unsigned long timeout);
/*
+ * This function check_for_surprise_removal is called
+ * while card is removed from the system and it will
+ * read the vendor id from the configration space
+ *
+ * @pdev Pointer to the pci_dev structure.
+ *
+ * return value
+ * true if device removed, else false
+ */
+static bool mtip_check_surprise_removal(struct pci_dev *pdev)
+{
+ u16 vendor_id = 0;
+
+ /* Read the vendorID from the configuration space */
+ pci_read_config_word(pdev, 0x00, &vendor_id);
+ if (vendor_id == 0xFFFF)
+ return true; /* device removed */
+
+ return false; /* device present */
+}
+
+/*
+ * This function is called for clean the pending command in the
+ * command slot during the surprise removal of device and return
+ * error to the upper layer.
+ *
+ * @dd Pointer to the DRIVER_DATA structure.
+ *
+ * return value
+ * None
+ */
+static void mtip_command_cleanup(struct driver_data *dd)
+{
+ int group = 0, commandslot = 0, commandindex = 0;
+ struct mtip_cmd *command;
+ struct mtip_port *port = dd->port;
+
+ for (group = 0; group < 4; group++) {
+ for (commandslot = 0; commandslot < 32; commandslot++) {
+ if (!(port->allocated[group] & (1 << commandslot)))
+ continue;
+
+ commandindex = group << 5 | commandslot;
+ command = &port->commands[commandindex];
+
+ if (atomic_read(&command->active)
+ && (command->async_callback)) {
+ command->async_callback(command->async_data,
+ -ENODEV);
+ command->async_callback = NULL;
+ command->async_data = NULL;
+ }
+
+ dma_unmap_sg(&port->dd->pdev->dev,
+ command->sg,
+ command->scatter_ents,
+ command->direction);
+ }
+ }
+
+ up(&port->cmd_slot);
+
+ atomic_set(&dd->drv_cleanup_done, true);
+}
+
+/*
* Obtain an empty command slot.
*
* This function needs to be reentrant since it could be called
}
/*
- * Issue a command to the hardware.
- *
- * Set the appropriate bit in the s_active and Command Issue hardware
- * registers, causing hardware command processing to begin.
- *
- * @port Pointer to the port structure.
- * @tag The tag of the command to be issued.
+ * Reset the HBA (without sleeping)
*
- * return value
- * None
- */
-static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag)
-{
- unsigned long flags = 0;
-
- atomic_set(&port->commands[tag].active, 1);
-
- spin_lock_irqsave(&port->cmd_issue_lock, flags);
-
- writel((1 << MTIP_TAG_BIT(tag)),
- port->s_active[MTIP_TAG_INDEX(tag)]);
- writel((1 << MTIP_TAG_BIT(tag)),
- port->cmd_issue[MTIP_TAG_INDEX(tag)]);
-
- spin_unlock_irqrestore(&port->cmd_issue_lock, flags);
-}
-
-/*
- * Called periodically to see if any read/write commands are
- * taking too long to complete.
+ * Just like hba_reset, except does not call sleep, so can be
+ * run from interrupt/tasklet context.
*
- * @data Pointer to the PORT data structure.
+ * @dd Pointer to the driver data structure.
*
* return value
- * None
+ * 0 The reset was successful.
+ * -1 The HBA Reset bit did not clear.
*/
-void mtip_timeout_function(unsigned long int data)
+static int hba_reset_nosleep(struct driver_data *dd)
{
- struct mtip_port *port = (struct mtip_port *) data;
- struct host_to_dev_fis *fis;
- struct mtip_cmd *command;
- int tag, cmdto_cnt = 0;
- unsigned int bit, group;
- unsigned int num_command_slots = port->dd->slot_groups * 32;
-
- if (unlikely(!port))
- return;
-
- if (atomic_read(&port->dd->resumeflag) == true) {
- mod_timer(&port->cmd_timer,
- jiffies + msecs_to_jiffies(30000));
- return;
- }
-
- for (tag = 0; tag < num_command_slots; tag++) {
- /*
- * Skip internal command slot as it has
- * its own timeout mechanism
- */
- if (tag == MTIP_TAG_INTERNAL)
- continue;
-
- if (atomic_read(&port->commands[tag].active) &&
- (time_after(jiffies, port->commands[tag].comp_time))) {
- group = tag >> 5;
- bit = tag & 0x1f;
-
- command = &port->commands[tag];
- fis = (struct host_to_dev_fis *) command->command;
-
- dev_warn(&port->dd->pdev->dev,
- "Timeout for command tag %d\n", tag);
-
- cmdto_cnt++;
- if (cmdto_cnt == 1)
- atomic_inc(&port->dd->eh_active);
-
- /*
- * Clear the completed bit. This should prevent
- * any interrupt handlers from trying to retire
- * the command.
- */
- writel(1 << bit, port->completed[group]);
+ unsigned long timeout;
- /* Call the async completion callback. */
- if (likely(command->async_callback))
- command->async_callback(command->async_data,
- -EIO);
- command->async_callback = NULL;
- command->comp_func = NULL;
+ /* Chip quirk: quiesce any chip function */
+ mdelay(10);
- /* Unmap the DMA scatter list entries */
- dma_unmap_sg(&port->dd->pdev->dev,
- command->sg,
- command->scatter_ents,
- command->direction);
+ /* Set the reset bit */
+ writel(HOST_RESET, dd->mmio + HOST_CTL);
- /*
- * Clear the allocated bit and active tag for the
- * command.
- */
- atomic_set(&port->commands[tag].active, 0);
- release_slot(port, tag);
+ /* Flush */
+ readl(dd->mmio + HOST_CTL);
- up(&port->cmd_slot);
- }
- }
+ /*
+ * Wait 10ms then spin for up to 1 second
+ * waiting for reset acknowledgement
+ */
+ timeout = jiffies + msecs_to_jiffies(1000);
+ mdelay(10);
+ while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
+ && time_before(jiffies, timeout))
+ mdelay(1);
- if (cmdto_cnt) {
- dev_warn(&port->dd->pdev->dev,
- "%d commands timed out: restarting port",
- cmdto_cnt);
- mtip_restart_port(port);
- atomic_dec(&port->dd->eh_active);
- }
+ if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
+ return -1;
- /* Restart the timer */
- mod_timer(&port->cmd_timer,
- jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
+ return 0;
}
/*
- * IO completion function.
+ * Issue a command to the hardware.
*
- * This completion function is called by the driver ISR when a
- * command that was issued by the kernel completes. It first calls the
- * asynchronous completion function which normally calls back into the block
- * layer passing the asynchronous callback data, then unmaps the
- * scatter list associated with the completed command, and finally
- * clears the allocated bit associated with the completed command.
+ * Set the appropriate bit in the s_active and Command Issue hardware
+ * registers, causing hardware command processing to begin.
*
- * @port Pointer to the port data structure.
- * @tag Tag of the command.
- * @data Pointer to driver_data.
- * @status Completion status.
+ * @port Pointer to the port structure.
+ * @tag The tag of the command to be issued.
*
* return value
- * None
+ * None
*/
-static void mtip_async_complete(struct mtip_port *port,
- int tag,
- void *data,
- int status)
+static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag)
{
- struct mtip_cmd *command;
- struct driver_data *dd = data;
- int cb_status = status ? -EIO : 0;
-
- if (unlikely(!dd) || unlikely(!port))
- return;
-
- command = &port->commands[tag];
-
- if (unlikely(status == PORT_IRQ_TF_ERR)) {
- dev_warn(&port->dd->pdev->dev,
- "Command tag %d failed due to TFE\n", tag);
- }
-
- /* Upper layer callback */
- if (likely(command->async_callback))
- command->async_callback(command->async_data, cb_status);
-
- command->async_callback = NULL;
- command->comp_func = NULL;
-
- /* Unmap the DMA scatter list entries */
- dma_unmap_sg(&dd->pdev->dev,
- command->sg,
- command->scatter_ents,
- command->direction);
-
- /* Clear the allocated and active bits for the command */
- atomic_set(&port->commands[tag].active, 0);
- release_slot(port, tag);
+ unsigned long flags = 0;
- up(&port->cmd_slot);
-}
+ atomic_set(&port->commands[tag].active, 1);
-/*
- * Internal command completion callback function.
- *
- * This function is normally called by the driver ISR when an internal
- * command completed. This function signals the command completion by
- * calling complete().
- *
- * @port Pointer to the port data structure.
- * @tag Tag of the command that has completed.
- * @data Pointer to a completion structure.
- * @status Completion status.
- *
- * return value
- * None
- */
-static void mtip_completion(struct mtip_port *port,
- int tag,
- void *data,
- int status)
-{
- struct mtip_cmd *command = &port->commands[tag];
- struct completion *waiting = data;
- if (unlikely(status == PORT_IRQ_TF_ERR))
- dev_warn(&port->dd->pdev->dev,
- "Internal command %d completed with TFE\n", tag);
+ spin_lock_irqsave(&port->cmd_issue_lock, flags);
- command->async_callback = NULL;
- command->comp_func = NULL;
+ writel((1 << MTIP_TAG_BIT(tag)),
+ port->s_active[MTIP_TAG_INDEX(tag)]);
+ writel((1 << MTIP_TAG_BIT(tag)),
+ port->cmd_issue[MTIP_TAG_INDEX(tag)]);
- complete(waiting);
+ spin_unlock_irqrestore(&port->cmd_issue_lock, flags);
}
/*
/* Clear SError */
writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);
- /* reset the completed registers.*/
- for (i = 0; i < port->dd->slot_groups; i++)
- writel(0xFFFFFFFF, port->completed[i]);
-
- /* Clear any pending interrupts for this port */
- writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);
-
- /* Enable port interrupts */
- writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
-}
-
-/*
- * Reset the HBA (without sleeping)
- *
- * Just like hba_reset, except does not call sleep, so can be
- * run from interrupt/tasklet context.
- *
- * @dd Pointer to the driver data structure.
- *
- * return value
- * 0 The reset was successful.
- * -1 The HBA Reset bit did not clear.
- */
-int hba_reset_nosleep(struct driver_data *dd)
-{
- unsigned long timeout;
-
- /* Chip quirk: quiesce any chip function */
- mdelay(10);
-
- /* Set the reset bit */
- writel(HOST_RESET, dd->mmio + HOST_CTL);
-
- /* Flush */
- readl(dd->mmio + HOST_CTL);
-
- /*
- * Wait 10ms then spin for up to 1 second
- * waiting for reset acknowledgement
- */
- timeout = jiffies + msecs_to_jiffies(1000);
- mdelay(10);
- while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
- && time_before(jiffies, timeout))
- mdelay(1);
+ /* reset the completed registers.*/
+ for (i = 0; i < port->dd->slot_groups; i++)
+ writel(0xFFFFFFFF, port->completed[i]);
- if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
- return -1;
+ /* Clear any pending interrupts for this port */
+ writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);
- return 0;
+ /* Enable port interrupts */
+ writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
}
/*
* return value
* None
*/
-void mtip_restart_port(struct mtip_port *port)
+static void mtip_restart_port(struct mtip_port *port)
{
unsigned long timeout;
}
/*
+ * Called periodically to see if any read/write commands are
+ * taking too long to complete.
+ *
+ * @data Pointer to the PORT data structure.
+ *
+ * return value
+ * None
+ */
+static void mtip_timeout_function(unsigned long int data)
+{
+ struct mtip_port *port = (struct mtip_port *) data;
+ struct host_to_dev_fis *fis;
+ struct mtip_cmd *command;
+ int tag, cmdto_cnt = 0;
+ unsigned int bit, group;
+ unsigned int num_command_slots = port->dd->slot_groups * 32;
+
+ if (unlikely(!port))
+ return;
+
+ if (atomic_read(&port->dd->resumeflag) == true) {
+ mod_timer(&port->cmd_timer,
+ jiffies + msecs_to_jiffies(30000));
+ return;
+ }
+
+ for (tag = 0; tag < num_command_slots; tag++) {
+ /*
+ * Skip internal command slot as it has
+ * its own timeout mechanism
+ */
+ if (tag == MTIP_TAG_INTERNAL)
+ continue;
+
+ if (atomic_read(&port->commands[tag].active) &&
+ (time_after(jiffies, port->commands[tag].comp_time))) {
+ group = tag >> 5;
+ bit = tag & 0x1f;
+
+ command = &port->commands[tag];
+ fis = (struct host_to_dev_fis *) command->command;
+
+ dev_warn(&port->dd->pdev->dev,
+ "Timeout for command tag %d\n", tag);
+
+ cmdto_cnt++;
+ if (cmdto_cnt == 1)
+ atomic_inc(&port->dd->eh_active);
+
+ /*
+ * Clear the completed bit. This should prevent
+ * any interrupt handlers from trying to retire
+ * the command.
+ */
+ writel(1 << bit, port->completed[group]);
+
+ /* Call the async completion callback. */
+ if (likely(command->async_callback))
+ command->async_callback(command->async_data,
+ -EIO);
+ command->async_callback = NULL;
+ command->comp_func = NULL;
+
+ /* Unmap the DMA scatter list entries */
+ dma_unmap_sg(&port->dd->pdev->dev,
+ command->sg,
+ command->scatter_ents,
+ command->direction);
+
+ /*
+ * Clear the allocated bit and active tag for the
+ * command.
+ */
+ atomic_set(&port->commands[tag].active, 0);
+ release_slot(port, tag);
+
+ up(&port->cmd_slot);
+ }
+ }
+
+ if (cmdto_cnt) {
+ dev_warn(&port->dd->pdev->dev,
+ "%d commands timed out: restarting port",
+ cmdto_cnt);
+ mtip_restart_port(port);
+ atomic_dec(&port->dd->eh_active);
+ }
+
+ /* Restart the timer */
+ mod_timer(&port->cmd_timer,
+ jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
+}
+
+/*
+ * IO completion function.
+ *
+ * This completion function is called by the driver ISR when a
+ * command that was issued by the kernel completes. It first calls the
+ * asynchronous completion function which normally calls back into the block
+ * layer passing the asynchronous callback data, then unmaps the
+ * scatter list associated with the completed command, and finally
+ * clears the allocated bit associated with the completed command.
+ *
+ * @port Pointer to the port data structure.
+ * @tag Tag of the command.
+ * @data Pointer to driver_data.
+ * @status Completion status.
+ *
+ * return value
+ * None
+ */
+static void mtip_async_complete(struct mtip_port *port,
+ int tag,
+ void *data,
+ int status)
+{
+ struct mtip_cmd *command;
+ struct driver_data *dd = data;
+ int cb_status = status ? -EIO : 0;
+
+ if (unlikely(!dd) || unlikely(!port))
+ return;
+
+ command = &port->commands[tag];
+
+ if (unlikely(status == PORT_IRQ_TF_ERR)) {
+ dev_warn(&port->dd->pdev->dev,
+ "Command tag %d failed due to TFE\n", tag);
+ }
+
+ /* Upper layer callback */
+ if (likely(command->async_callback))
+ command->async_callback(command->async_data, cb_status);
+
+ command->async_callback = NULL;
+ command->comp_func = NULL;
+
+ /* Unmap the DMA scatter list entries */
+ dma_unmap_sg(&dd->pdev->dev,
+ command->sg,
+ command->scatter_ents,
+ command->direction);
+
+ /* Clear the allocated and active bits for the command */
+ atomic_set(&port->commands[tag].active, 0);
+ release_slot(port, tag);
+
+ up(&port->cmd_slot);
+}
+
+/*
+ * Internal command completion callback function.
+ *
+ * This function is normally called by the driver ISR when an internal
+ * command completed. This function signals the command completion by
+ * calling complete().
+ *
+ * @port Pointer to the port data structure.
+ * @tag Tag of the command that has completed.
+ * @data Pointer to a completion structure.
+ * @status Completion status.
+ *
+ * return value
+ * None
+ */
+static void mtip_completion(struct mtip_port *port,
+ int tag,
+ void *data,
+ int status)
+{
+ struct mtip_cmd *command = &port->commands[tag];
+ struct completion *waiting = data;
+ if (unlikely(status == PORT_IRQ_TF_ERR))
+ dev_warn(&port->dd->pdev->dev,
+ "Internal command %d completed with TFE\n", tag);
+
+ command->async_callback = NULL;
+ command->comp_func = NULL;
+
+ complete(waiting);
+}
+
+/*
* Helper function for tag logging
*/
static void print_tags(struct driver_data *dd,
* 1 Capacity was returned successfully.
* 0 The identify information is invalid.
*/
-bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors)
+static bool mtip_hw_get_capacity(struct driver_data *dd, sector_t *sectors)
{
struct mtip_port *port = dd->port;
u64 total, raw0, raw1, raw2, raw3;
* return value 0 The command completed successfully.
* return value -1 An error occurred while executing the command.
*/
-int exec_drive_task(struct mtip_port *port, u8 *command)
+static int exec_drive_task(struct mtip_port *port, u8 *command)
{
struct host_to_dev_fis fis;
struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG);
* data to the user space buffer.
* return value -1 An error occurred while executing the command.
*/
-int exec_drive_command(struct mtip_port *port, u8 *command,
- void __user *user_buffer)
+static int exec_drive_command(struct mtip_port *port, u8 *command,
+ void __user *user_buffer)
{
struct host_to_dev_fis fis;
struct host_to_dev_fis *reply = (port->rxfis + RX_FIS_D2H_REG);
* return value
* None
*/
-void mtip_hw_submit_io(struct driver_data *dd,
- sector_t start,
- int nsect,
- int nents,
- int tag,
- void *callback,
- void *data,
- int barrier,
- int dir)
+static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
+ int nsect, int nents, int tag, void *callback,
+ void *data, int barrier, int dir)
{
struct host_to_dev_fis *fis;
struct mtip_port *port = dd->port;
* return value
* None
*/
-void mtip_hw_release_scatterlist(struct driver_data *dd, int tag)
+static void mtip_hw_release_scatterlist(struct driver_data *dd, int tag)
{
release_slot(dd->port, tag);
}
* Pointer to the scatter list for the allocated command slot
* or NULL if no command slots are available.
*/
-struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd,
- int *tag)
+static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd,
+ int *tag)
{
/*
* It is possible that, even with this semaphore, a thread
* 0 Operation completed successfully.
* -EINVAL Invalid parameter.
*/
-int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj)
+static int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj)
{
if (!kobj || !dd)
return -EINVAL;
* 0 Operation completed successfully.
* -EINVAL Invalid parameter.
*/
-int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj)
+static int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj)
{
if (!kobj || !dd)
return -EINVAL;
* return value
* 0 on success, else an error code.
*/
-int mtip_hw_init(struct driver_data *dd)
+static int mtip_hw_init(struct driver_data *dd)
{
int i;
int rv;
* return value
* 0
*/
-int mtip_hw_exit(struct driver_data *dd)
+static int mtip_hw_exit(struct driver_data *dd)
{
/*
* Send standby immediate (E0h) to the drive so that it
* return value
* 0
*/
-int mtip_hw_shutdown(struct driver_data *dd)
+static int mtip_hw_shutdown(struct driver_data *dd)
{
/*
* Send standby immediate (E0h) to the drive so that it
* 0 Suspend was successful
* -EFAULT Suspend was not successful
*/
-int mtip_hw_suspend(struct driver_data *dd)
+static int mtip_hw_suspend(struct driver_data *dd)
{
/*
* Send standby immediate (E0h) to the drive
* 0 Resume was successful
* -EFAULT Resume was not successful
*/
-int mtip_hw_resume(struct driver_data *dd)
+static int mtip_hw_resume(struct driver_data *dd)
{
/* Perform any needed hardware setup steps */
hba_setup(dd);
}
/*
- * This function is called for clean the pending command in the
- * command slot during the surprise removal of device and return
- * error to the upper layer.
- *
- * @dd Pointer to the DRIVER_DATA structure.
- *
- * return value
- * None
- */
-void mtip_command_cleanup(struct driver_data *dd)
-{
- int group = 0, commandslot = 0, commandindex = 0;
- struct mtip_cmd *command;
- struct mtip_port *port = dd->port;
-
- for (group = 0; group < 4; group++) {
- for (commandslot = 0; commandslot < 32; commandslot++) {
- if (!(port->allocated[group] & (1 << commandslot)))
- continue;
-
- commandindex = group << 5 | commandslot;
- command = &port->commands[commandindex];
-
- if (atomic_read(&command->active)
- && (command->async_callback)) {
- command->async_callback(command->async_data,
- -ENODEV);
- command->async_callback = NULL;
- command->async_data = NULL;
- }
-
- dma_unmap_sg(&port->dd->pdev->dev,
- command->sg,
- command->scatter_ents,
- command->direction);
- }
- }
-
- up(&port->cmd_slot);
-
- atomic_set(&dd->drv_cleanup_done, true);
-}
-
-/*
* Helper function for reusing disk name
* upon hot insertion.
*/
* return value
* 0 on success else an error code.
*/
-int mtip_block_initialize(struct driver_data *dd)
+static int mtip_block_initialize(struct driver_data *dd)
{
int rv = 0;
sector_t capacity;
* return value
* 0
*/
-int mtip_block_remove(struct driver_data *dd)
+static int mtip_block_remove(struct driver_data *dd)
{
struct kobject *kobj;
/* Clean up the sysfs attributes managed by the protocol layer. */
* return value
* 0
*/
-int mtip_block_shutdown(struct driver_data *dd)
+static int mtip_block_shutdown(struct driver_data *dd)
{
dev_info(&dd->pdev->dev,
"Shutting down %s ...\n", dd->disk->disk_name);
return 0;
}
-int mtip_block_suspend(struct driver_data *dd)
+static int mtip_block_suspend(struct driver_data *dd)
{
dev_info(&dd->pdev->dev,
"Suspending %s ...\n", dd->disk->disk_name);
return 0;
}
-int mtip_block_resume(struct driver_data *dd)
+static int mtip_block_resume(struct driver_data *dd)
{
dev_info(&dd->pdev->dev, "Resuming %s ...\n",
dd->disk->disk_name);
mtip_block_shutdown(dd);
}
-/*
- * This function check_for_surprise_removal is called
- * while card is removed from the system and it will
- * read the vendor id from the configration space
- *
- * @pdev Pointer to the pci_dev structure.
- *
- * return value
- * true if device removed, else false
- */
-bool mtip_check_surprise_removal(struct pci_dev *pdev)
-{
- u16 vendor_id = 0;
-
- /* Read the vendorID from the configuration space */
- pci_read_config_word(pdev, 0x00, &vendor_id);
- if (vendor_id == 0xFFFF)
- return true; /* device removed */
-
- return false; /* device present */
-}
-
/* Table of device ids supported by this driver. */
static DEFINE_PCI_DEVICE_TABLE(mtip_pci_tbl) = {
{ PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320_DEVICE_ID) },
projects / profile / common / kernel-common.git / commitdiff