M: Haavard Skinnemoen <hskinnemoen@gmail.com>
M: Hans-Christian Egtvedt <egtvedt@samfundet.no>
W: http://www.atmel.com/products/AVR32/
-W: http://avr32linux.org/
+W: http://mirror.egtvedt.no/avr32linux.org/
W: http://avrfreaks.net/
S: Maintained
F: arch/avr32/
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif /* __ASM_AVR32_DMA_MAPPING_H */
_dma_sync((dma_addr_t)vaddr, size, dir);
}
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif /* _BLACKFIN_DMA_MAPPING_H */
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h))
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif /* _ASM_C6X_DMA_MAPPING_H */
{
}
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif
flush_write_buffers();
}
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif /* _ASM_DMA_MAPPING_H */
#include <asm-generic/dma-mapping-broken.h>
#endif
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
#endif /* _M68K_DMA_MAPPING_H */
mn10300_dcache_flush_inv();
}
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif
/* At the moment, we panic on error for IOMMU resource exaustion */
#define dma_mapping_error(dev, x) 0
+/* This API cannot be supported on PA-RISC */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif
consistent_sync(vaddr, size, direction);
}
+/* Not supported for now */
+static inline int dma_mmap_coherent(struct device *dev,
+ struct vm_area_struct *vma, void *cpu_addr,
+ dma_addr_t dma_addr, size_t size)
+{
+ return -EINVAL;
+}
+
+static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size)
+{
+ return -EINVAL;
+}
+
#endif /* _XTENSA_DMA_MAPPING_H */
radio->vdev.ioctl_ops = &usb_keene_ioctl_ops;
radio->vdev.lock = &radio->lock;
radio->vdev.release = video_device_release_empty;
+ radio->vdev.vfl_dir = VFL_DIR_TX;
radio->usbdev = interface_to_usbdev(intf);
radio->intf = intf;
.name = "radio-si4713",
.release = video_device_release,
.ioctl_ops = &radio_si4713_ioctl_ops,
+ .vfl_dir = VFL_DIR_TX,
};
/* Platform driver interface */
.ioctl_ops = &wl1273_ioctl_ops,
.name = WL1273_FM_DRIVER_NAME,
.release = wl1273_vdev_release,
+ .vfl_dir = VFL_DIR_TX,
};
static int wl1273_fm_radio_remove(struct platform_device *pdev)
.ioctl_ops = &fm_drv_ioctl_ops,
.name = FM_DRV_NAME,
.release = video_device_release,
+ /*
+ * To ensure both the tuner and modulator ioctls are accessible we
+ * set the vfl_dir to M2M to indicate this.
+ *
+ * It is not really a mem2mem device of course, but it can both receive
+ * and transmit using the same radio device. It's the only radio driver
+ * that does this and it should really be split in two radio devices,
+ * but that would affect applications using this driver.
+ */
+ .vfl_dir = VFL_DIR_M2M,
};
int fm_v4l2_init_video_device(struct fmdev *fmdev, int radio_nr)
{
unsigned long timeout = jiffies + msecs_to_jiffies(1000);
struct i2c_client *client = data;
+ struct rtc_device *rtc = i2c_get_clientdata(client);
int handled = 0, sr, err;
/*
if (sr & ISL1208_REG_SR_ALM) {
dev_dbg(&client->dev, "alarm!\n");
+ rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
+
/* Clear the alarm */
sr &= ~ISL1208_REG_SR_ALM;
sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR, sr);
#define RTC_YMR 0x34 /* Year match register */
#define RTC_YLR 0x38 /* Year data load register */
+#define RTC_CR_EN (1 << 0) /* counter enable bit */
#define RTC_CR_CWEN (1 << 26) /* Clockwatch enable bit */
#define RTC_TCR_EN (1 << 1) /* Periodic timer enable bit */
struct pl031_local *ldata;
struct pl031_vendor_data *vendor = id->data;
struct rtc_class_ops *ops = &vendor->ops;
- unsigned long time;
+ unsigned long time, data;
ret = amba_request_regions(adev, NULL);
if (ret)
dev_dbg(&adev->dev, "designer ID = 0x%02x\n", amba_manf(adev));
dev_dbg(&adev->dev, "revision = 0x%01x\n", amba_rev(adev));
+ data = readl(ldata->base + RTC_CR);
/* Enable the clockwatch on ST Variants */
if (vendor->clockwatch)
- writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
- ldata->base + RTC_CR);
+ data |= RTC_CR_CWEN;
+ writel(data | RTC_CR_EN, ldata->base + RTC_CR);
/*
* On ST PL031 variants, the RTC reset value does not provide correct
return -EINVAL;
}
- writel((bin2bcd(tm->tm_year - 100) << DATE_YEAR_S)
+ writel((bin2bcd(tm->tm_year % 100) << DATE_YEAR_S)
| (bin2bcd(tm->tm_mon + 1) << DATE_MONTH_S)
| (bin2bcd(tm->tm_mday))
| ((tm->tm_year >= 200) << DATE_CENTURY_S),
* Redrawing of screen
*/
-static void clear_buffer_attributes(struct vc_data *vc)
+void clear_buffer_attributes(struct vc_data *vc)
{
unsigned short *p = (unsigned short *)vc->vc_origin;
int count = vc->vc_screenbuf_size / 2;
#include <asm/unaligned.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
+#include <linux/pm_runtime.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
return retval;
}
+/*
+ * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal is
+ * being sent to a root-hub port. The root hub will be prevented from
+ * going into autosuspend until usb_hcd_end_port_resume() is called.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
+{
+ unsigned bit = 1 << portnum;
+
+ if (!(bus->resuming_ports & bit)) {
+ bus->resuming_ports |= bit;
+ pm_runtime_get_noresume(&bus->root_hub->dev);
+ }
+}
+EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
+
+/*
+ * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
+ * @bus: the bus which the root hub belongs to
+ * @portnum: the port which is being resumed
+ *
+ * HCDs should call this function when they know that a resume signal has
+ * stopped being sent to a root-hub port. The root hub will be allowed to
+ * autosuspend again.
+ *
+ * The bus's private lock must be held by the caller.
+ */
+void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
+{
+ unsigned bit = 1 << portnum;
+
+ if (bus->resuming_ports & bit) {
+ bus->resuming_ports &= ~bit;
+ pm_runtime_put_noidle(&bus->root_hub->dev);
+ }
+}
+EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
/*-------------------------------------------------------------------------*/
EXPORT_SYMBOL_GPL(usb_enable_ltm);
#ifdef CONFIG_USB_SUSPEND
+/*
+ * usb_disable_function_remotewakeup - disable usb3.0
+ * device's function remote wakeup
+ * @udev: target device
+ *
+ * Assume there's only one function on the USB 3.0
+ * device and disable remote wake for the first
+ * interface. FIXME if the interface association
+ * descriptor shows there's more than one function.
+ */
+static int usb_disable_function_remotewakeup(struct usb_device *udev)
+{
+ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_INTERFACE,
+ USB_INTRF_FUNC_SUSPEND, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+}
/*
* usb_port_suspend - suspend a usb device's upstream port
dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
port1, status);
/* paranoia: "should not happen" */
- if (udev->do_remote_wakeup)
- (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
+ if (udev->do_remote_wakeup) {
+ if (!hub_is_superspeed(hub->hdev)) {
+ (void) usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else
+ (void) usb_disable_function_remotewakeup(udev);
+
+ }
/* Try to enable USB2 hardware LPM again */
if (udev->usb2_hw_lpm_capable == 1)
* udev->reset_resume
*/
} else if (udev->actconfig && !udev->reset_resume) {
- le16_to_cpus(&devstatus);
- if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
- status = usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE,
+ if (!hub_is_superspeed(udev->parent)) {
+ le16_to_cpus(&devstatus);
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
+ status = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- if (status)
- dev_dbg(&udev->dev,
- "disable remote wakeup, status %d\n",
- status);
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ status = usb_get_status(udev, USB_RECIP_INTERFACE, 0,
+ &devstatus);
+ le16_to_cpus(&devstatus);
+ if (!status && devstatus & (USB_INTRF_STAT_FUNC_RW_CAP
+ | USB_INTRF_STAT_FUNC_RW))
+ status =
+ usb_disable_function_remotewakeup(udev);
}
+
+ if (status)
+ dev_dbg(&udev->dev,
+ "disable remote wakeup, status %d\n",
+ status);
status = 0;
}
return status;
ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
set_bit(i, &ehci->resuming_ports);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
+ usb_hcd_start_port_resume(&hcd->self, i);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
}
status = STS_PCD;
}
}
- /* FIXME autosuspend idle root hubs */
+
+ /* If a resume is in progress, make sure it can finish */
+ if (ehci->resuming_ports)
+ mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25));
+
spin_unlock_irqrestore (&ehci->lock, flags);
return status ? retval : 0;
}
/* resume signaling for 20 msec */
ehci->reset_done[wIndex] = jiffies
+ msecs_to_jiffies(20);
+ usb_hcd_start_port_resume(&hcd->self, wIndex);
/* check the port again */
mod_timer(&ehci_to_hcd(ehci)->rh_timer,
ehci->reset_done[wIndex]);
clear_bit(wIndex, &ehci->suspended_ports);
set_bit(wIndex, &ehci->port_c_suspend);
ehci->reset_done[wIndex] = 0;
+ usb_hcd_end_port_resume(&hcd->self, wIndex);
/* stop resume signaling */
temp = ehci_readl(ehci, status_reg);
ehci->reset_done[wIndex] = 0;
if (temp & PORT_PE)
set_bit(wIndex, &ehci->port_c_suspend);
+ usb_hcd_end_port_resume(&hcd->self, wIndex);
}
if (temp & PORT_OC)
if (ehci->async_iaa || ehci->async_unlinking)
return;
- /* Do all the waiting QHs at once */
- ehci->async_iaa = ehci->async_unlink;
- ehci->async_unlink = NULL;
-
/* If the controller isn't running, we don't have to wait for it */
if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) {
+
+ /* Do all the waiting QHs */
+ ehci->async_iaa = ehci->async_unlink;
+ ehci->async_unlink = NULL;
+
if (!nested) /* Avoid recursion */
end_unlink_async(ehci);
/* Otherwise start a new IAA cycle */
} else if (likely(ehci->rh_state == EHCI_RH_RUNNING)) {
+ struct ehci_qh *qh;
+
+ /* Do only the first waiting QH (nVidia bug?) */
+ qh = ehci->async_unlink;
+ ehci->async_iaa = qh;
+ ehci->async_unlink = qh->unlink_next;
+ qh->unlink_next = NULL;
+
/* Make sure the unlinks are all visible to the hardware */
wmb();
}
}
+static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
static void unlink_empty_async(struct ehci_hcd *ehci)
{
- struct ehci_qh *qh, *next;
- bool stopped = (ehci->rh_state < EHCI_RH_RUNNING);
+ struct ehci_qh *qh;
+ struct ehci_qh *qh_to_unlink = NULL;
bool check_unlinks_later = false;
+ int count = 0;
- /* Unlink all the async QHs that have been empty for a timer cycle */
- next = ehci->async->qh_next.qh;
- while (next) {
- qh = next;
- next = qh->qh_next.qh;
-
+ /* Find the last async QH which has been empty for a timer cycle */
+ for (qh = ehci->async->qh_next.qh; qh; qh = qh->qh_next.qh) {
if (list_empty(&qh->qtd_list) &&
qh->qh_state == QH_STATE_LINKED) {
- if (!stopped && qh->unlink_cycle ==
- ehci->async_unlink_cycle)
+ ++count;
+ if (qh->unlink_cycle == ehci->async_unlink_cycle)
check_unlinks_later = true;
else
- single_unlink_async(ehci, qh);
+ qh_to_unlink = qh;
}
}
- /* Start a new IAA cycle if any QHs are waiting for it */
- if (ehci->async_unlink)
- start_iaa_cycle(ehci, false);
+ /* If nothing else is being unlinked, unlink the last empty QH */
+ if (!ehci->async_iaa && !ehci->async_unlink && qh_to_unlink) {
+ start_unlink_async(ehci, qh_to_unlink);
+ --count;
+ }
- /* QHs that haven't been empty for long enough will be handled later */
- if (check_unlinks_later) {
+ /* Other QHs will be handled later */
+ if (count > 0) {
ehci_enable_event(ehci, EHCI_HRTIMER_ASYNC_UNLINKS, true);
++ehci->async_unlink_cycle;
}
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
}
ehci->now_frame = now_frame;
+ frame = ehci->last_iso_frame;
for (;;) {
union ehci_shadow q, *q_p;
__hc32 type, *hw_p;
- frame = ehci->last_iso_frame;
restart:
/* scan each element in frame's queue for completions */
q_p = &ehci->pshadow [frame];
/* Stop when we have reached the current frame */
if (frame == now_frame)
break;
- ehci->last_iso_frame = (frame + 1) & fmask;
+
+ /* The last frame may still have active siTDs */
+ ehci->last_iso_frame = frame;
+ frame = (frame + 1) & fmask;
}
}
if (want != actual) {
- /* Poll again later, but give up after about 20 ms */
- if (ehci->ASS_poll_count++ < 20) {
- ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
- return;
- }
- ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n",
- want, actual);
+ /* Poll again later */
+ ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
+ ++ehci->ASS_poll_count;
+ return;
}
+
+ if (ehci->ASS_poll_count > 20)
+ ehci_dbg(ehci, "ASS poll count reached %d\n",
+ ehci->ASS_poll_count);
ehci->ASS_poll_count = 0;
/* The status is up-to-date; restart or stop the schedule as needed */
if (want != actual) {
- /* Poll again later, but give up after about 20 ms */
- if (ehci->PSS_poll_count++ < 20) {
- ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
- return;
- }
- ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n",
- want, actual);
+ /* Poll again later */
+ ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
+ return;
}
+
+ if (ehci->PSS_poll_count > 20)
+ ehci_dbg(ehci, "PSS poll count reached %d\n",
+ ehci->PSS_poll_count);
ehci->PSS_poll_count = 0;
/* The status is up-to-date; restart or stop the schedule as needed */
"defaulting to EHCI.\n");
dev_warn(&xhci_pdev->dev,
"USB 3.0 devices will work at USB 2.0 speeds.\n");
+ usb_disable_xhci_ports(xhci_pdev);
return;
}
}
}
clear_bit(port, &uhci->resuming_ports);
+ usb_hcd_end_port_resume(&uhci_to_hcd(uhci)->self, port);
}
/* Wait for the UHCI controller in HP's iLO2 server management chip.
set_bit(port, &uhci->resuming_ports);
uhci->ports_timeout = jiffies +
msecs_to_jiffies(25);
+ usb_hcd_start_port_resume(
+ &uhci_to_hcd(uhci)->self, port);
/* Make sure we see the port again
* after the resuming period is over. */
faked_port_index + 1);
if (slot_id && xhci->devs[slot_id])
xhci_ring_device(xhci, slot_id);
- if (bus_state->port_remote_wakeup && (1 << faked_port_index)) {
+ if (bus_state->port_remote_wakeup & (1 << faked_port_index)) {
bus_state->port_remote_wakeup &=
~(1 << faked_port_index);
xhci_test_and_clear_bit(xhci, port_array,
(trb_comp_code != COMP_STALL &&
trb_comp_code != COMP_BABBLE))
xhci_urb_free_priv(xhci, urb_priv);
+ else
+ kfree(urb_priv);
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
if ((urb->actual_length != urb->transfer_buffer_length &&
* running_total.
*/
packets_transferred = (running_total + trb_buff_len) /
- usb_endpoint_maxp(&urb->ep->desc);
+ GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
if ((total_packet_count - packets_transferred) > 31)
return 31 << 17;
td_len = urb->iso_frame_desc[i].length;
td_remain_len = td_len;
total_packet_count = DIV_ROUND_UP(td_len,
- usb_endpoint_maxp(&urb->ep->desc));
+ GET_MAX_PACKET(
+ usb_endpoint_maxp(&urb->ep->desc)));
/* A zero-length transfer still involves at least one packet. */
if (total_packet_count == 0)
total_packet_count++;
td = urb_priv->td[i];
for (j = 0; j < trbs_per_td; j++) {
u32 remainder = 0;
- field = TRB_TBC(burst_count) | TRB_TLBPC(residue);
+ field = 0;
if (first_trb) {
+ field = TRB_TBC(burst_count) |
+ TRB_TLBPC(residue);
/* Queue the isoc TRB */
field |= TRB_TYPE(TRB_ISOC);
/* Assume URB_ISO_ASAP is set */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
/*
* ELV devices:
*/
+ { USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
#define XSENS_CONVERTER_6_PID 0xD38E
#define XSENS_CONVERTER_7_PID 0xD38F
+/**
+ * Zolix (www.zolix.com.cb) product ids
+ */
+#define FTDI_OMNI1509 0xD491 /* Omni1509 embedded USB-serial */
+
/*
* NDI (www.ndigital.com) product ids
*/
/*
* ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
- * All of these devices use FTDI's vendor ID (0x0403).
+ * Almost all of these devices use FTDI's vendor ID (0x0403).
* Further IDs taken from ELV Windows .inf file.
*
* The previously included PID for the UO 100 module was incorrect.
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_ELV_VID 0x1B1F /* ELV AG */
+#define FTDI_ELV_WS300_PID 0xC006 /* eQ3 WS 300 PC II */
#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
#define TELIT_PRODUCT_CC864_DUAL 0x1005
#define TELIT_PRODUCT_CC864_SINGLE 0x1006
#define TELIT_PRODUCT_DE910_DUAL 0x1010
+#define TELIT_PRODUCT_LE920 0x1200
/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
#define TPLINK_VENDOR_ID 0x2357
#define TPLINK_PRODUCT_MA180 0x0201
+/* Changhong products */
+#define CHANGHONG_VENDOR_ID 0x2077
+#define CHANGHONG_PRODUCT_CH690 0x7001
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
.reserved = BIT(3) | BIT(4),
};
+static const struct option_blacklist_info telit_le920_blacklist = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(1) | BIT(5),
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
+ .driver_info = (kernel_ulong_t)&telit_le920_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
{DEVICE_G1K(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
{DEVICE_G1K(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
{DEVICE_G1K(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
+ {DEVICE_G1K(0x1bc7, 0x900e)}, /* Telit Gobi QDL device */
/* Gobi 2000 devices */
{USB_DEVICE(0x1410, 0xa010)}, /* Novatel Gobi 2000 QDL device */
return 0;
}
-/* This places the HUAWEI E220 devices in multi-port mode */
-int usb_stor_huawei_e220_init(struct us_data *us)
+/* This places the HUAWEI usb dongles in multi-port mode */
+static int usb_stor_huawei_feature_init(struct us_data *us)
{
int result;
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
+
+/*
+ * It will send a scsi switch command called rewind' to huawei dongle.
+ * When the dongle receives this command at the first time,
+ * it will reboot immediately. After rebooted, it will ignore this command.
+ * So it is unnecessary to read its response.
+ */
+static int usb_stor_huawei_scsi_init(struct us_data *us)
+{
+ int result = 0;
+ int act_len = 0;
+ struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
+ char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+ bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
+ bcbw->Tag = 0;
+ bcbw->DataTransferLength = 0;
+ bcbw->Flags = bcbw->Lun = 0;
+ bcbw->Length = sizeof(rewind_cmd);
+ memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
+ memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
+
+ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
+ US_BULK_CB_WRAP_LEN, &act_len);
+ US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
+ return result;
+}
+
+/*
+ * It tries to find the supported Huawei USB dongles.
+ * In Huawei, they assign the following product IDs
+ * for all of their mobile broadband dongles,
+ * including the new dongles in the future.
+ * So if the product ID is not included in this list,
+ * it means it is not Huawei's mobile broadband dongles.
+ */
+static int usb_stor_huawei_dongles_pid(struct us_data *us)
+{
+ struct usb_interface_descriptor *idesc;
+ int idProduct;
+
+ idesc = &us->pusb_intf->cur_altsetting->desc;
+ idProduct = us->pusb_dev->descriptor.idProduct;
+ /* The first port is CDROM,
+ * means the dongle in the single port mode,
+ * and a switch command is required to be sent. */
+ if (idesc && idesc->bInterfaceNumber == 0) {
+ if ((idProduct == 0x1001)
+ || (idProduct == 0x1003)
+ || (idProduct == 0x1004)
+ || (idProduct >= 0x1401 && idProduct <= 0x1500)
+ || (idProduct >= 0x1505 && idProduct <= 0x1600)
+ || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
+ return 1;
+ }
+ }
+ return 0;
+}
+
+int usb_stor_huawei_init(struct us_data *us)
+{
+ int result = 0;
+
+ if (usb_stor_huawei_dongles_pid(us)) {
+ if (us->pusb_dev->descriptor.idProduct >= 0x1446)
+ result = usb_stor_huawei_scsi_init(us);
+ else
+ result = usb_stor_huawei_feature_init(us);
+ }
+ return result;
+}
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-/* This places the HUAWEI E220 devices in multi-port mode */
-int usb_stor_huawei_e220_init(struct us_data *us);
+/* This places the HUAWEI usb dongles in multi-port mode */
+int usb_stor_huawei_init(struct us_data *us);
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
+UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
- 0),
-UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
- "HUAWEI MOBILE",
- "Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
.useTransport = use_transport, \
}
+#define UNUSUAL_VENDOR_INTF(idVendor, cl, sc, pr, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
static struct us_unusual_dev us_unusual_dev_list[] = {
# include "unusual_devs.h"
{ } /* Terminating entry */
#undef UNUSUAL_DEV
#undef COMPLIANT_DEV
#undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
#ifdef CONFIG_LOCKDEP
#define USUAL_DEV(useProto, useTrans) \
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans) }
+/* Define the device is matched with Vendor ID and interface descriptors */
+#define UNUSUAL_VENDOR_INTF(id_vendor, cl, sc, pr, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ \
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
+ | USB_DEVICE_ID_MATCH_VENDOR, \
+ .idVendor = (id_vendor), \
+ .bInterfaceClass = (cl), \
+ .bInterfaceSubClass = (sc), \
+ .bInterfaceProtocol = (pr), \
+ .driver_info = (flags) \
+}
+
struct usb_device_id usb_storage_usb_ids[] = {
# include "unusual_devs.h"
{ } /* Terminating entry */
#undef UNUSUAL_DEV
#undef COMPLIANT_DEV
#undef USUAL_DEV
+#undef UNUSUAL_VENDOR_INTF
/*
* The table of devices to ignore
}
/* Setup default font */
- if (!p->fontdata) {
+ if (!p->fontdata && !vc->vc_font.data) {
if (!fontname[0] || !(font = find_font(fontname)))
font = get_default_font(info->var.xres,
info->var.yres,
vc->vc_font.height = font->height;
vc->vc_font.data = (void *)(p->fontdata = font->data);
vc->vc_font.charcount = 256; /* FIXME Need to support more fonts */
+ } else {
+ p->fontdata = vc->vc_font.data;
}
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
ops->p = &fb_display[fg_console];
}
-static void fbcon_free_font(struct display *p)
+static void fbcon_free_font(struct display *p, bool freefont)
{
- if (p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
+ if (freefont && p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
kfree(p->fontdata - FONT_EXTRA_WORDS * sizeof(int));
p->fontdata = NULL;
p->userfont = 0;
struct fb_info *info;
struct fbcon_ops *ops;
int idx;
+ bool free_font = true;
- fbcon_free_font(p);
idx = con2fb_map[vc->vc_num];
if (idx == -1)
if (!info)
goto finished;
+ if (info->flags & FBINFO_MISC_FIRMWARE)
+ free_font = false;
ops = info->fbcon_par;
if (!ops)
ops->flags &= ~FBCON_FLAGS_INIT;
finished:
+ fbcon_free_font(p, free_font);
+
if (!con_is_bound(&fb_con))
fbcon_exit();
unsigned short video_port_status = vga_video_port_reg + 6;
int font_select = 0x00, beg, i;
char *charmap;
-
+ bool clear_attribs = false;
if (vga_video_type != VIDEO_TYPE_EGAM) {
charmap = (char *) VGA_MAP_MEM(colourmap, 0);
beg = 0x0e;
/* if 512 char mode is already enabled don't re-enable it. */
if ((set) && (ch512 != vga_512_chars)) {
- /* attribute controller */
- for (i = 0; i < MAX_NR_CONSOLES; i++) {
- struct vc_data *c = vc_cons[i].d;
- if (c && c->vc_sw == &vga_con)
- c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
- }
vga_512_chars = ch512;
/* 256-char: enable intensity bit
512-char: disable intensity bit */
it means, but it works, and it appears necessary */
inb_p(video_port_status);
vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0);
+ clear_attribs = true;
}
raw_spin_unlock_irq(&vga_lock);
+
+ if (clear_attribs) {
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ struct vc_data *c = vc_cons[i].d;
+ if (c && c->vc_sw == &vga_con) {
+ /* force hi font mask to 0, so we always clear
+ the bit on either transition */
+ c->vc_hi_font_mask = 0x00;
+ clear_buffer_attributes(c);
+ c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
+ }
+ }
+ }
return 0;
}
#endif
return -EINVAL;
-#ifdef CONFIG_COMPAT
- if (count > sizeof(struct dlm_write_request32) + DLM_RESNAME_MAXLEN)
-#else
+ /*
+ * can't compare against COMPAT/dlm_write_request32 because
+ * we don't yet know if is64bit is zero
+ */
if (count > sizeof(struct dlm_write_request) + DLM_RESNAME_MAXLEN)
-#endif
return -EINVAL;
kbuf = kzalloc(count + 1, GFP_NOFS);
if (ret < 0)
printk(KERN_ERR "NILFS: GC failed during preparation: "
"cannot read source blocks: err=%d\n", ret);
- else
+ else {
+ if (nilfs_sb_need_update(nilfs))
+ set_nilfs_discontinued(nilfs);
ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+ }
nilfs_remove_all_gcinodes(nilfs);
clear_nilfs_gc_running(nilfs);
* the slab_mutex must be held when looping through those caches
*/
#define for_each_memcg_cache_index(_idx) \
- for ((_idx) = 0; i < memcg_limited_groups_array_size; (_idx)++)
+ for ((_idx) = 0; (_idx) < memcg_limited_groups_array_size; (_idx)++)
static inline bool memcg_kmem_enabled(void)
{
* Therefore notifier chains can only be traversed when either
*
* 1. mmap_sem is held.
- * 2. One of the reverse map locks is held (i_mmap_mutex or anon_vma->mutex).
+ * 2. One of the reverse map locks is held (i_mmap_mutex or anon_vma->rwsem).
* 3. No other concurrent thread can access the list (release)
*/
struct mmu_notifier {
int bandwidth_int_reqs; /* number of Interrupt requests */
int bandwidth_isoc_reqs; /* number of Isoc. requests */
+ unsigned resuming_ports; /* bit array: resuming root-hub ports */
+
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
struct mon_bus *mon_bus; /* non-null when associated */
int monitored; /* non-zero when monitored */
extern void usb_wakeup_notification(struct usb_device *hdev,
unsigned int portnum);
+extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
+extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
+
/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
int con_get_cmap(unsigned char __user *cmap);
void scrollback(struct vc_data *vc, int lines);
void scrollfront(struct vc_data *vc, int lines);
+void clear_buffer_attributes(struct vc_data *vc);
void update_region(struct vc_data *vc, unsigned long start, int count);
void redraw_screen(struct vc_data *vc, int is_switch);
#define update_screen(x) redraw_screen(x, 0)
#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+/*
+ * Interface status, Figure 9-5 USB 3.0 spec
+ */
+#define USB_INTRF_STAT_FUNC_RW_CAP 1
+#define USB_INTRF_STAT_FUNC_RW 2
+
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
if (flags & FOLL_WRITE && !pmd_write(*pmd))
goto out;
+ /* Avoid dumping huge zero page */
+ if ((flags & FOLL_DUMP) && is_huge_zero_pmd(*pmd))
+ return ERR_PTR(-EFAULT);
+
page = pmd_page(*pmd);
VM_BUG_ON(!PageHead(page));
if (flags & FOLL_TOUCH) {
if (!huge_pte_none(huge_ptep_get(ptep))) {
pte = huge_ptep_get_and_clear(mm, address, ptep);
pte = pte_mkhuge(pte_modify(pte, newprot));
+ pte = arch_make_huge_pte(pte, vma, NULL, 0);
set_huge_pte_at(mm, address, ptep, pte);
pages++;
}
if (is_write_migration_entry(entry))
pte = pte_mkwrite(pte);
#ifdef CONFIG_HUGETLB_PAGE
- if (PageHuge(new))
+ if (PageHuge(new)) {
pte = pte_mkhuge(pte);
+ pte = arch_make_huge_pte(pte, vma, new, 0);
+ }
#endif
flush_cache_page(vma, addr, pte_pfn(pte));
set_pte_at(mm, addr, ptep, pte);
* vma in this mm is backed by the same anon_vma or address_space.
*
* We can take all the locks in random order because the VM code
- * taking i_mmap_mutex or anon_vma->mutex outside the mmap_sem never
+ * taking i_mmap_mutex or anon_vma->rwsem outside the mmap_sem never
* takes more than one of them in a row. Secondly we're protected
* against a concurrent mm_take_all_locks() by the mm_all_locks_mutex.
*
# Try to match the kernel target.
ifndef CONFIG_64BIT
+ifndef CROSS_COMPILE
# s390 has -m31 flag to build 31 bit binaries
ifndef CONFIG_S390
HOSTLOADLIBES_bpf-fancy += $(MFLAG)
HOSTLOADLIBES_dropper += $(MFLAG)
endif
+endif
# Tell kbuild to always build the programs
always := $(hostprogs-y)
our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
our $Lval = qr{$Ident(?:$Member)*};
-our $Float_hex = qr{(?i:0x[0-9a-f]+p-?[0-9]+[fl]?)};
-our $Float_dec = qr{(?i:((?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?))};
-our $Float_int = qr{(?i:[0-9]+e-?[0-9]+[fl]?)};
+our $Float_hex = qr{(?i)0x[0-9a-f]+p-?[0-9]+[fl]?};
+our $Float_dec = qr{(?i)(?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?};
+our $Float_int = qr{(?i)[0-9]+e-?[0-9]+[fl]?};
our $Float = qr{$Float_hex|$Float_dec|$Float_int};
-our $Constant = qr{(?:$Float|(?i:(?:0x[0-9a-f]+|[0-9]+)[ul]*))};
-our $Assignment = qr{(?:\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=)};
+our $Constant = qr{$Float|(?i)(?:0x[0-9a-f]+|[0-9]+)[ul]*};
+our $Assignment = qr{\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=};
our $Compare = qr{<=|>=|==|!=|<|>};
our $Operators = qr{
<=|>=|==|!=|
--- /dev/null
+slabinfo
+page-types
projects / platform / kernel / linux-arm64.git / commitdiff