+++ /dev/null
-#!/usr/bin/env perl
-use strict;
-use warnings;
-use Cwd qw(abs_path);
-use File::Path qw(mkpath);
-use File::Basename;
-
-if ( !$ARGV[0] ) {
- print "Usage: penv.pl <dir>\n";
- exit;
-}
-
-my $abs = abs_path( $ARGV[0] );
-
-mkpath "$abs/bin";
-
-open my $file, '>', "$abs/bin/activate-perl";
-while (<DATA>) {
- $_ =~ s/{{ PENV }}/$abs/g;
- print $file $_;
-}
-close($file);
-
-__DATA__
-# This file must be used with "source bin/activate" *from bash*
-# you cannot run it directly
-
-deactivate () {
- # reset old environment variables
- if [ -n "$_OLD_VIRTUAL_PATH" ] ; then
- PATH="$_OLD_VIRTUAL_PATH"
- export PATH
- unset _OLD_VIRTUAL_PATH
- fi
-
- unset MODULEBUILDRC
- unset PERL_MM_OPT
- unset PERL5LIB
-
- # This should detect bash and zsh, which have a hash command that must
- # be called to get it to forget past commands. Without forgetting
- # past commands the $PATH changes we made may not be respected
- if [ -n "$BASH" -o -n "$ZSH_VERSION" ] ; then
- hash -r
- fi
-
- if [ -n "$_OLD_VIRTUAL_PS1" ] ; then
- PS1="$_OLD_VIRTUAL_PS1"
- export PS1
- unset _OLD_VIRTUAL_PS1
- fi
-
- unset VIRTUAL_ENV
- if [ ! "$1" = "nondestructive" ] ; then
- # Self destruct!
- unset -f deactivate
- fi
-}
-
-# unset irrelavent variables
-deactivate nondestructive
-
-VIRTUAL_ENV="{{ PENV }}"
-export VIRTUAL_ENV
-
-_OLD_VIRTUAL_PATH="$PATH"
-PATH="$VIRTUAL_ENV/bin:$PATH"
-export PATH
-
-if [ -z "$VIRTUAL_ENV_DISABLE_PROMPT" ] ; then
- _OLD_VIRTUAL_PS1="$PS1"
- if [ "`basename \"$VIRTUAL_ENV\"`" = "__" ] ; then
- # special case for Aspen magic directories
- # see http://www.zetadev.com/software/aspen/
- PS1="[`basename \`dirname \"$VIRTUAL_ENV\"\``] $PS1"
- else
- PS1="(`basename \"$VIRTUAL_ENV\"`)$PS1"
- fi
- export PS1
-fi
-
-# This should detect bash and zsh, which have a hash command that must
-# be called to get it to forget past commands. Without forgetting
-# past commands the $PATH changes we made may not be respected
-if [ -n "$BASH" -o -n "$ZSH_VERSION" ] ; then
- hash -r
-fi
-eval $(perl -I{{ PENV }}/perl5/lib/perl5 -Mlocal::lib={{ PENV }})
+++ /dev/null
-#!/usr/bin/perl -w
-#
-# SMOCK - Simpler Mock
-# by Dan Berrange and Richard W.M. Jones.
-# Copyright (C) 2008 Red Hat Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-use strict;
-
-use Getopt::Long;
-use Pod::Usage;
-use File::Temp qw(tempfile);
-
-my @arches = ();
-my $chain = 0;
-my @distros = ();
-my $dryrun = 0;
-my $help = 0;
-my $keepgoing = 0;
-my $localrepo = $ENV{HOME} . "/public_html/smock/yum";
-my $man = 0;
-my $overwrite = 0;
-my $suffix = "";
-
-GetOptions (
- "arch=s" => \@arches,
- "chain" => \$chain,
- "distro=s" => \@distros,
- "dryrun" => \$dryrun,
- "help|?" => \$help,
- "keepgoing" => \$keepgoing,
- "localrepo=s" => \$localrepo,
- "man" => \$man,
- "overwrite" => \$overwrite,
- "suffix=s" => \$suffix,
- ) or pod2usage (2);
-pod2usage (1) if $help;
-pod2usage (-exitstatus => 0, -verbose => 2) if $man;
-
-=pod
-
-=head1 NAME
-
- smock - Simpler mock
-
-=head1 SYNOPSIS
-
- smock.pl --arch=i386 --arch=x86_64 --distro=fedora-10 list of SRPMs ...
-
-=head1 DESCRIPTION
-
-This is a wrapper around I<mock> which lets you build a whole group of
-mutually dependent SRPMs in one go.
-
-The smock command will work out the correct order in which to build
-the SRPMs, and makes the result of previous RPM builds available as
-dependencies for later builds.
-
-Smock also works incrementally. It won't rebuild RPMs which were
-built already in a previous run, which means if a package fails to
-build, you can just fix it and rerun the same smock command. (In the
-unlikely case that you want to force smock to rebuild RPMs then you
-must bump the release number or delete the binary RPM from the
-localrepo directory).
-
-B<NOTE:> Please read the README file first. You need to set up mock
-and optionally a web server before you can use this command.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<--arch>
-
-Specify the architecture(s) to build, eg. i386, x86_64. You can
-list this option several times to build several architectures.
-
-=item B<--chain>
-
-Don't run any commands, just print the packages in the correct
-format for chain building. See:
-L<http://fedoraproject.org/wiki/Koji/UsingKoji#Chained_builds>
-
-=item B<--distro>
-
-Specify the distribution(s) to build, eg. fedora-9, fedora-10.
-You can list this option several times to build several distributions.
-
-=item B<--dryrun>
-
-Don't run any commands, just print the packages in the order
-in which they must be built.
-
-=item B<--help>
-
-Print this help.
-
-=item B<--keepgoing>
-
-Don't exit if a package fails, but keep building.
-
-Note that this isn't always safe because new packages may be built
-against older packages, in the case where the older package couldn't
-be rebuilt because of an error.
-
-However, it is very useful.
-
-=item B<--localrepo>
-
-Local repository. Defaults to C<$HOME/public_html/smock/yum>
-
-=item B<--man>
-
-Show this help using man.
-
-=item B<--overwrite>
-
-Overwrite existing files that are already in the repository. By default the
-build of an SRPM is skipped if there is already a package with the same name,
-version and release in the localrepo. With this option, the new build
-overwrites the old one. This may lead to unexpected results, if the new build
-does not create the same subpackages as the old one, because then the old
-subpackages will still be accessible in the repository.
-
-=item B<--suffix>
-
-Append a suffix to the mock configuration file in order to use
-a custom one.
-
-=back
-
-=cut
-
-my @srpms = @ARGV;
-
-if (0 == @arches) {
- die "smock: specify one or more architectures using --arch=<arch>\n"
-}
-
-if (0 == @distros) {
- die "smock: specify one or more distros using --distro=<distro>\n"
-}
-
-if (0 == @srpms) {
- die "smock: specify one or more SRPMs to build on the command line\n"
-}
-
-# Resolve the names, dependency list, etc. of the SRPMs that were
-# specified.
-
-sub get_one_line
-{
- open PIPE, "$_[0] |" or die "$_[0]: $!";
- my $line = <PIPE>;
- chomp $line;
- close PIPE;
- return $line;
-}
-
-sub get_lines
-{
- local $_;
- open PIPE, "$_[0] |" or die "$_[0]: $!";
- my @lines;
- foreach (<PIPE>) {
- chomp;
- push @lines, $_;
- }
- close PIPE;
- return @lines;
-}
-
-my %srpms = ();
-foreach my $srpm (@srpms) {
- my $name = get_one_line "rpm -q --qf '%{name}' -p '$srpm'";
- my $version = get_one_line "rpm -q --qf '%{version}' -p '$srpm'";
- my $release = get_one_line "rpm -q --qf '%{release}' -p '$srpm'";
-
- my @buildrequires = get_lines "rpm -q --requires -p '$srpm' |
- grep -Eo '^[^[:space:]]+'";
-
- #print "Filename: $srpm\n";
- #print " name = $name\n";
- #print " version = $version\n";
- #print " release = $release\n";
- #print " buildrequires = ", join (",", @buildrequires), "\n";
-
- $srpms{$name} = {
- name => $name,
- version => $version,
- release => $release,
- buildrequires => \@buildrequires,
- filename => $srpm
- }
-}
-
-# We don't care about buildrequires unless they refer to other
-# packages that we are building. So filter them on this condition.
-
-sub is_member_of
-{
- my $item = shift;
-
- foreach (@_) {
- return 1 if $item eq $_;
- }
- 0;
-}
-
-sub dependency_in
-{
- my $dep = shift; # eg. dbus-devel
-
- while ($dep) {
- return $dep if is_member_of ($dep, @_);
- my $newdep = $dep;
- $newdep =~ s/-\w+$//; # eg. dbus-devel -> dbus
- last if $newdep eq $dep;
- $dep = $newdep;
- }
- 0;
-}
-
-foreach my $name (keys %srpms) {
- my @buildrequires = @{$srpms{$name}->{buildrequires}};
- @buildrequires =
- grep { $_ = dependency_in ($_, keys %srpms) } @buildrequires;
- $srpms{$name}{buildrequires} = \@buildrequires;
-}
-
-# This function takes a list of package names and sorts them into the
-# correct order for building, given the existing %srpms hash
-# containing buildrequires. We use the external 'tsort' program.
-
-sub tsort
-{
- my @names = @_;
-
- my ($fh, $filename) = tempfile ();
-
- foreach my $name (@names) {
- my @buildrequires = @{$srpms{$name}->{buildrequires}};
- foreach (@buildrequires) {
- print $fh "$_ $name\n"
- }
- # Add a self->self dependency. This ensures that any
- # packages which don't have or appear as a dependency of
- # any other package still get built.
- print $fh "$name $name\n"
- }
- close $fh;
-
- get_lines "tsort $filename";
-}
-
-# Sort the initial list of package names.
-
-my @names = sort keys %srpms;
-my @buildorder = tsort (@names);
-
-# With --chain flag we print the packages in groups for chain building.
-
-if ($chain) {
- my %group = ();
- my $name;
-
- print 'make chain-build CHAIN="';
-
- foreach $name (@buildorder) {
- my @br = @{$srpms{$name}->{buildrequires}};
-
- # If a BR occurs within the current group, then start the next group.
- my $occurs = 0;
- foreach (@br) {
- if (exists $group{$_}) {
- $occurs = 1;
- last;
- }
- }
-
- if ($occurs) {
- %group = ();
- print ": ";
- }
-
- $group{$name} = 1;
- print "$name ";
- }
- print "\"\n";
-
- exit 0
-}
-
-# With --dryrun flag we just print the packages in build order then exit.
-
-if ($dryrun) {
- foreach (@buildorder) {
- print "$_\n";
- }
-
- exit 0
-}
-
-# Now we can build each SRPM.
-
-sub my_mkdir
-{
- local $_ = $_[0];
-
- if (! -d $_) {
- mkdir ($_, 0755) or die "mkdir $_: $!"
- }
-}
-
-sub createrepo
-{
- my $arch = shift;
- my $distro = shift;
-
- my_mkdir "$localrepo/$distro";
- my_mkdir "$localrepo/$distro/src";
- my_mkdir "$localrepo/$distro/src/SRPMS";
- system ("cd $localrepo/$distro/src && rm -rf repodata && createrepo -q .") == 0
- or die "createrepo failed: $?\n";
-
- my_mkdir "$localrepo/$distro/$arch";
- my_mkdir "$localrepo/$distro/$arch/RPMS";
- my_mkdir "$localrepo/$distro/$arch/logs";
-
- system ("cd $localrepo/$distro/$arch && rm -rf repodata && createrepo -q --exclude 'logs/*rpm' .") == 0
- or die "createrepo failed: $?\n";
-}
-
-if (! -d "$localrepo/scratch") {
- mkdir "$localrepo/scratch"
- or die "mkdir $localrepo/scratch: $!\nIf you haven't set up a local repository yet, you must read the README file.\n";
-}
-
-system "rm -rf $localrepo/scratch/*";
-
-my @errors = ();
-
-# NB: Need to do the arch/distro in the outer loop to work
-# around the caching bug in mock/yum.
-foreach my $arch (@arches) {
- foreach my $distro (@distros) {
- foreach my $name (@buildorder) {
- my $version = $srpms{$name}->{version};
- my $release = $srpms{$name}->{release};
- my $srpm_filename = $srpms{$name}->{filename};
-
- $release =~ s/\.fc?\d+$//; # "1.fc9" -> "1"
-
- # Does the built (binary) package exist already?
- my $pattern = "$localrepo/$distro/$arch/RPMS/$name-$version-$release.*.rpm";
- #print "pattern = $pattern\n";
- my @binaries = glob $pattern;
-
- if (@binaries != 0 && $overwrite) {
- print "*** overwriting $name-$version-$release $arch $distro ***\n";
- }
-
- if (@binaries == 0 || $overwrite)
- {
- # Rebuild the package.
- print "*** building $name-$version-$release $arch $distro ***\n";
-
- createrepo ($arch, $distro);
-
- my $scratchdir = "$localrepo/scratch/$name-$distro-$arch";
- mkdir $scratchdir;
-
- if (system ("mock -r $distro-$arch$suffix --resultdir $scratchdir $srpm_filename") == 0) {
- # Build was a success so move the final RPMs into the
- # mock repo for next time.
- system ("mv $scratchdir/*.src.rpm $localrepo/$distro/src/SRPMS") == 0 or die "mv";
- system ("mv $scratchdir/*.rpm $localrepo/$distro/$arch/RPMS") == 0 or die "mv";
- my_mkdir "$localrepo/$distro/$arch/logs/$name-$version-$release";
- system ("mv $scratchdir/*.log $localrepo/$distro/$arch/logs/$name-$version-$release/") == 0 or die "mv";
- system "rm -rf $scratchdir";
-
- createrepo ($arch, $distro);
-
- }
- else {
- push @errors, "$name-$distro-$arch$suffix";
- print STDERR "Build failed, return code $?\nLeaving the logs in $scratchdir\n";
- exit 1 unless $keepgoing;
- }
- }
- else
- {
- print "skipping $name-$version-$release $arch $distro\n";
- }
- }
- }
-}
-
-if (@errors) {
- print "\n\n\nBuild failed for the following packages:\n";
- print " $_\n" foreach @errors;
- exit 1
-}
-
-exit 0
projects / tools / depanneur.git / commitdiff