/*
* Copyright (c) 2014-2015,2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
MODULE_FIRMWARE(WIL_FW_NAME_DEFAULT);
MODULE_FIRMWARE(WIL_FW_NAME_SPARROW_PLUS);
MODULE_FIRMWARE(WIL_BOARD_FILE_NAME);
+MODULE_FIRMWARE(WIL_FW_NAME_TALYN);
+MODULE_FIRMWARE(WIL_BRD_NAME_TALYN);
static
void wil_memset_toio_32(volatile void __iomem *dst, u32 val,
#define WAIT_FOR_HALP_VOTE_MS 100
#define WAIT_FOR_SCAN_ABORT_MS 1000
#define WIL_DEFAULT_NUM_RX_STATUS_RINGS 1
+#define WIL_BOARD_FILE_MAX_NAMELEN 128
bool debug_fw; /* = false; */
module_param(debug_fw, bool, 0444);
le32_to_cpus(&r->head);
}
+/* construct actual board file name to use */
+void wil_get_board_file(struct wil6210_priv *wil, char *buf, size_t len)
+{
+ const char *board_file;
+ const char *wil_talyn_fw_name = ftm_mode ? WIL_FW_NAME_FTM_TALYN :
+ WIL_FW_NAME_TALYN;
+
+ if (wil->board_file) {
+ board_file = wil->board_file;
+ } else {
+ /* If specific FW file is used for Talyn,
+ * use specific board file
+ */
+ if (strcmp(wil->wil_fw_name, wil_talyn_fw_name) == 0)
+ board_file = WIL_BRD_NAME_TALYN;
+ else
+ board_file = WIL_BOARD_FILE_NAME;
+ }
+
+ strlcpy(buf, board_file, len);
+}
+
static int wil_get_bl_info(struct wil6210_priv *wil)
{
struct net_device *ndev = wil->main_ndev;
wil_set_oob_mode(wil, oob_mode);
if (load_fw) {
+ char board_file[WIL_BOARD_FILE_MAX_NAMELEN];
+
+ board_file[0] = '\0';
+ wil_get_board_file(wil, board_file, sizeof(board_file));
wil_info(wil, "Use firmware <%s> + board <%s>\n",
- wil->wil_fw_name, WIL_BOARD_FILE_NAME);
+ wil->wil_fw_name, board_file);
if (!no_flash)
wil_bl_prepare_halt(wil);
if (rc)
goto out;
if (wil->brd_file_addr)
- rc = wil_request_board(wil, WIL_BOARD_FILE_NAME);
+ rc = wil_request_board(wil, board_file);
else
- rc = wil_request_firmware(wil,
- WIL_BOARD_FILE_NAME,
- true);
+ rc = wil_request_firmware(wil, board_file, true);
if (rc)
goto out;
module_param(n_msi, int, 0444);
MODULE_PARM_DESC(n_msi, " Use MSI interrupt: 0 - use INTx, 1 - (default) - single, or 3");
-static bool ftm_mode;
+bool ftm_mode;
module_param(ftm_mode, bool, 0444);
MODULE_PARM_DESC(ftm_mode, " Set factory test mode, default - false");
extern bool rx_large_buf;
extern bool debug_fw;
extern bool disable_ap_sme;
+extern bool ftm_mode;
struct wil6210_priv;
struct wil6210_vif;
#define WIL_FW_NAME_TALYN "wil6436.fw"
#define WIL_FW_NAME_FTM_TALYN "wil6436_ftm.fw"
+#define WIL_BRD_NAME_TALYN "wil6436.brd"
#define WIL_BOARD_FILE_NAME "wil6210.brd" /* board & radio parameters */
wil_w(wil, reg, wil_r(wil, reg) & ~val);
}
+void wil_get_board_file(struct wil6210_priv *wil, char *buf, size_t len);
+
#if defined(CONFIG_DYNAMIC_DEBUG)
#define wil_hex_dump_txrx(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \