i2c: mxc_i2c: Document how non-DM functions work

It is not very clear how these work in relation to the exact I2C xfers
they produce.  In paticular, the address length is somewhat overloaded
in the read method.  Clearly document the existing behavior.  Maybe this
will help the next person who needs to work on this driver and not break
non-DM boards.

Cc: Nandor Han <nandor.han@ge.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>

diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 5420afb..f17a47f 100644 (file)
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -540,6 +540,25 @@ static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf,
 #ifndef CONFIG_DM_I2C
 /*
  * Read data from I2C device
+ *
+ * The transactions use the syntax defined in the Linux kernel I2C docs.
+ *
+ * If alen is > 0, then this function will send a transaction of the form:
+ *     S Chip Wr [A] Addr [A] S Chip Rd [A] [data] A ... NA P
+ * This is a normal I2C register read: writing the register address, then doing
+ * a repeated start and reading the data.
+ *
+ * If alen == 0, then we get this transaction:
+ *     S Chip Wr [A] S Chip Rd [A] [data] A ... NA P
+ * This is somewhat unusual, though valid, transaction.  It addresses the chip
+ * in write mode, but doesn't actually write any register address or data, then
+ * does a repeated start and reads data.
+ *
+ * If alen < 0, then we get this transaction:
+ *     S Chip Rd [A] [data] A ... NA P
+ * The chip is addressed in read mode and then data is read.  No register
+ * address is written first.  This is perfectly valid on most devices and
+ * required on some (usually those that don't act like an array of registers).
  */
 static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
                        int alen, u8 *buf, int len)
@@ -574,6 +593,20 @@ static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
 
 /*
  * Write data to I2C device
+ *
+ * If alen > 0, we get this transaction:
+ *    S Chip Wr [A] addr [A] data [A] ... [A] P
+ * An ordinary write register command.
+ *
+ * If alen == 0, then we get this:
+ *    S Chip Wr [A] data [A] ... [A] P
+ * This is a simple I2C write.
+ *
+ * If alen < 0, then we get this:
+ *    S data [A] ... [A] P
+ * This is most likely NOT something that should be used.  It doesn't send the
+ * chip address first, so in effect, the first byte of data will be used as the
+ * address.
  */
 static int bus_i2c_write(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
                         int alen, const u8 *buf, int len)
@@ -881,6 +914,7 @@ static int mxc_i2c_probe(struct udevice *bus)
        return 0;
 }
 
+/* Sends: S Addr Wr [A|NA] P */
 static int mxc_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
                              u32 chip_flags)
 {