--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
+ *
+ * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "MYIR Tech LPC4357 Development Board";
+ compatible = "myir,myd-lpc4357", "nxp,lpc4357";
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ memory@28000000 {
+ device_type = "memory";
+ reg = <0x28000000 0x2000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led5 {
+ gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led6 {
+ gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ panel: panel {
+ compatible = "innolux,at070tn92";
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&lcdc_output>;
+ };
+ };
+ };
+
+ vcc: vcc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vmmc: vmmc_fixed {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&pinctrl {
+ can0_pins: can0-pins {
+ can_rd_cfg {
+ pins = "p3_1";
+ function = "can0";
+ input-enable;
+ };
+
+ can_td_cfg {
+ pins = "p3_2";
+ function = "can0";
+ };
+ };
+
+ can1_pins: can1-pins {
+ can_rd_cfg {
+ pins = "pe_1";
+ function = "can1";
+ input-enable;
+ };
+
+ can_td_cfg {
+ pins = "pe_0";
+ function = "can1";
+ };
+ };
+
+ emc_pins: emc-pins {
+ emc_addr0_22_cfg {
+ pins = "p2_9", "p2_10", "p2_11", "p2_12",
+ "p2_13", "p1_0", "p1_1", "p1_2",
+ "p2_8", "p2_7", "p2_6", "p2_2",
+ "p2_1", "p2_0", "p6_8", "p6_7",
+ "pd_16", "pd_15", "pe_0", "pe_1",
+ "pe_2", "pe_3", "pe_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_data0_15_cfg {
+ pins = "p1_7", "p1_8", "p1_9", "p1_10",
+ "p1_11", "p1_12", "p1_13", "p1_14",
+ "p5_4", "p5_5", "p5_6", "p5_7",
+ "p5_0", "p5_1", "p5_2", "p5_3";
+ function = "emc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_we_oe_cfg {
+ pins = "p1_6", "p1_3";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_cs0_cfg {
+ pins = "p1_5";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_dqm0_1_cfg {
+ pins = "p6_12", "p6_10";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_ras_cas_cfg {
+ pins = "p6_5", "p6_4";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_dycs0_cfg {
+ pins = "p6_9";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_cke_cfg {
+ pins = "p6_11";
+ function = "emc";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ emc_sdram_clock_cfg {
+ pins = "clk0";
+ function = "emc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+ };
+
+ enet_rmii_pins: enet-rmii-pins {
+ enet_rmii_rxd_cfg {
+ pins = "p1_15", "p0_0";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_txd_cfg {
+ pins = "p1_18", "p1_20";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_rx_dv_cfg {
+ pins = "p1_16";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ enet_mdio_cfg {
+ pins = "p1_17";
+ function = "enet";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ enet_mdc_cfg {
+ pins = "pc_1";
+ function = "enet";
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ enet_rmii_tx_en_cfg {
+ pins = "p0_1";
+ function = "enet";
+ bias-disable;
+ };
+
+ enet_ref_clk_cfg {
+ pins = "p1_19";
+ function = "enet";
+ slew-rate = <1>;
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+ };
+
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ i2c1_pins_cfg {
+ pins = "pe_15", "pe_13";
+ function = "i2c1";
+ input-enable;
+ };
+ };
+
+ lcd_pins: lcd-pins {
+ lcd_vd0_23_cfg {
+ pins = "p4_1", "p4_4", "p4_3", "p4_2",
+ "p8_7", "p8_6", "p8_5", "p8_4",
+ "p7_5", "p4_8", "p4_10", "p4_9",
+ "p8_3", "pb_6", "pb_5", "pb_4",
+ "p7_4", "p7_3", "p7_2", "p7_1",
+ "pb_3", "pb_2", "pb_1", "pb_0";
+ function = "lcd";
+ };
+
+ lcd_vsync_en_dclk_lp_pwr_cfg {
+ pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
+ function = "lcd";
+ };
+ };
+
+ led_pins: led-pins {
+ led_1_6_cfg {
+ pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ sdmmc_pins: sdmmc-pins {
+ sdmmc_clk_cfg {
+ pins = "pc_0";
+ function = "sdmmc";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ sdmmc_cmd_dat0_3_cfg {
+ pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
+ function = "sdmmc";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ sdmmc_cd_cfg {
+ pins = "pc_8";
+ function = "sdmmc";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_sck_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ spifi_mosi_miso_sio2_sio3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ bias-disable;
+ };
+ };
+
+ ssp1_pins: ssp1-pins {
+ ssp1_sck_cfg {
+ pins = "pf_4";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_miso_cfg {
+ pins = "pf_6";
+ function = "ssp1";
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_mosi_cfg {
+ pins = "pf_7";
+ function = "ssp1";
+ slew-rate = <1>;
+ bias-pull-down;
+ };
+
+ ssp1_ssel_cfg {
+ pins = "pf_5";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rxd_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ input-enable;
+ input-schmitt-disable;
+ bias-disable;
+ };
+
+ uart0_clk_dir_txd_cfg {
+ pins = "pf_8", "pf_9", "pf_10";
+ function = "uart0";
+ bias-pull-down;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ uart1_rxd_cfg {
+ pins = "pc_14";
+ function = "uart1";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart1_dtr_txd_cfg {
+ pins = "pc_12", "pc_13";
+ function = "uart1";
+ bias-pull-down;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ uart2_rxd_cfg {
+ pins = "pa_2";
+ function = "uart2";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart2_txd_cfg {
+ pins = "pa_1";
+ function = "uart2";
+ bias-pull-down;
+ };
+ };
+
+ uart3_pins: uart3-pins {
+ uart3_rx_cfg {
+ pins = "p2_4";
+ function = "uart3";
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ uart3_tx_cfg {
+ pins = "p2_3";
+ function = "uart3";
+ bias-pull-down;
+ };
+ };
+
+ usb0_pins: usb0-pins {
+ usb0_pwr_enable_cfg {
+ pins = "p6_3";
+ function = "usb0";
+ };
+
+ usb0_pwr_fault_cfg {
+ pins = "p8_0";
+ function = "usb0";
+ bias-disable;
+ input-enable;
+ };
+ };
+};
+
+&adc1 {
+ status = "okay";
+ vref-supply = <&vcc>;
+};
+
+&can0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins>;
+};
+
+/* Pin conflict with EMC, muxed by JP5 and JP6 */
+&can1 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1_pins>;
+};
+
+&emc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emc_pins>;
+
+ cs0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ mpmc,cs = <0>;
+ mpmc,memory-width = <16>;
+ mpmc,byte-lane-low;
+ mpmc,write-enable-delay = <0>;
+ mpmc,output-enable-delay = <0>;
+ mpmc,read-access-delay = <70>;
+ mpmc,page-mode-read-delay = <70>;
+
+ /* SST/Microchip SST39VF1601 */
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x400000>;
+ bank-width = <2>;
+ };
+ };
+};
+
+&enet_tx_clk {
+ clock-frequency = <50000000>;
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ sensor@49 {
+ compatible = "lm75";
+ reg = <0x49>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ };
+};
+
+&lcdc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ max-memory-bandwidth = <92240000>;
+
+ port {
+ lcdc_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+};
+
+&mac {
+ status = "okay";
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&enet_rmii_pins>;
+ phy-handle = <&phy1>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&mmcsd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pins>;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>;
+};
+
+/* Pin conflict with SSP0, the latter is routed to J17 pin header */
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ /* Atmel AT25DF321A */
+ flash {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <51000000>;
+ spi-cpol;
+ spi-cpha;
+ };
+};
+
+&ssp1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp1_pins>;
+ num-cs = <1>;
+ cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
+};
+
+/* Routed to J17 pin header */
+&uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+/* RS485 */
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+/* Routed to J17 pin header */
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&usb0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+};
projects / platform / kernel / linux-rpi.git / commitdiff