g33)
#define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042)
#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
-#define IS_IRONLAKE(dev) (IS_IRONLAKE_D(dev) || IS_IRONLAKE_M(dev))
-
-#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
- IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \
- IS_IRONLAKE(dev))
+#define IS_IRONLAKE(dev) (INTEL_INFO(dev)->is_ironlake)
+#define IS_I9XX(dev) (INTEL_INFO(dev)->is_i9xx)
+#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
-#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
- IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \
- IS_PINEVIEW(dev) || IS_IRONLAKE_M(dev))
+#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws)
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \
- IS_IRONLAKE(dev))
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
*/
#define SUPPORTS_EDP(dev) (IS_IRONLAKE_M(dev))
#define SUPPORTS_TV(dev) (IS_I9XX(dev) && IS_MOBILE(dev) && \
!IS_IRONLAKE(dev) && !IS_PINEVIEW(dev))
-#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev))
+#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug)
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IRONLAKE(dev))
-#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
-#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
- (IS_I9XX(dev) || IS_GM45(dev)) && \
- !IS_PINEVIEW(dev) && \
- !IS_IRONLAKE(dev))
-#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IRONLAKE_M(dev))
+#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
+#define I915_HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
+#define I915_HAS_RC6(dev) (INTEL_INFO(dev)->has_rc6)
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
/* blow away mappings if mapped through GTT */
i915_gem_release_mmap(obj);
- if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
- i915_gem_clear_fence_reg(obj);
-
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
BUG_ON(obj_priv->active);
+ /* release the fence reg _after_ flushing */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
+ i915_gem_clear_fence_reg(obj);
+
if (obj_priv->agp_mem != NULL) {
drm_unbind_agp(obj_priv->agp_mem);
drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE);
bool retry_alloc = false;
int ret;
- if (dev_priv->mm.suspended)
- return -EBUSY;
-
if (obj_priv->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to bind a purgeable object\n");
return -EINVAL;
static int
i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
struct drm_file *file_priv,
- struct drm_i915_gem_exec_object *entry,
+ struct drm_i915_gem_exec_object2 *entry,
struct drm_i915_gem_relocation_entry *relocs)
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int i, ret;
void __iomem *reloc_page;
+ bool need_fence;
+
+ need_fence = entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
+ obj_priv->tiling_mode != I915_TILING_NONE;
+
+ /* Check fence reg constraints and rebind if necessary */
+ if (need_fence && !i915_obj_fenceable(dev, obj))
+ i915_gem_object_unbind(obj);
/* Choose the GTT offset for our buffer and put it there. */
ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment);
if (ret)
return ret;
+ /*
+ * Pre-965 chips need a fence register set up in order to
+ * properly handle blits to/from tiled surfaces.
+ */
+ if (need_fence) {
+ ret = i915_gem_object_get_fence_reg(obj);
+ if (ret != 0) {
+ if (ret != -EBUSY && ret != -ERESTARTSYS)
+ DRM_ERROR("Failure to install fence: %d\n",
+ ret);
+ i915_gem_object_unpin(obj);
+ return ret;
+ }
+ }
+
entry->offset = obj_priv->gtt_offset;
/* Apply the relocations, using the GTT aperture to avoid cache
*/
static int
i915_dispatch_gem_execbuffer(struct drm_device *dev,
- struct drm_i915_gem_execbuffer *exec,
+ struct drm_i915_gem_execbuffer2 *exec,
struct drm_clip_rect *cliprects,
uint64_t exec_offset)
{
}
static int
-i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object2 *exec_list,
uint32_t buffer_count,
struct drm_i915_gem_relocation_entry **relocs)
{
}
*relocs = drm_calloc_large(reloc_count, sizeof(**relocs));
- if (*relocs == NULL)
+ if (*relocs == NULL) {
+ DRM_ERROR("failed to alloc relocs, count %d\n", reloc_count);
return -ENOMEM;
+ }
for (i = 0; i < buffer_count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
}
static int
-i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list,
+i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object2 *exec_list,
uint32_t buffer_count,
struct drm_i915_gem_relocation_entry *relocs)
{
}
static int
-i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer *exec,
+i915_gem_check_execbuffer (struct drm_i915_gem_execbuffer2 *exec,
uint64_t exec_offset)
{
uint32_t exec_start, exec_len;
}
int
-i915_gem_execbuffer(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+i915_gem_do_execbuffer(struct drm_device *dev, void *data,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_execbuffer2 *args,
+ struct drm_i915_gem_exec_object2 *exec_list)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_execbuffer *args = data;
- struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_gem_object **object_list = NULL;
struct drm_gem_object *batch_obj;
struct drm_i915_gem_object *obj_priv;
struct drm_clip_rect *cliprects = NULL;
struct drm_i915_gem_relocation_entry *relocs;
- int ret, ret2, i, pinned = 0;
+ int ret = 0, ret2, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains, reloc_index;
int pin_tries, flips;
DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
return -EINVAL;
}
- /* Copy in the exec list from userland */
- exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
object_list = drm_malloc_ab(sizeof(*object_list), args->buffer_count);
- if (exec_list == NULL || object_list == NULL) {
- DRM_ERROR("Failed to allocate exec or object list "
- "for %d buffers\n",
+ if (object_list == NULL) {
+ DRM_ERROR("Failed to allocate object list for %d buffers\n",
args->buffer_count);
ret = -ENOMEM;
goto pre_mutex_err;
}
- ret = copy_from_user(exec_list,
- (struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- sizeof(*exec_list) * args->buffer_count);
- if (ret != 0) {
- DRM_ERROR("copy %d exec entries failed %d\n",
- args->buffer_count, ret);
- goto pre_mutex_err;
- }
if (args->num_cliprects != 0) {
cliprects = kcalloc(args->num_cliprects, sizeof(*cliprects),
mutex_unlock(&dev->struct_mutex);
- if (!ret) {
- /* Copy the new buffer offsets back to the user's exec list. */
- ret = copy_to_user((struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- exec_list,
- sizeof(*exec_list) * args->buffer_count);
- if (ret) {
- ret = -EFAULT;
- DRM_ERROR("failed to copy %d exec entries "
- "back to user (%d)\n",
- args->buffer_count, ret);
- }
- }
-
/* Copy the updated relocations out regardless of current error
* state. Failure to update the relocs would mean that the next
* time userland calls execbuf, it would do so with presumed offset
pre_mutex_err:
drm_free_large(object_list);
- drm_free_large(exec_list);
kfree(cliprects);
return ret;
}
+/*
+ * Legacy execbuffer just creates an exec2 list from the original exec object
+ * list array and passes it to the real function.
+ */
+int
+i915_gem_execbuffer(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_execbuffer *args = data;
+ struct drm_i915_gem_execbuffer2 exec2;
+ struct drm_i915_gem_exec_object *exec_list = NULL;
+ struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+ int ret, i;
+
+#if WATCH_EXEC
+ DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+ (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+ if (args->buffer_count < 1) {
+ DRM_ERROR("execbuf with %d buffers\n", args->buffer_count);
+ return -EINVAL;
+ }
+
+ /* Copy in the exec list from userland */
+ exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
+ exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+ if (exec_list == NULL || exec2_list == NULL) {
+ DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+ args->buffer_count);
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return -ENOMEM;
+ }
+ ret = copy_from_user(exec_list,
+ (struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret != 0) {
+ DRM_ERROR("copy %d exec entries failed %d\n",
+ args->buffer_count, ret);
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return -EFAULT;
+ }
+
+ for (i = 0; i < args->buffer_count; i++) {
+ exec2_list[i].handle = exec_list[i].handle;
+ exec2_list[i].relocation_count = exec_list[i].relocation_count;
+ exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr;
+ exec2_list[i].alignment = exec_list[i].alignment;
+ exec2_list[i].offset = exec_list[i].offset;
+ if (!IS_I965G(dev))
+ exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE;
+ else
+ exec2_list[i].flags = 0;
+ }
+
+ exec2.buffers_ptr = args->buffers_ptr;
+ exec2.buffer_count = args->buffer_count;
+ exec2.batch_start_offset = args->batch_start_offset;
+ exec2.batch_len = args->batch_len;
+ exec2.DR1 = args->DR1;
+ exec2.DR4 = args->DR4;
+ exec2.num_cliprects = args->num_cliprects;
+ exec2.cliprects_ptr = args->cliprects_ptr;
+ exec2.flags = 0;
+
+ ret = i915_gem_do_execbuffer(dev, data, file_priv, &exec2, exec2_list);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ for (i = 0; i < args->buffer_count; i++)
+ exec_list[i].offset = exec2_list[i].offset;
+ /* ... and back out to userspace */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec_list,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret) {
+ ret = -EFAULT;
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+ } else {
+ DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret);
+ }
+
+ drm_free_large(exec_list);
+ drm_free_large(exec2_list);
+ return ret;
+}
+
+int
+i915_gem_execbuffer2(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_execbuffer2 *args = data;
+ struct drm_i915_gem_exec_object2 *exec2_list = NULL;
+ int ret;
+
+#if WATCH_EXEC
+ DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
+ (int) args->buffers_ptr, args->buffer_count, args->batch_len);
+#endif
+
+ if (args->buffer_count < 1) {
+ DRM_ERROR("execbuf2 with %d buffers\n", args->buffer_count);
+ return -EINVAL;
+ }
+
+ exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
+ if (exec2_list == NULL) {
+ DRM_ERROR("Failed to allocate exec list for %d buffers\n",
+ args->buffer_count);
+ return -ENOMEM;
+ }
+ ret = copy_from_user(exec2_list,
+ (struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ sizeof(*exec2_list) * args->buffer_count);
+ if (ret != 0) {
+ DRM_ERROR("copy %d exec entries failed %d\n",
+ args->buffer_count, ret);
+ drm_free_large(exec2_list);
+ return -EFAULT;
+ }
+
+ ret = i915_gem_do_execbuffer(dev, data, file_priv, args, exec2_list);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec2_list,
+ sizeof(*exec2_list) * args->buffer_count);
+ if (ret) {
+ ret = -EFAULT;
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+ }
+
+ drm_free_large(exec2_list);
+ return ret;
+}
+
int
i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
{
if (ret)
return ret;
}
- /*
- * Pre-965 chips need a fence register set up in order to
- * properly handle tiled surfaces.
- */
- if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
- ret = i915_gem_object_get_fence_reg(obj);
- if (ret != 0) {
- if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to install fence: %d\n",
- ret);
- return ret;
- }
- }
+
obj_priv->pin_count++;
/* If the object is not active and not pending a flush,
/**
- * Returns the size of the fence for a tiled object of the given size.
+ * Returns whether an object is currently fenceable. If not, it may need
+ * to be unbound and have its pitch adjusted.
*/
-static int
-i915_get_fence_size(struct drm_device *dev, int size)
+bool
+i915_obj_fenceable(struct drm_device *dev, struct drm_gem_object *obj)
{
- int i;
- int start;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (IS_I965G(dev)) {
/* The 965 can have fences at any page boundary. */
- return ALIGN(size, 4096);
+ if (obj->size & 4095)
+ return false;
+ return true;
+ } else if (IS_I9XX(dev)) {
+ if (obj_priv->gtt_offset & ~I915_FENCE_START_MASK)
+ return false;
} else {
- /* Align the size to a power of two greater than the smallest
- * fence size.
- */
- if (IS_I9XX(dev))
- start = 1024 * 1024;
- else
- start = 512 * 1024;
+ if (obj_priv->gtt_offset & ~I830_FENCE_START_MASK)
+ return false;
+ }
- for (i = start; i < size; i <<= 1)
- ;
+ /* Power of two sized... */
+ if (obj->size & (obj->size - 1))
+ return false;
- return i;
- }
+ /* Objects must be size aligned as well */
+ if (obj_priv->gtt_offset & (obj->size - 1))
+ return false;
+ return true;
}
/* Check pitch constriants for all chips & tiling formats */
-static bool
+bool
i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
{
int tile_width;
if (stride & (stride - 1))
return false;
- /* We don't 0handle the aperture area covered by the fence being bigger
- * than the object size.
- */
- if (i915_get_fence_size(dev, size) != size)
- return false;
-
return true;
}
dev_priv->mm.irq_gem_seqno = seqno;
trace_i915_gem_request_complete(dev, seqno);
DRM_WAKEUP(&dev_priv->irq_queue);
+ dev_priv->hangcheck_count = 0;
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
}
if (de_iir & DE_GSE)
(void) I915_READ(IER);
}
+/*
+ * Must be called after intel_modeset_init or hotplug interrupts won't be
+ * enabled correctly.
+ */
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
if (I915_HAS_HOTPLUG(dev)) {
u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
- /* Leave other bits alone */
- hotplug_en |= HOTPLUG_EN_MASK;
+ /* Note HDMI and DP share bits */
+ if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMIC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
+ hotplug_en |= HDMID_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOC_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
+ hotplug_en |= SDVOB_HOTPLUG_INT_EN;
+ if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS)
+ hotplug_en |= CRT_HOTPLUG_INT_EN;
+ /* Ignore TV since it's buggy */
+
I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
- dev_priv->hotplug_supported_mask = CRT_HOTPLUG_INT_STATUS |
- TV_HOTPLUG_INT_STATUS | SDVOC_HOTPLUG_INT_STATUS |
- SDVOB_HOTPLUG_INT_STATUS;
- if (IS_G4X(dev)) {
- dev_priv->hotplug_supported_mask |=
- HDMIB_HOTPLUG_INT_STATUS |
- HDMIC_HOTPLUG_INT_STATUS |
- HDMID_HOTPLUG_INT_STATUS;
- }
/* Enable in IER... */
enable_mask |= I915_DISPLAY_PORT_INTERRUPT;
/* and unmask in IMR */
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
#define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */
#define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f
-#define HOTPLUG_EN_MASK (HDMIB_HOTPLUG_INT_EN | \
- HDMIC_HOTPLUG_INT_EN | \
- HDMID_HOTPLUG_INT_EN | \
- SDVOB_HOTPLUG_INT_EN | \
- SDVOC_HOTPLUG_INT_EN | \
- CRT_HOTPLUG_INT_EN)
-
#define PORT_HOTPLUG_STAT 0x61114
#define HDMIB_HOTPLUG_INT_STATUS (1 << 29)
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* LVDS dithering flag on 965/g4x platform */
+#define LVDS_ENABLE_DITHER (1 << 25)
/* Enable border for unscaled (or aspect-scaled) display */
#define LVDS_BORDER_ENABLE (1 << 15)
/*
/* Display & cursor control */
+/* dithering flag on Ironlake */
+#define PIPE_ENABLE_DITHER (1 << 4)
/* Pipe A */
#define PIPEADSL 0x70000
#define PIPEACONF 0x70008
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
- /* Render Standby */
- if (I915_HAS_RC6(dev)) {
- dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
- dev_priv->savePWRCTXA = I915_READ(PWRCTXA);
- }
-
/* Hardware status page */
dev_priv->saveHWS = I915_READ(HWS_PGA);
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
- /* Render Standby */
- if (I915_HAS_RC6(dev)) {
- I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
- I915_WRITE(PWRCTXA, dev_priv->savePWRCTXA);
- }
-
/* Hardware status page */
I915_WRITE(HWS_PGA, dev_priv->saveHWS);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
+
+ dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
}
#define IRONLAKE_P2_LVDS_FAST 7 /* double channel */
#define IRONLAKE_P2_DOT_LIMIT 225000 /* 225Mhz */
+#define IRONLAKE_P_DISPLAY_PORT_MIN 10
+#define IRONLAKE_P_DISPLAY_PORT_MAX 20
+#define IRONLAKE_P2_DISPLAY_PORT_FAST 10
+#define IRONLAKE_P2_DISPLAY_PORT_SLOW 10
+#define IRONLAKE_P2_DISPLAY_PORT_LIMIT 0
+#define IRONLAKE_P1_DISPLAY_PORT_MIN 1
+#define IRONLAKE_P1_DISPLAY_PORT_MAX 2
+
static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
static bool
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
.p2_slow = IRONLAKE_P2_SDVO_DAC_SLOW,
.p2_fast = IRONLAKE_P2_SDVO_DAC_FAST },
- .find_pll = intel_ironlake_find_best_PLL,
+ .find_pll = intel_g4x_find_best_PLL,
};
static const intel_limit_t intel_limits_ironlake_lvds = {
.p2 = { .dot_limit = IRONLAKE_P2_DOT_LIMIT,
.p2_slow = IRONLAKE_P2_LVDS_SLOW,
.p2_fast = IRONLAKE_P2_LVDS_FAST },
- .find_pll = intel_ironlake_find_best_PLL,
+ .find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_display_port = {
+ .dot = { .min = IRONLAKE_DOT_MIN,
+ .max = IRONLAKE_DOT_MAX },
+ .vco = { .min = IRONLAKE_VCO_MIN,
+ .max = IRONLAKE_VCO_MAX},
+ .n = { .min = IRONLAKE_N_MIN,
+ .max = IRONLAKE_N_MAX },
+ .m = { .min = IRONLAKE_M_MIN,
+ .max = IRONLAKE_M_MAX },
+ .m1 = { .min = IRONLAKE_M1_MIN,
+ .max = IRONLAKE_M1_MAX },
+ .m2 = { .min = IRONLAKE_M2_MIN,
+ .max = IRONLAKE_M2_MAX },
+ .p = { .min = IRONLAKE_P_DISPLAY_PORT_MIN,
+ .max = IRONLAKE_P_DISPLAY_PORT_MAX },
+ .p1 = { .min = IRONLAKE_P1_DISPLAY_PORT_MIN,
+ .max = IRONLAKE_P1_DISPLAY_PORT_MAX},
+ .p2 = { .dot_limit = IRONLAKE_P2_DISPLAY_PORT_LIMIT,
+ .p2_slow = IRONLAKE_P2_DISPLAY_PORT_SLOW,
+ .p2_fast = IRONLAKE_P2_DISPLAY_PORT_FAST },
+ .find_pll = intel_find_pll_ironlake_dp,
};
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
limit = &intel_limits_ironlake_lvds;
+ else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+ HAS_eDP)
+ limit = &intel_limits_ironlake_display_port;
else
limit = &intel_limits_ironlake_sdvo;
found = false;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ int lvds_reg;
+
+ if (IS_IRONLAKE(dev))
+ lvds_reg = PCH_LVDS;
+ else
+ lvds_reg = LVDS;
+ if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
clock.p2 = limit->p2.p2_fast;
else
{
struct drm_device *dev = crtc->dev;
intel_clock_t clock;
+
+ /* return directly when it is eDP */
+ if (HAS_eDP)
+ return true;
+
if (target < 200000) {
clock.n = 1;
clock.p1 = 2;
return true;
}
-static bool
-intel_ironlake_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- intel_clock_t clock;
- int err_most = 47;
- int err_min = 10000;
-
- /* eDP has only 2 clock choice, no n/m/p setting */
- if (HAS_eDP)
- return true;
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
- return intel_find_pll_ironlake_dp(limit, crtc, target,
- refclk, best_clock);
-
- if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
- clock.p2 = limit->p2.p2_fast;
- else
- clock.p2 = limit->p2.p2_slow;
- } else {
- if (target < limit->p2.dot_limit)
- clock.p2 = limit->p2.p2_slow;
- else
- clock.p2 = limit->p2.p2_fast;
- }
-
- memset(best_clock, 0, sizeof(*best_clock));
- for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
- /* based on hardware requriment prefer smaller n to precision */
- for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
- /* based on hardware requirment prefere larger m1,m2 */
- for (clock.m1 = limit->m1.max;
- clock.m1 >= limit->m1.min; clock.m1--) {
- for (clock.m2 = limit->m2.max;
- clock.m2 >= limit->m2.min; clock.m2--) {
- int this_err;
-
- intel_clock(dev, refclk, &clock);
- if (!intel_PLL_is_valid(crtc, &clock))
- continue;
- this_err = abs((10000 - (target*10000/clock.dot)));
- if (this_err < err_most) {
- *best_clock = clock;
- /* found on first matching */
- goto out;
- } else if (this_err < err_min) {
- *best_clock = clock;
- err_min = this_err;
- }
- }
- }
- }
- }
-out:
- return true;
-}
-
/* DisplayPort has only two frequencies, 162MHz and 270MHz */
static bool
intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
u32 temp;
int tries = 5, j, n;
+ u32 pipe_bpc;
+
+ temp = I915_READ(pipeconf_reg);
+ pipe_bpc = temp & PIPE_BPC_MASK;
/* XXX: When our outputs are all unaware of DPMS modes other than off
* and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
temp = I915_READ(fdi_rx_reg);
+ /*
+ * make the BPC in FDI Rx be consistent with that in
+ * pipeconf reg.
+ */
+ temp &= ~(0x7 << 16);
+ temp |= (pipe_bpc << 11);
I915_WRITE(fdi_rx_reg, temp | FDI_RX_PLL_ENABLE |
FDI_SEL_PCDCLK |
FDI_DP_PORT_WIDTH_X4); /* default 4 lanes */
/* enable PCH transcoder */
temp = I915_READ(transconf_reg);
+ /*
+ * make the BPC in transcoder be consistent with
+ * that in pipeconf reg.
+ */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
I915_WRITE(transconf_reg, temp | TRANS_ENABLE);
I915_READ(transconf_reg);
I915_READ(fdi_tx_reg);
temp = I915_READ(fdi_rx_reg);
+ /* BPC in FDI rx is consistent with that in pipeconf */
+ temp &= ~(0x07 << 16);
+ temp |= (pipe_bpc << 11);
I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
I915_READ(fdi_rx_reg);
}
}
}
-
+ temp = I915_READ(transconf_reg);
+ /* BPC in transcoder is consistent with that in pipeconf */
+ temp &= ~PIPE_BPC_MASK;
+ temp |= pipe_bpc;
+ I915_WRITE(transconf_reg, temp);
+ I915_READ(transconf_reg);
udelay(100);
/* disable PCH DPLL */
* A value of 5us seems to be a good balance; safe for very low end
* platforms but not overly aggressive on lower latency configs.
*/
-const static int latency_ns = 5000;
+static const int latency_ns = 5000;
static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
/* Calc sr entries for one plane configs */
if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 12000;
+ static const int sr_latency_ns = 12000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
/* Calc sr entries for one plane configs */
if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 12000;
+ static const int sr_latency_ns = 12000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
if (HAS_FW_BLC(dev) && sr_hdisplay &&
(!planea_clock || !planeb_clock)) {
/* self-refresh has much higher latency */
- const static int sr_latency_ns = 6000;
+ static const int sr_latency_ns = 6000;
sr_clock = planea_clock ? planea_clock : planeb_clock;
line_time_us = ((sr_hdisplay * 1000) / sr_clock);
/* determine panel color depth */
temp = I915_READ(pipeconf_reg);
+ temp &= ~PIPE_BPC_MASK;
+ if (is_lvds) {
+ int lvds_reg = I915_READ(PCH_LVDS);
+ /* the BPC will be 6 if it is 18-bit LVDS panel */
+ if ((lvds_reg & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+ temp |= PIPE_8BPC;
+ else
+ temp |= PIPE_6BPC;
+ } else
+ temp |= PIPE_8BPC;
+ I915_WRITE(pipeconf_reg, temp);
+ I915_READ(pipeconf_reg);
switch (temp & PIPE_BPC_MASK) {
case PIPE_8BPC:
* appropriately here, but we need to look more thoroughly into how
* panels behave in the two modes.
*/
-
+ /* set the dithering flag */
+ if (IS_I965G(dev)) {
+ if (dev_priv->lvds_dither) {
+ if (IS_IRONLAKE(dev))
+ pipeconf |= PIPE_ENABLE_DITHER;
+ else
+ lvds |= LVDS_ENABLE_DITHER;
+ } else {
+ if (IS_IRONLAKE(dev))
+ pipeconf &= ~PIPE_ENABLE_DITHER;
+ else
+ lvds &= ~LVDS_ENABLE_DITHER;
+ }
+ }
I915_WRITE(lvds_reg, lvds);
I915_READ(lvds_reg);
}
/* we only need to pin inside GTT if cursor is non-phy */
mutex_lock(&dev->struct_mutex);
- if (!dev_priv->cursor_needs_physical) {
+ if (!dev_priv->info->cursor_needs_physical) {
ret = i915_gem_object_pin(bo, PAGE_SIZE);
if (ret) {
DRM_ERROR("failed to pin cursor bo\n");
I915_WRITE(base, addr);
if (intel_crtc->cursor_bo) {
- if (dev_priv->cursor_needs_physical) {
+ if (dev_priv->info->cursor_needs_physical) {
if (intel_crtc->cursor_bo != bo)
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
} else
queue_work(dev_priv->wq, &dev_priv->idle_work);
}
-void intel_increase_renderclock(struct drm_device *dev, bool schedule)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (IS_IRONLAKE(dev))
- return;
-
- if (!dev_priv->render_reclock_avail) {
- DRM_DEBUG_DRIVER("not reclocking render clock\n");
- return;
- }
-
- /* Restore render clock frequency to original value */
- if (IS_G4X(dev) || IS_I9XX(dev))
- pci_write_config_word(dev->pdev, GCFGC, dev_priv->orig_clock);
- else if (IS_I85X(dev))
- pci_write_config_word(dev->pdev, HPLLCC, dev_priv->orig_clock);
- DRM_DEBUG_DRIVER("increasing render clock frequency\n");
-
- /* Schedule downclock */
- if (schedule)
- mod_timer(&dev_priv->idle_timer, jiffies +
- msecs_to_jiffies(GPU_IDLE_TIMEOUT));
-}
-
-void intel_decrease_renderclock(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
-
- if (IS_IRONLAKE(dev))
- return;
-
- if (!dev_priv->render_reclock_avail) {
- DRM_DEBUG_DRIVER("not reclocking render clock\n");
- return;
- }
-
- if (IS_G4X(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~GM45_GC_RENDER_CLOCK_MASK;
- gcfgc |= GM45_GC_RENDER_CLOCK_266_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I965G(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I965_GC_RENDER_CLOCK_MASK;
- gcfgc |= I965_GC_RENDER_CLOCK_267_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I945G(dev) || IS_I945GM(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I945_GC_RENDER_CLOCK_MASK;
- gcfgc |= I945_GC_RENDER_CLOCK_166_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I915G(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~I915_GC_RENDER_CLOCK_MASK;
- gcfgc |= I915_GC_RENDER_CLOCK_166_MHZ;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- } else if (IS_I85X(dev)) {
- u16 hpllcc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, HPLLCC, &hpllcc);
-
- /* Up to maximum... */
- hpllcc &= ~GC_CLOCK_CONTROL_MASK;
- hpllcc |= GC_CLOCK_133_200;
-
- pci_write_config_word(dev->pdev, HPLLCC, hpllcc);
- }
- DRM_DEBUG_DRIVER("decreasing render clock frequency\n");
-}
-
-/* Note that no increase function is needed for this - increase_renderclock()
- * will also rewrite these bits
- */
-void intel_decrease_displayclock(struct drm_device *dev)
-{
- if (IS_IRONLAKE(dev))
- return;
-
- if (IS_I945G(dev) || IS_I945GM(dev) || IS_I915G(dev) ||
- IS_I915GM(dev)) {
- u16 gcfgc;
-
- /* Adjust render clock... */
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
-
- /* Down to minimum... */
- gcfgc &= ~0xf0;
- gcfgc |= 0x80;
-
- pci_write_config_word(dev->pdev, GCFGC, gcfgc);
- }
-}
-
#define CRTC_IDLE_TIMEOUT 1000 /* ms */
static void intel_crtc_idle_timer(unsigned long arg)
mutex_lock(&dev->struct_mutex);
- /* GPU isn't processing, downclock it. */
- if (!dev_priv->busy) {
- intel_decrease_renderclock(dev);
- intel_decrease_displayclock(dev);
- }
-
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
/* Skip inactive CRTCs */
if (!crtc->fb)
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return;
- if (!dev_priv->busy) {
+ if (!dev_priv->busy)
dev_priv->busy = true;
- intel_increase_renderclock(dev, true);
- } else {
+ else
mod_timer(&dev_priv->idle_timer, jiffies +
msecs_to_jiffies(GPU_IDLE_TIMEOUT));
- }
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (!crtc->fb)
bool found = false;
if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ DRM_DEBUG_KMS("probing SDVOB\n");
found = intel_sdvo_init(dev, SDVOB);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+ if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) {
+ DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
intel_hdmi_init(dev, SDVOB);
+ }
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
+ DRM_DEBUG_KMS("probing DP_B\n");
intel_dp_init(dev, DP_B);
+ }
}
/* Before G4X SDVOC doesn't have its own detect register */
- if (I915_READ(SDVOB) & SDVO_DETECTED)
+ if (I915_READ(SDVOB) & SDVO_DETECTED) {
+ DRM_DEBUG_KMS("probing SDVOC\n");
found = intel_sdvo_init(dev, SDVOC);
+ }
if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
- if (SUPPORTS_INTEGRATED_HDMI(dev))
+ if (SUPPORTS_INTEGRATED_HDMI(dev)) {
+ DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
intel_hdmi_init(dev, SDVOC);
- if (SUPPORTS_INTEGRATED_DP(dev))
+ }
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ DRM_DEBUG_KMS("probing DP_C\n");
intel_dp_init(dev, DP_C);
+ }
}
- if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+ if (SUPPORTS_INTEGRATED_DP(dev) &&
+ (I915_READ(DP_D) & DP_DETECTED)) {
+ DRM_DEBUG_KMS("probing DP_D\n");
intel_dp_init(dev, DP_D);
+ }
} else if (IS_I8XX(dev))
intel_dvo_init(dev);
.fb_changed = intelfb_probe,
};
+static struct drm_gem_object *
+intel_alloc_power_context(struct drm_device *dev)
+{
+ struct drm_gem_object *pwrctx;
+ int ret;
+
+ pwrctx = drm_gem_object_alloc(dev, 4096);
+ if (!pwrctx) {
+ DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
+ return NULL;
+ }
+
+ mutex_lock(&dev->struct_mutex);
+ ret = i915_gem_object_pin(pwrctx, 4096);
+ if (ret) {
+ DRM_ERROR("failed to pin power context: %d\n", ret);
+ goto err_unref;
+ }
+
+ ret = i915_gem_object_set_to_gtt_domain(pwrctx, 1);
+ if (ret) {
+ DRM_ERROR("failed to set-domain on power context: %d\n", ret);
+ goto err_unpin;
+ }
+ mutex_unlock(&dev->struct_mutex);
+
+ return pwrctx;
+
+err_unpin:
+ i915_gem_object_unpin(pwrctx);
+err_unref:
+ drm_gem_object_unreference(pwrctx);
+ mutex_unlock(&dev->struct_mutex);
+ return NULL;
+}
+
void intel_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
* GPU can automatically power down the render unit if given a page
* to save state.
*/
- if (I915_HAS_RC6(dev)) {
- struct drm_gem_object *pwrctx;
- struct drm_i915_gem_object *obj_priv;
- int ret;
+ if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {
+ struct drm_i915_gem_object *obj_priv = NULL;
if (dev_priv->pwrctx) {
obj_priv = dev_priv->pwrctx->driver_private;
} else {
- pwrctx = drm_gem_object_alloc(dev, 4096);
- if (!pwrctx) {
- DRM_DEBUG("failed to alloc power context, "
- "RC6 disabled\n");
- goto out;
- }
+ struct drm_gem_object *pwrctx;
- ret = i915_gem_object_pin(pwrctx, 4096);
- if (ret) {
- DRM_ERROR("failed to pin power context: %d\n",
- ret);
- drm_gem_object_unreference(pwrctx);
- goto out;
+ pwrctx = intel_alloc_power_context(dev);
+ if (pwrctx) {
+ dev_priv->pwrctx = pwrctx;
+ obj_priv = pwrctx->driver_private;
}
-
- i915_gem_object_set_to_gtt_domain(pwrctx, 1);
-
- dev_priv->pwrctx = pwrctx;
- obj_priv = pwrctx->driver_private;
}
- I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
- I915_WRITE(MCHBAR_RENDER_STANDBY,
- I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+ if (obj_priv) {
+ I915_WRITE(PWRCTXA, obj_priv->gtt_offset | PWRCTX_EN);
+ I915_WRITE(MCHBAR_RENDER_STANDBY,
+ I915_READ(MCHBAR_RENDER_STANDBY) & ~RCX_SW_EXIT);
+ }
}
-
-out:
- return;
}
/* Set up chip specific display functions */
del_timer_sync(&intel_crtc->idle_timer);
}
- intel_increase_renderclock(dev, false);
del_timer_sync(&dev_priv->idle_timer);
if (dev_priv->display.disable_fbc)
break;
case DP_B:
case PCH_DP_B:
+ dev_priv->hotplug_supported_mask |=
+ HDMIB_HOTPLUG_INT_STATUS;
name = "DPDDC-B";
break;
case DP_C:
case PCH_DP_C:
+ dev_priv->hotplug_supported_mask |=
+ HDMIC_HOTPLUG_INT_STATUS;
name = "DPDDC-C";
break;
case DP_D:
case PCH_DP_D:
+ dev_priv->hotplug_supported_mask |=
+ HDMID_HOTPLUG_INT_STATUS;
name = "DPDDC-D";
break;
}
if (sdvox_reg == SDVOB) {
intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
+ dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == SDVOC) {
intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
+ dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIB) {
intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
+ dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIC) {
intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
+ dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMID) {
intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
+ dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
}
if (!intel_output->ddc_bus)
goto err_connector;
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
},
},
+ {
+ .ident = "PC-81005",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MALATA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
+ },
+ },
{ }
};
struct drm_i915_private *dev_priv =
container_of(nb, struct drm_i915_private, lid_notifier);
struct drm_device *dev = dev_priv->dev;
+ struct drm_connector *connector = dev_priv->int_lvds_connector;
+ /*
+ * check and update the status of LVDS connector after receiving
+ * the LID nofication event.
+ */
+ if (connector)
+ connector->status = connector->funcs->detect(connector);
if (!acpi_lid_open()) {
dev_priv->modeset_on_lid = 1;
return NOTIFY_OK;
{ } /* terminating entry */
};
-#ifdef CONFIG_ACPI
-/*
- * check_lid_device -- check whether @handle is an ACPI LID device.
- * @handle: ACPI device handle
- * @level : depth in the ACPI namespace tree
- * @context: the number of LID device when we find the device
- * @rv: a return value to fill if desired (Not use)
- */
-static acpi_status
-check_lid_device(acpi_handle handle, u32 level, void *context,
- void **return_value)
-{
- struct acpi_device *acpi_dev;
- int *lid_present = context;
-
- acpi_dev = NULL;
- /* Get the acpi device for device handle */
- if (acpi_bus_get_device(handle, &acpi_dev) || !acpi_dev) {
- /* If there is no ACPI device for handle, return */
- return AE_OK;
- }
-
- if (!strncmp(acpi_device_hid(acpi_dev), "PNP0C0D", 7))
- *lid_present = 1;
-
- return AE_OK;
-}
-
-/**
- * check whether there exists the ACPI LID device by enumerating the ACPI
- * device tree.
- */
-static int intel_lid_present(void)
-{
- int lid_present = 0;
-
- if (acpi_disabled) {
- /* If ACPI is disabled, there is no ACPI device tree to
- * check, so assume the LID device would have been present.
- */
- return 1;
- }
-
- acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX,
- check_lid_device, NULL, &lid_present, NULL);
-
- return lid_present;
-}
-#else
-static int intel_lid_present(void)
-{
- /* In the absence of ACPI built in, assume that the LID device would
- * have been present.
- */
- return 1;
-}
-#endif
-
/**
* intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
* @dev: drm device
if (dmi_check_system(intel_no_lvds))
return;
- /*
- * Assume LVDS is present if there's an ACPI lid device or if the
- * device is present in the VBT.
- */
- if (!lvds_is_present_in_vbt(dev) && !intel_lid_present()) {
- DRM_DEBUG_KMS("LVDS is not present in VBT and no lid detected\n");
+ if (!lvds_is_present_in_vbt(dev)) {
+ DRM_DEBUG_KMS("LVDS is not present in VBT\n");
return;
}
DRM_DEBUG_KMS("lid notifier registration failed\n");
dev_priv->lid_notifier.notifier_call = NULL;
}
+ /* keep the LVDS connector */
+ dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
return;
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOB/VGA DDC BUS");
+ dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
} else {
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOC/VGA DDC BUS");
+ dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
}
if (intel_output->ddc_bus == NULL)
drm_connector_attach_property(connector,
dev->mode_config.tv_bottom_margin_property,
tv_priv->margin[TV_MARGIN_BOTTOM]);
+
+ dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS;
out:
drm_sysfs_connector_add(connector);
}
#define DRM_I915_GEM_MADVISE 0x26
#define DRM_I915_OVERLAY_PUT_IMAGE 0x27
#define DRM_I915_OVERLAY_ATTRS 0x28
+#define DRM_I915_GEM_EXECBUFFER2 0x29
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
#define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init)
#define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer)
+#define DRM_IOCTL_I915_GEM_EXECBUFFER2 DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2)
#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin)
#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin)
#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy)
#define I915_PARAM_NUM_FENCES_AVAIL 6
#define I915_PARAM_HAS_OVERLAY 7
#define I915_PARAM_HAS_PAGEFLIPPING 8
+#define I915_PARAM_HAS_EXECBUF2 9
typedef struct drm_i915_getparam {
int param;
__u64 cliprects_ptr;
};
+struct drm_i915_gem_exec_object2 {
+ /**
+ * User's handle for a buffer to be bound into the GTT for this
+ * operation.
+ */
+ __u32 handle;
+
+ /** Number of relocations to be performed on this buffer */
+ __u32 relocation_count;
+ /**
+ * Pointer to array of struct drm_i915_gem_relocation_entry containing
+ * the relocations to be performed in this buffer.
+ */
+ __u64 relocs_ptr;
+
+ /** Required alignment in graphics aperture */
+ __u64 alignment;
+
+ /**
+ * Returned value of the updated offset of the object, for future
+ * presumed_offset writes.
+ */
+ __u64 offset;
+
+#define EXEC_OBJECT_NEEDS_FENCE (1<<0)
+ __u64 flags;
+ __u64 rsvd1;
+ __u64 rsvd2;
+};
+
+struct drm_i915_gem_execbuffer2 {
+ /**
+ * List of gem_exec_object2 structs
+ */
+ __u64 buffers_ptr;
+ __u32 buffer_count;
+
+ /** Offset in the batchbuffer to start execution from. */
+ __u32 batch_start_offset;
+ /** Bytes used in batchbuffer from batch_start_offset */
+ __u32 batch_len;
+ __u32 DR1;
+ __u32 DR4;
+ __u32 num_cliprects;
+ /** This is a struct drm_clip_rect *cliprects */
+ __u64 cliprects_ptr;
+ __u64 flags; /* currently unused */
+ __u64 rsvd1;
+ __u64 rsvd2;
+};
+
struct drm_i915_gem_pin {
/** Handle of the buffer to be pinned. */
__u32 handle;
projects / platform / kernel / linux-rpi.git / commitdiff