Initial revision
authorwdenk <wdenk>
Wed, 2 Oct 2002 20:40:41 +0000 (20:40 +0000)
committerwdenk <wdenk>
Wed, 2 Oct 2002 20:40:41 +0000 (20:40 +0000)
cpu/mpc8xx/i2c.c [new file with mode: 0644]

diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
new file mode 100644 (file)
index 0000000..9d5d9d2
--- /dev/null
@@ -0,0 +1,737 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Back ported to the 8xx platform (from the 8260 platform) by
+ * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#include <commproc.h>
+#include <i2c.h>
+#ifdef CONFIG_LWMON
+#include <watchdog.h>
+#endif
+
+/* define to enable debug messages */
+#undef DEBUG_I2C
+
+/*-----------------------------------------------------------------------
+ * Set default values
+ */
+#ifndef        CFG_I2C_SPEED
+#define        CFG_I2C_SPEED   50000
+#endif
+
+#ifndef        CFG_I2C_SLAVE
+#define        CFG_I2C_SLAVE   0xFE
+#endif
+/*-----------------------------------------------------------------------
+ */
+
+/* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */
+#define TOUT_LOOP 1000000
+
+#define NUM_RX_BDS 4
+#define NUM_TX_BDS 4
+#define MAX_TX_SPACE 256
+#define I2C_RXTX_LEN 128       /* maximum tx/rx buffer length */
+
+typedef struct I2C_BD
+{
+  unsigned short status;
+  unsigned short length;
+  unsigned char *addr;
+} I2C_BD;
+#define BD_I2C_TX_START 0x0400  /* special status for i2c: Start condition */
+
+#define BD_I2C_TX_CL   0x0001  /* collision error */
+#define BD_I2C_TX_UN   0x0002  /* underflow error */
+#define BD_I2C_TX_NAK  0x0004  /* no acknowledge error */
+#define BD_I2C_TX_ERR  (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
+
+#define BD_I2C_RX_ERR  BD_SC_OV
+
+typedef void (*i2c_ecb_t)(int, int);   /* error callback function */
+
+/* This structure keeps track of the bd and buffer space usage. */
+typedef struct i2c_state {
+       int             rx_idx;         /* index   to next free Rx BD */
+       int             tx_idx;         /* index   to next free Tx BD */
+       void            *rxbd;          /* pointer to next free Rx BD */
+       void            *txbd;          /* pointer to next free Tx BD */
+       int             tx_space;       /* number  of Tx bytes left   */
+       unsigned char   *tx_buf;        /* pointer to free Tx area    */
+       i2c_ecb_t       err_cb;         /* error callback function    */
+} i2c_state_t;
+
+
+/* flags for i2c_send() and i2c_receive() */
+#define I2CF_ENABLE_SECONDARY  0x01    /* secondary_address is valid           */
+#define I2CF_START_COND                0x02    /* tx: generate start condition         */
+#define I2CF_STOP_COND         0x04    /* tx: generate stop  condition         */
+
+/* return codes */
+#define I2CERR_NO_BUFFERS      0x01    /* no more BDs or buffer space          */
+#define I2CERR_MSG_TOO_LONG    0x02    /* tried to send/receive to much data   */
+#define I2CERR_TIMEOUT         0x03    /* timeout in i2c_doio()                */
+#define I2CERR_QUEUE_EMPTY     0x04    /* i2c_doio called without send/receive */
+
+/* error callback flags */
+#define I2CECB_RX_ERR          0x10    /* this is a receive error              */
+#define     I2CECB_RX_ERR_OV   0x02    /* receive overrun error                */
+#define     I2CECB_RX_MASK     0x0f    /* mask for error bits                  */
+#define I2CECB_TX_ERR          0x20    /* this is a transmit error             */
+#define     I2CECB_TX_CL       0x01    /* transmit collision error             */
+#define     I2CECB_TX_UN       0x02    /* transmit underflow error             */
+#define     I2CECB_TX_NAK      0x04    /* transmit no ack error                */
+#define     I2CECB_TX_MASK     0x0f    /* mask for error bits                  */
+#define I2CECB_TIMEOUT         0x40    /* this is a timeout error              */
+
+#ifdef DEBUG_I2C
+#define PRINTD(x) printf x
+#else
+#define PRINTD(x)
+#endif
+
+/*
+ * Returns the best value of I2BRG to meet desired clock speed of I2C with
+ * input parameters (clock speed, filter, and predivider value).
+ * It returns computer speed value and the difference between it and desired
+ * speed.
+ */
+static inline int
+i2c_roundrate(int hz, int speed, int filter, int modval,
+               int *brgval, int *totspeed)
+{
+    int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
+
+    PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
+       hz, speed, filter, modval));
+
+    div = moddiv * speed;
+    brgdiv = (hz + div - 1) / div;
+
+    PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
+
+    *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
+
+    if ((*brgval < 0) || (*brgval > 255)) {
+         PRINTD(("\t\trejected brgval=%d\n", *brgval));
+         return -1;
+    }
+
+    brgdiv = 2 * (*brgval + 3 + (2 * filter));
+    div = moddiv * brgdiv ;
+    *totspeed = hz / div;
+
+    PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
+
+    return  0;
+}
+
+/*
+ * Sets the I2C clock predivider and divider to meet required clock speed.
+ */
+static int
+i2c_setrate (int hz, int speed)
+{
+       immap_t         *immap = (immap_t *) CFG_IMMR;
+       volatile i2c8xx_t *i2c = (i2c8xx_t *) & immap->im_i2c;
+       int             brgval,
+                       modval,         /* 0-3 */
+                       bestspeed_diff = speed,
+                       bestspeed_brgval = 0,
+                       bestspeed_modval = 0,
+                       bestspeed_filter = 0,
+                       totspeed,
+                       filter = 0;     /* Use this fixed value */
+
+       for (modval = 0; modval < 4; modval++) {
+               if (i2c_roundrate(hz,speed,filter,modval,&brgval,&totspeed) == 0) {
+                       int diff = speed - totspeed;
+
+                       if ((diff >= 0) && (diff < bestspeed_diff)) {
+                               bestspeed_diff = diff;
+                               bestspeed_modval = modval;
+                               bestspeed_brgval = brgval;
+                               bestspeed_filter = filter;
+                       }
+               }
+       }
+
+       PRINTD (("[I2C] Best is:\n"));
+       PRINTD (("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
+               hz,
+               speed,
+               bestspeed_filter,
+               bestspeed_modval,
+               bestspeed_brgval,
+               bestspeed_diff));
+
+       i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
+       i2c->i2c_i2brg = bestspeed_brgval & 0xff;
+
+       PRINTD (("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod,
+                        i2c->i2c_i2brg));
+
+       return 1;
+}
+
+void
+i2c_init(int speed, int slaveaddr)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+
+       volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+       volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
+       volatile i2c8xx_t *i2c  = (i2c8xx_t *)&immap->im_i2c;
+       volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+       ulong rbase, tbase;
+       volatile I2C_BD *rxbd, *txbd;
+       uint dpaddr;
+
+#ifdef CFG_I2C_UCODE_PATCH
+       iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#else
+       /* Disable relocation */
+       iip->iic_rpbase = 0;
+#endif
+
+#ifdef CFG_ALLOC_DPRAM
+       dpaddr = iip->iic_rbase;
+       if (dpaddr == 0) {
+           /* need to allocate dual port ram */
+           dpaddr = dpram_alloc_align(
+               (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
+               MAX_TX_SPACE, 8);
+       }
+#else
+       dpaddr = CPM_I2C_BASE;
+#endif
+
+       /*
+        * initialise data in dual port ram:
+        *
+        * dpaddr->rbase -> rx BD         (NUM_RX_BDS * sizeof(I2C_BD) bytes)
+        *         tbase -> tx BD         (NUM_TX_BDS * sizeof(I2C_BD) bytes)
+        *                  tx buffer     (MAX_TX_SPACE bytes)
+        */
+
+       rbase = dpaddr;
+       tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
+
+       /* Initialize Port B I2C pins. */
+       cp->cp_pbpar |= 0x00000030;
+       cp->cp_pbdir |= 0x00000030;
+       cp->cp_pbodr |= 0x00000030;
+
+       /* Disable interrupts */
+       i2c->i2c_i2mod = 0x00;
+       i2c->i2c_i2cmr = 0x00;
+       i2c->i2c_i2cer = 0xff;
+       i2c->i2c_i2add = slaveaddr;
+
+       /*
+        * Set the I2C BRG Clock division factor from desired i2c rate
+        * and current CPU rate (we assume sccr dfbgr field is 0;
+        * divide BRGCLK by 1)
+        */
+       PRINTD(("[I2C] Setting rate...\n"));
+       i2c_setrate (gd->cpu_clk, CFG_I2C_SPEED) ;
+
+       /* Set I2C controller in master mode */
+       i2c->i2c_i2com = 0x01;
+
+       /* Set SDMA bus arbitration level to 5 (SDCR) */
+       immap->im_siu_conf.sc_sdcr = 0x0001 ;
+
+       /* Initialize Tx/Rx parameters */
+       iip->iic_rbase = rbase;
+       iip->iic_tbase = tbase;
+       rxbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_rbase]);
+       txbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_tbase]);
+
+       PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
+       PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
+       PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
+       PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+       /* Set big endian byte order */
+       iip->iic_tfcr = 0x10;
+       iip->iic_rfcr = 0x10;
+
+       /* Set maximum receive size. */
+       iip->iic_mrblr = I2C_RXTX_LEN;
+
+#ifdef CFG_I2C_UCODE_PATCH
+       /*
+        *  Initialize required parameters if using microcode patch.
+        */
+       iip->iic_rbptr  = iip->iic_rbase;
+       iip->iic_tbptr  = iip->iic_tbase;
+       iip->iic_rstate = 0;
+       iip->iic_tstate = 0;
+#else
+       cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+       do {
+               __asm__ __volatile__ ("eieio");
+       } while (cp->cp_cpcr & CPM_CR_FLG);
+#endif
+
+       /* Clear events and interrupts */
+       i2c->i2c_i2cer = 0xff;
+       i2c->i2c_i2cmr = 0x00;
+}
+
+static void
+i2c_newio(i2c_state_t *state)
+{
+       volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+       volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
+       volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+
+       PRINTD(("[I2C] i2c_newio\n"));
+
+#ifdef CFG_I2C_UCODE_PATCH
+       iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#endif
+       state->rx_idx = 0;
+       state->tx_idx = 0;
+       state->rxbd = (void*)&cp->cp_dpmem[iip->iic_rbase];
+       state->txbd = (void*)&cp->cp_dpmem[iip->iic_tbase];
+       state->tx_space = MAX_TX_SPACE;
+       state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
+       state->err_cb = NULL;
+
+       PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
+       PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
+       PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
+
+       /* clear the buffer memory */
+       memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
+}
+
+static int
+i2c_send(i2c_state_t *state,
+        unsigned char address,
+        unsigned char secondary_address,
+        unsigned int flags,
+        unsigned short size,
+        unsigned char *dataout)
+{
+       volatile I2C_BD *txbd;
+       int i,j;
+
+       PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
+                       address, secondary_address, flags, size));
+
+       /* trying to send message larger than BD */
+       if (size > I2C_RXTX_LEN)
+         return I2CERR_MSG_TOO_LONG;
+
+       /* no more free bds */
+       if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
+         return I2CERR_NO_BUFFERS;
+
+       txbd = (I2C_BD *)state->txbd;
+       txbd->addr = state->tx_buf;
+
+       PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+       if (flags & I2CF_START_COND) {
+               PRINTD(("[I2C] Formatting addresses...\n"));
+               if (flags & I2CF_ENABLE_SECONDARY) {
+                       txbd->length = size + 2;  /* Length of msg + dest addr */
+                       txbd->addr[0] = address << 1;
+                       txbd->addr[1] = secondary_address;
+                       i = 2;
+               } else {
+                       txbd->length = size + 1;  /* Length of msg + dest addr */
+                       txbd->addr[0] = address << 1;  /* Write dest addr to BD */
+                       i = 1;
+               }
+       } else {
+               txbd->length = size;  /* Length of message */
+               i = 0;
+       }
+
+       /* set up txbd */
+       txbd->status = BD_SC_READY;
+       if (flags & I2CF_START_COND)
+         txbd->status |= BD_I2C_TX_START;
+       if (flags & I2CF_STOP_COND)
+         txbd->status |= BD_SC_LAST | BD_SC_WRAP;
+
+       /* Copy data to send into buffer */
+       PRINTD(("[I2C] copy data...\n"));
+       for(j = 0; j < size; i++, j++)
+         txbd->addr[i] = dataout[j];
+
+       PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+                  txbd->length,
+                  txbd->status,
+                  txbd->addr[0],
+                  txbd->addr[1]));
+
+       /* advance state */
+       state->tx_buf += txbd->length;
+       state->tx_space -= txbd->length;
+       state->tx_idx++;
+       state->txbd = (void*)(txbd + 1);
+
+       return 0;
+}
+
+static int
+i2c_receive(i2c_state_t *state,
+           unsigned char address,
+           unsigned char secondary_address,
+           unsigned int flags,
+           unsigned short size_to_expect,
+           unsigned char *datain)
+{
+       volatile I2C_BD *rxbd, *txbd;
+
+       PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
+
+       /* Expected to receive too much */
+       if (size_to_expect > I2C_RXTX_LEN)
+         return I2CERR_MSG_TOO_LONG;
+
+       /* no more free bds */
+       if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
+                || state->tx_space < 2)
+         return I2CERR_NO_BUFFERS;
+
+       rxbd = (I2C_BD *)state->rxbd;
+       txbd = (I2C_BD *)state->txbd;
+
+       PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
+       PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+
+       txbd->addr = state->tx_buf;
+
+       /* set up TXBD for destination address */
+       if (flags & I2CF_ENABLE_SECONDARY) {
+               txbd->length = 2;
+               txbd->addr[0] = address << 1;   /* Write data */
+               txbd->addr[1] = secondary_address;  /* Internal address */
+               txbd->status = BD_SC_READY;
+       } else {
+               txbd->length = 1 + size_to_expect;
+               txbd->addr[0] = (address << 1) | 0x01;
+               txbd->status = BD_SC_READY;
+               memset(&txbd->addr[1], 0, txbd->length);
+       }
+
+       /* set up rxbd for reception */
+       rxbd->status = BD_SC_EMPTY;
+       rxbd->length = size_to_expect;
+       rxbd->addr = datain;
+
+       txbd->status |= BD_I2C_TX_START;
+       if (flags & I2CF_STOP_COND) {
+               txbd->status |= BD_SC_LAST | BD_SC_WRAP;
+               rxbd->status |= BD_SC_WRAP;
+       }
+
+       PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+                  txbd->length,
+                  txbd->status,
+                  txbd->addr[0],
+                  txbd->addr[1]));
+       PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+                  rxbd->length,
+                  rxbd->status,
+                  rxbd->addr[0],
+                  rxbd->addr[1]));
+
+       /* advance state */
+       state->tx_buf += txbd->length;
+       state->tx_space -= txbd->length;
+       state->tx_idx++;
+       state->txbd = (void*)(txbd + 1);
+       state->rx_idx++;
+       state->rxbd = (void*)(rxbd + 1);
+
+       return 0;
+}
+
+
+static int i2c_doio(i2c_state_t *state)
+{
+       volatile immap_t *immap = (immap_t *)CFG_IMMR ;
+       volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
+       volatile i2c8xx_t *i2c  = (i2c8xx_t *)&immap->im_i2c;
+       volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
+       volatile I2C_BD *txbd, *rxbd;
+       volatile int j = 0;
+
+       PRINTD(("[I2C] i2c_doio\n"));
+
+#ifdef CFG_I2C_UCODE_PATCH
+       iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
+#endif
+
+       if (state->tx_idx <= 0 && state->rx_idx <= 0) {
+               PRINTD(("[I2C] No I/O is queued\n"));
+               return I2CERR_QUEUE_EMPTY;
+       }
+
+       iip->iic_rbptr = iip->iic_rbase;
+       iip->iic_tbptr = iip->iic_tbase;
+
+       /* Enable I2C */
+       PRINTD(("[I2C] Enabling I2C...\n"));
+       i2c->i2c_i2mod |= 0x01;
+
+       /* Begin transmission */
+       i2c->i2c_i2com |= 0x80;
+
+       /* Loop until transmit & receive completed */
+
+       if (state->tx_idx > 0) {
+               txbd = ((I2C_BD*)state->txbd) - 1;
+               PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
+               while((txbd->status & BD_SC_READY) && (j++ < TOUT_LOOP)) {
+                       if (ctrlc()) {
+                               return (-1);
+                       }
+                       __asm__ __volatile__ ("eieio");
+               }
+       }
+
+       if ((state->rx_idx > 0) && (j < TOUT_LOOP)) {
+               rxbd = ((I2C_BD*)state->rxbd) - 1;
+               PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
+               while((rxbd->status & BD_SC_EMPTY) && (j++ < TOUT_LOOP)) {
+                       if (ctrlc()) {
+                               return (-1);
+                       }
+                       __asm__ __volatile__ ("eieio");
+               }
+       }
+
+       /* Turn off I2C */
+       i2c->i2c_i2mod &= ~0x01;
+
+       if (state->err_cb != NULL) {
+               int n, i, b;
+
+               /*
+                * if we have an error callback function, look at the
+                * error bits in the bd status and pass them back
+                */
+
+               if ((n = state->tx_idx) > 0) {
+                       for (i = 0; i < n; i++) {
+                               txbd = ((I2C_BD*)state->txbd) - (n - i);
+                               if ((b = txbd->status & BD_I2C_TX_ERR) != 0)
+                                       (*state->err_cb)(I2CECB_TX_ERR|b, i);
+                       }
+               }
+
+               if ((n = state->rx_idx) > 0) {
+                       for (i = 0; i < n; i++) {
+                               rxbd = ((I2C_BD*)state->rxbd) - (n - i);
+                               if ((b = rxbd->status & BD_I2C_RX_ERR) != 0)
+                                       (*state->err_cb)(I2CECB_RX_ERR|b, i);
+                       }
+               }
+
+               if (j >= TOUT_LOOP)
+                       (*state->err_cb)(I2CECB_TIMEOUT, 0);
+       }
+
+       return (j >= TOUT_LOOP) ? I2CERR_TIMEOUT : 0;
+}
+
+static int had_tx_nak;
+
+static void
+i2c_test_callback(int flags, int xnum)
+{
+       if ((flags & I2CECB_TX_ERR) && (flags & I2CECB_TX_NAK))
+               had_tx_nak = 1;
+}
+
+int i2c_probe(uchar chip)
+{
+       i2c_state_t state;
+       int rc;
+       uchar buf[1];
+
+       i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+       i2c_newio(&state);
+
+       state.err_cb = i2c_test_callback;
+       had_tx_nak = 0;
+
+       rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
+
+       if (rc != 0)
+               return (rc);
+
+       rc = i2c_doio(&state);
+
+       if ((rc != 0) && (rc != I2CERR_TIMEOUT))
+               return (rc);
+
+       return (had_tx_nak);
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+
+       i2c_state_t state;
+       uchar xaddr[4];
+       int rc;
+
+#ifdef CONFIG_LWMON
+       WATCHDOG_RESET();
+#endif
+
+       xaddr[0] = (addr >> 24) & 0xFF;
+       xaddr[1] = (addr >> 16) & 0xFF;
+       xaddr[2] = (addr >>  8) & 0xFF;
+       xaddr[3] =  addr        & 0xFF;
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+       /*
+        * EEPROM chips that implement "address overflow" are ones like
+        * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
+        * extra bits end up in the "chip address" bit slots.  This makes
+        * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
+        *
+        * Note that we consider the length of the address field to still
+        * be one byte because the extra address bits are hidden in the
+        * chip address.
+        */
+        chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+       i2c_newio(&state);
+
+       rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
+       if (rc != 0) {
+               if (gd->have_console)
+                       printf("i2c_read: i2c_send failed (%d)\n", rc);
+               return 1;
+       }
+
+       rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
+       if (rc != 0) {
+               if (gd->have_console)
+                       printf("i2c_read: i2c_receive failed (%d)\n", rc);
+               return 1;
+       }
+
+       rc = i2c_doio(&state);
+       if (rc != 0) {
+               if (gd->have_console)
+                       printf("i2c_read: i2c_doio failed (%d)\n", rc);
+               return 1;
+       }
+       return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+       DECLARE_GLOBAL_DATA_PTR;
+
+       i2c_state_t state;
+       uchar xaddr[4];
+       int rc;
+
+       xaddr[0] = (addr >> 24) & 0xFF;
+       xaddr[1] = (addr >> 16) & 0xFF;
+       xaddr[2] = (addr >>  8) & 0xFF;
+       xaddr[3] =  addr        & 0xFF;
+
+#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+       /*
+        * EEPROM chips that implement "address overflow" are ones like
+        * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
+        * extra bits end up in the "chip address" bit slots.  This makes
+        * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
+        *
+        * Note that we consider the length of the address field to still
+        * be one byte because the extra address bits are hidden in the
+        * chip address.
+        */
+        chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+
+       i2c_newio(&state);
+
+       rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
+       if (rc != 0) {
+               if (gd->have_console)
+                       printf("i2c_write: first i2c_send failed (%d)\n", rc);
+               return 1;
+       }
+
+       rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
+       if (rc != 0) {
+               if (gd->have_console)
+                       printf("i2c_write: second i2c_send failed (%d)\n", rc);
+               return 1;
+       }
+
+       rc = i2c_doio(&state);
+       if (rc != 0) {
+               if (gd->have_console)
+                       printf("i2c_write: i2c_doio failed (%d)\n", rc);
+               return 1;
+       }
+       return 0;
+}
+
+uchar
+i2c_reg_read(uchar i2c_addr, uchar reg)
+{
+       char buf;
+
+       i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+       i2c_read(i2c_addr, reg, 1, &buf, 1);
+
+       return (buf);
+}
+
+void
+i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
+{
+       i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+       i2c_write(i2c_addr, reg, 1, &val, 1);
+}
+
+#endif /* CONFIG_HARD_I2C */