arm64: dts: imx8mp-debix-model-a: Remove USB hub reset-gpios

[ Upstream commit 0ce9a2c121e3ab354cf66aeecd3ed0758f3c5067 ]

The SAI2_TXC pin is left unconnected per the imx8mp-debix-model-a
schematics:

https://debix.io/Uploads/Temp/file/20230331/DEBIX%20Model%20A%20Schematics.pdf

Also, the RTS5411E USB hub chip does not have a reset pin.

Remove this pin description to properly describe the hardware.

This also fixes the following schema warning:

hub@1: 'reset-gpios' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml#

Fixes: 0253e1cb6300 ("arm64: dts: imx8mp-debix: add USB host support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 28db9349ed62c41c6162f5d9c3fd96a67b023ede..267ceffc02d84064946540abd205b71caa908c73 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -284,7 +284,6 @@
        usb_hub_2_x: hub@1 {
                compatible = "usbbda,5411";
                reg = <1>;
-               reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
                vdd-supply = <&reg_usb_hub>;
                peer-hub = <&usb_hub_3_x>;
        };
@@ -293,7 +292,6 @@
        usb_hub_3_x: hub@2 {
                compatible = "usbbda,411";
                reg = <2>;
-               reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
                vdd-supply = <&reg_usb_hub>;
                peer-hub = <&usb_hub_2_x>;
        };
@@ -443,7 +441,6 @@
        pinctrl_usb1: usb1grp {
                fsl,pins = <
                        MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR                           0x10
-                       MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                               0x19
                >;
        };