ARM: dts: lan966x: add support for pcb8309

Add basic support for pcb8309. It is similar with pcb8291 with one big
difference that is having 2 SFP cages. Therefore it has 4 network ports.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220722131836.2377720-3-horatiu.vultur@microchip.com

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 184899808ee73795a6081e31370a4eb6c3d829cb..6a6166e3a4052cb0b4f238425d83933aae5cd38f 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -772,7 +772,8 @@ dtb-$(CONFIG_SOC_IMXRT) += \
 dtb-$(CONFIG_SOC_LAN966) += \
        lan966x-pcb8291.dtb \
        lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
-       lan966x-kontron-kswitch-d10-mmt-8g.dtb
+       lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+       lan966x-pcb8309.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
        ls1021a-iot.dtb \
        ls1021a-moxa-uc-8410a.dtb \

diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
new file mode 100644 (file)
index 0000000..05ce27e
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8309.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+       model = "Microchip EVB - LAN9662";
+       compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+       aliases {
+               serial0 = &usart3;
+               i2c102 = &i2c102;
+               i2c103 = &i2c103;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-restart {
+               compatible = "gpio-restart";
+               gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+               priority = <200>;
+       };
+
+       i2c-mux {
+               compatible = "i2c-mux";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               mux-controls = <&mux>;
+               i2c-parent = <&i2c4>;
+
+               i2c102: i2c-sfp@1 {
+                       reg = <1>;
+               };
+
+               i2c103: i2c-sfp@2 {
+                       reg = <2>;
+               };
+       };
+
+       mux: mux-controller {
+               compatible = "gpio-mux";
+               #mux-control-cells = <0>;
+
+               mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+                           <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+       };
+
+       sfp2: sfp2 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c102>;
+               tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+               los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
+               mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
+               tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp3: sfp3 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c103>;
+               tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+               los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
+               mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
+               tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&flx3 {
+       atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+       status = "okay";
+
+       usart3: serial@200 {
+               pinctrl-0 = <&fc3_b_pins>;
+               pinctrl-names = "default";
+               status = "okay";
+       };
+};
+
+&flx4 {
+       atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+       status = "okay";
+
+       i2c4: i2c@600 {
+               compatible = "microchip,sam9x60-i2c";
+               reg = <0x600 0x200>;
+               interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&nic_clk>;
+               pinctrl-0 = <&fc4_b_pins>;
+               pinctrl-names = "default";
+               i2c-analog-filter;
+               i2c-digital-filter;
+               i2c-digital-filter-width-ns = <35>;
+               i2c-sda-hold-time-ns = <1500>;
+               status = "okay";
+       };
+};
+
+&gpio {
+       fc3_b_pins: fc3-b-pins {
+               /* RXD, TXD */
+               pins = "GPIO_52", "GPIO_53";
+               function = "fc3_b";
+       };
+
+       fc4_b_pins: fc4-b-pins {
+               /* SCL, SDA */
+               pins = "GPIO_57", "GPIO_58";
+               function = "fc4_b";
+       };
+
+       sgpio_a_pins: sgpio-a-pins {
+               /* SCK, D0, D1, LD */
+               pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+               function = "sgpio_a";
+       };
+};
+
+&mdio1 {
+       status = "okay";
+};
+
+&phy0 {
+       status = "okay";
+};
+
+&phy1 {
+       status = "okay";
+};
+
+&port0 {
+       phy-handle = <&phy0>;
+       phy-mode = "gmii";
+       phys = <&serdes 0 CU(0)>;
+       status = "okay";
+};
+
+&port1 {
+       phy-handle = <&phy1>;
+       phy-mode = "gmii";
+       phys = <&serdes 1 CU(1)>;
+       status = "okay";
+};
+
+&port2 {
+       sfp = <&sfp2>;
+       managed = "in-band-status";
+       phy-mode = "sgmii";
+       phys = <&serdes 2 SERDES6G(0)>;
+       status = "okay";
+};
+
+&port3 {
+       sfp = <&sfp3>;
+       managed = "in-band-status";
+       phy-mode = "sgmii";
+       phys = <&serdes 3 SERDES6G(1)>;
+       status = "okay";
+};
+
+&serdes {
+       status = "okay";
+};
+
+&sgpio {
+       pinctrl-0 = <&sgpio_a_pins>;
+       pinctrl-names = "default";
+       microchip,sgpio-port-ranges = <0 3>, <8 11>;
+       status = "okay";
+
+       gpio@0 {
+               ngpios = <64>;
+       };
+       gpio@1 {
+               ngpios = <64>;
+       };
+};
+
+&switch {
+       status = "okay";
+};