drm/amdgpu: Fix warnings in gfxhub_ v1_0, v1_2.c
authorSrinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Fri, 30 Jun 2023 10:14:26 +0000 (15:44 +0530)
committerAlex Deucher <alexander.deucher@amd.com>
Mon, 10 Jul 2023 13:02:36 +0000 (09:02 -0400)
Fix the below checkpatch warnings:

WARNING: Block comments should align the * on each line
+                       /*
+                       * Raven2 has a HW issue that it is unable to use the

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned num_level, block_size;

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned i;

WARNING: Missing a blank line after declarations
+       u32 tmp;
+       tmp = RREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_CNTL);

WARNING: Block comments should align the * on each line
+                               /*
+                               * Raven2 has a HW issue that it is unable to use the

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+       unsigned num_level, block_size;

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_2.c

index d94cc1e..cdc290a 100644 (file)
@@ -103,7 +103,7 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
                        min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
 
                if (adev->apu_flags & AMD_APU_IS_RAVEN2)
-                       /*
+                      /*
                        * Raven2 has a HW issue that it is unable to use the
                        * vram which is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR.
                        * So here is the workaround that increase system
@@ -248,7 +248,7 @@ static void gfxhub_v1_0_disable_identity_aperture(struct amdgpu_device *adev)
 static void gfxhub_v1_0_setup_vmid_config(struct amdgpu_device *adev)
 {
        struct amdgpu_vmhub *hub = &adev->vmhub[AMDGPU_GFXHUB(0)];
-       unsigned num_level, block_size;
+       unsigned int num_level, block_size;
        uint32_t tmp;
        int i;
 
@@ -308,7 +308,7 @@ static void gfxhub_v1_0_setup_vmid_config(struct amdgpu_device *adev)
 static void gfxhub_v1_0_program_invalidation(struct amdgpu_device *adev)
 {
        struct amdgpu_vmhub *hub = &adev->vmhub[AMDGPU_GFXHUB(0)];
-       unsigned i;
+       unsigned int i;
 
        for (i = 0 ; i < 18; ++i) {
                WREG32_SOC15_OFFSET(GC, 0, mmVM_INVALIDATE_ENG0_ADDR_RANGE_LO32,
@@ -375,6 +375,7 @@ static void gfxhub_v1_0_set_fault_enable_default(struct amdgpu_device *adev,
                                                 bool value)
 {
        u32 tmp;
+
        tmp = RREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_CNTL);
        tmp = REG_SET_FIELD(tmp, VM_L2_PROTECTION_FAULT_CNTL,
                        RANGE_PROTECTION_FAULT_ENABLE_DEFAULT, value);
index 4dabf91..47f95ec 100644 (file)
@@ -140,7 +140,7 @@ gfxhub_v1_2_xcc_init_system_aperture_regs(struct amdgpu_device *adev,
                                min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
 
                        if (adev->apu_flags & AMD_APU_IS_RAVEN2)
-                               /*
+                              /*
                                * Raven2 has a HW issue that it is unable to use the
                                * vram which is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR.
                                * So here is the workaround that increase system
@@ -315,7 +315,7 @@ static void gfxhub_v1_2_xcc_setup_vmid_config(struct amdgpu_device *adev,
                                              uint32_t xcc_mask)
 {
        struct amdgpu_vmhub *hub;
-       unsigned num_level, block_size;
+       unsigned int num_level, block_size;
        uint32_t tmp;
        int i, j;