--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking VXLAN MDB functionality. The topology consists of
+# two sets of namespaces: One for the testing of IPv4 underlay and another for
+# IPv6. In both cases, both IPv4 and IPv6 overlay traffic are tested.
+#
+# Data path functionality is tested by sending traffic from one of the upper
+# namespaces and checking using ingress tc filters that the expected traffic
+# was received by one of the lower namespaces.
+#
+# +------------------------------------+ +------------------------------------+
+# | ns1_v4 | | ns1_v6 |
+# | | | |
+# | br0.10 br0.4000 br0.20 | | br0.10 br0.4000 br0.20 |
+# | + + + | | + + + |
+# | | | | | | | | | |
+# | | | | | | | | | |
+# | +---------+---------+ | | +---------+---------+ |
+# | | | | | |
+# | | | | | |
+# | + | | + |
+# | br0 | | br0 |
+# | + | | + |
+# | | | | | |
+# | | | | | |
+# | + | | + |
+# | vx0 | | vx0 |
+# | | | |
+# | | | |
+# | veth0 | | veth0 |
+# | + | | + |
+# +-----------------|------------------+ +-----------------|------------------+
+# | |
+# +-----------------|------------------+ +-----------------|------------------+
+# | + | | + |
+# | veth0 | | veth0 |
+# | | | |
+# | | | |
+# | vx0 | | vx0 |
+# | + | | + |
+# | | | | | |
+# | | | | | |
+# | + | | + |
+# | br0 | | br0 |
+# | + | | + |
+# | | | | | |
+# | | | | | |
+# | +---------+---------+ | | +---------+---------+ |
+# | | | | | | | | | |
+# | | | | | | | | | |
+# | + + + | | + + + |
+# | br0.10 br0.4000 br0.10 | | br0.10 br0.4000 br0.20 |
+# | | | |
+# | ns2_v4 | | ns2_v6 |
+# +------------------------------------+ +------------------------------------+
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+CONTROL_PATH_TESTS="
+ basic_star_g_ipv4_ipv4
+ basic_star_g_ipv6_ipv4
+ basic_star_g_ipv4_ipv6
+ basic_star_g_ipv6_ipv6
+ basic_sg_ipv4_ipv4
+ basic_sg_ipv6_ipv4
+ basic_sg_ipv4_ipv6
+ basic_sg_ipv6_ipv6
+ star_g_ipv4_ipv4
+ star_g_ipv6_ipv4
+ star_g_ipv4_ipv6
+ star_g_ipv6_ipv6
+ sg_ipv4_ipv4
+ sg_ipv6_ipv4
+ sg_ipv4_ipv6
+ sg_ipv6_ipv6
+ dump_ipv4_ipv4
+ dump_ipv6_ipv4
+ dump_ipv4_ipv6
+ dump_ipv6_ipv6
+"
+
+DATA_PATH_TESTS="
+ encap_params_ipv4_ipv4
+ encap_params_ipv6_ipv4
+ encap_params_ipv4_ipv6
+ encap_params_ipv6_ipv6
+ starg_exclude_ir_ipv4_ipv4
+ starg_exclude_ir_ipv6_ipv4
+ starg_exclude_ir_ipv4_ipv6
+ starg_exclude_ir_ipv6_ipv6
+ starg_include_ir_ipv4_ipv4
+ starg_include_ir_ipv6_ipv4
+ starg_include_ir_ipv4_ipv6
+ starg_include_ir_ipv6_ipv6
+ starg_exclude_p2mp_ipv4_ipv4
+ starg_exclude_p2mp_ipv6_ipv4
+ starg_exclude_p2mp_ipv4_ipv6
+ starg_exclude_p2mp_ipv6_ipv6
+ starg_include_p2mp_ipv4_ipv4
+ starg_include_p2mp_ipv6_ipv4
+ starg_include_p2mp_ipv4_ipv6
+ starg_include_p2mp_ipv6_ipv6
+ egress_vni_translation_ipv4_ipv4
+ egress_vni_translation_ipv6_ipv4
+ egress_vni_translation_ipv4_ipv6
+ egress_vni_translation_ipv6_ipv6
+ all_zeros_mdb_ipv4
+ all_zeros_mdb_ipv6
+ mdb_fdb_ipv4_ipv4
+ mdb_fdb_ipv6_ipv4
+ mdb_fdb_ipv4_ipv6
+ mdb_fdb_ipv6_ipv6
+ mdb_torture_ipv4_ipv4
+ mdb_torture_ipv6_ipv4
+ mdb_torture_ipv4_ipv6
+ mdb_torture_ipv6_ipv6
+"
+
+# All tests in this script. Can be overridden with -t option.
+TESTS="
+ $CONTROL_PATH_TESTS
+ $DATA_PATH_TESTS
+"
+VERBOSE=0
+PAUSE_ON_FAIL=no
+PAUSE=no
+
+################################################################################
+# Utilities
+
+log_test()
+{
+ local rc=$1
+ local expected=$2
+ local msg="$3"
+
+ if [ ${rc} -eq ${expected} ]; then
+ printf "TEST: %-60s [ OK ]\n" "${msg}"
+ nsuccess=$((nsuccess+1))
+ else
+ ret=1
+ nfail=$((nfail+1))
+ printf "TEST: %-60s [FAIL]\n" "${msg}"
+ if [ "$VERBOSE" = "1" ]; then
+ echo " rc=$rc, expected $expected"
+ fi
+
+ if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+ fi
+
+ if [ "${PAUSE}" = "yes" ]; then
+ echo
+ echo "hit enter to continue, 'q' to quit"
+ read a
+ [ "$a" = "q" ] && exit 1
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+}
+
+run_cmd()
+{
+ local cmd="$1"
+ local out
+ local stderr="2>/dev/null"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf "COMMAND: $cmd\n"
+ stderr=
+ fi
+
+ out=$(eval $cmd $stderr)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ return $rc
+}
+
+tc_check_packets()
+{
+ local ns=$1; shift
+ local id=$1; shift
+ local handle=$1; shift
+ local count=$1; shift
+ local pkts
+
+ sleep 0.1
+ pkts=$(tc -n $ns -j -s filter show $id \
+ | jq ".[] | select(.options.handle == $handle) | \
+ .options.actions[0].stats.packets")
+ [[ $pkts == $count ]]
+}
+
+################################################################################
+# Setup
+
+setup_common_ns()
+{
+ local ns=$1; shift
+ local local_addr=$1; shift
+
+ ip netns exec $ns sysctl -qw net.ipv4.ip_forward=1
+ ip netns exec $ns sysctl -qw net.ipv4.fib_multipath_use_neigh=1
+ ip netns exec $ns sysctl -qw net.ipv4.conf.default.ignore_routes_with_linkdown=1
+ ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+ ip netns exec $ns sysctl -qw net.ipv6.conf.all.forwarding=1
+ ip netns exec $ns sysctl -qw net.ipv6.conf.default.forwarding=1
+ ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
+ ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0
+ ip netns exec $ns sysctl -qw net.ipv6.conf.default.accept_dad=0
+
+ ip -n $ns link set dev lo up
+ ip -n $ns address add $local_addr dev lo
+
+ ip -n $ns link set dev veth0 up
+
+ ip -n $ns link add name br0 up type bridge vlan_filtering 1 \
+ vlan_default_pvid 0 mcast_snooping 0
+
+ ip -n $ns link add link br0 name br0.10 up type vlan id 10
+ bridge -n $ns vlan add vid 10 dev br0 self
+
+ ip -n $ns link add link br0 name br0.20 up type vlan id 20
+ bridge -n $ns vlan add vid 20 dev br0 self
+
+ ip -n $ns link add link br0 name br0.4000 up type vlan id 4000
+ bridge -n $ns vlan add vid 4000 dev br0 self
+
+ ip -n $ns link add name vx0 up master br0 type vxlan \
+ local $local_addr dstport 4789 external vnifilter
+ bridge -n $ns link set dev vx0 vlan_tunnel on
+
+ bridge -n $ns vlan add vid 10 dev vx0
+ bridge -n $ns vlan add vid 10 dev vx0 tunnel_info id 10010
+ bridge -n $ns vni add vni 10010 dev vx0
+
+ bridge -n $ns vlan add vid 20 dev vx0
+ bridge -n $ns vlan add vid 20 dev vx0 tunnel_info id 10020
+ bridge -n $ns vni add vni 10020 dev vx0
+
+ bridge -n $ns vlan add vid 4000 dev vx0 pvid
+ bridge -n $ns vlan add vid 4000 dev vx0 tunnel_info id 14000
+ bridge -n $ns vni add vni 14000 dev vx0
+}
+
+setup_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local local_addr1=$1; shift
+ local local_addr2=$1; shift
+
+ ip netns add $ns1
+ ip netns add $ns2
+
+ ip link add name veth0 type veth peer name veth1
+ ip link set dev veth0 netns $ns1 name veth0
+ ip link set dev veth1 netns $ns2 name veth0
+
+ setup_common_ns $ns1 $local_addr1
+ setup_common_ns $ns2 $local_addr2
+}
+
+setup_v4()
+{
+ setup_common ns1_v4 ns2_v4 192.0.2.1 192.0.2.2
+
+ ip -n ns1_v4 address add 192.0.2.17/28 dev veth0
+ ip -n ns2_v4 address add 192.0.2.18/28 dev veth0
+
+ ip -n ns1_v4 route add default via 192.0.2.18
+ ip -n ns2_v4 route add default via 192.0.2.17
+}
+
+cleanup_v4()
+{
+ ip netns del ns2_v4
+ ip netns del ns1_v4
+}
+
+setup_v6()
+{
+ setup_common ns1_v6 ns2_v6 2001:db8:1::1 2001:db8:1::2
+
+ ip -n ns1_v6 address add 2001:db8:2::1/64 dev veth0 nodad
+ ip -n ns2_v6 address add 2001:db8:2::2/64 dev veth0 nodad
+
+ ip -n ns1_v6 route add default via 2001:db8:2::2
+ ip -n ns2_v6 route add default via 2001:db8:2::1
+}
+
+cleanup_v6()
+{
+ ip netns del ns2_v6
+ ip netns del ns1_v6
+}
+
+setup()
+{
+ set -e
+
+ setup_v4
+ setup_v6
+
+ sleep 5
+
+ set +e
+}
+
+cleanup()
+{
+ cleanup_v6 &> /dev/null
+ cleanup_v4 &> /dev/null
+}
+
+################################################################################
+# Tests - Control path
+
+basic_common()
+{
+ local ns1=$1; shift
+ local grp_key=$1; shift
+ local vtep_ip=$1; shift
+
+ # Test basic control path operations common to all MDB entry types.
+
+ # Basic add, replace and delete behavior.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ log_test $? 0 "MDB entry addition"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\""
+ log_test $? 0 "MDB entry presence after addition"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ log_test $? 0 "MDB entry replacement"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\""
+ log_test $? 0 "MDB entry presence after replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
+ log_test $? 0 "MDB entry deletion"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\""
+ log_test $? 1 "MDB entry presence after deletion"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
+ log_test $? 255 "Non-existent MDB entry deletion"
+
+ # Default protocol and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"proto static\""
+ log_test $? 0 "MDB entry default protocol"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent proto 123 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"proto 123\""
+ log_test $? 0 "MDB entry protocol replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
+
+ # Default destination port and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \" dst_port \""
+ log_test $? 1 "MDB entry default destination port"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip dst_port 1234 src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"dst_port 1234\""
+ log_test $? 0 "MDB entry destination port replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
+
+ # Default destination VNI and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \" vni \""
+ log_test $? 1 "MDB entry default destination VNI"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip vni 1234 src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"vni 1234\""
+ log_test $? 0 "MDB entry destination VNI replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
+
+ # Default outgoing interface and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \" via \""
+ log_test $? 1 "MDB entry default outgoing interface"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010 via veth0"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep \"$grp_key\" | grep \"via veth0\""
+ log_test $? 0 "MDB entry outgoing interface replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
+
+ # Common error cases.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port veth0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ log_test $? 255 "MDB entry with mismatch between device and port"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key temp dst $vtep_ip src_vni 10010"
+ log_test $? 255 "MDB entry with temp state"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent vid 10 dst $vtep_ip src_vni 10010"
+ log_test $? 255 "MDB entry with VLAN"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp 01:02:03:04:05:06 permanent dst $vtep_ip src_vni 10010"
+ log_test $? 255 "MDB entry MAC address"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent"
+ log_test $? 255 "MDB entry without extended parameters"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent proto 3 dst $vtep_ip src_vni 10010"
+ log_test $? 255 "MDB entry with an invalid protocol"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip vni $((2 ** 24)) src_vni 10010"
+ log_test $? 255 "MDB entry with an invalid destination VNI"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni $((2 ** 24))"
+ log_test $? 255 "MDB entry with an invalid source VNI"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent src_vni 10010"
+ log_test $? 255 "MDB entry without a remote destination IP"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 $grp_key permanent dst $vtep_ip src_vni 10010"
+ log_test $? 255 "Duplicate MDB entries"
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 $grp_key dst $vtep_ip src_vni 10010"
+}
+
+basic_star_g_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local grp_key="grp 239.1.1.1"
+ local vtep_ip=198.51.100.100
+
+ echo
+ echo "Control path: Basic (*, G) operations - IPv4 overlay / IPv4 underlay"
+ echo "--------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+basic_star_g_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local grp_key="grp ff0e::1"
+ local vtep_ip=198.51.100.100
+
+ echo
+ echo "Control path: Basic (*, G) operations - IPv6 overlay / IPv4 underlay"
+ echo "--------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+basic_star_g_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local grp_key="grp 239.1.1.1"
+ local vtep_ip=2001:db8:1000::1
+
+ echo
+ echo "Control path: Basic (*, G) operations - IPv4 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+basic_star_g_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local grp_key="grp ff0e::1"
+ local vtep_ip=2001:db8:1000::1
+
+ echo
+ echo "Control path: Basic (*, G) operations - IPv6 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+basic_sg_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local grp_key="grp 239.1.1.1 src 192.0.2.129"
+ local vtep_ip=198.51.100.100
+
+ echo
+ echo "Control path: Basic (S, G) operations - IPv4 overlay / IPv4 underlay"
+ echo "--------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+basic_sg_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local grp_key="grp ff0e::1 src 2001:db8:100::1"
+ local vtep_ip=198.51.100.100
+
+ echo
+ echo "Control path: Basic (S, G) operations - IPv6 overlay / IPv4 underlay"
+ echo "---------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+basic_sg_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local grp_key="grp 239.1.1.1 src 192.0.2.129"
+ local vtep_ip=2001:db8:1000::1
+
+ echo
+ echo "Control path: Basic (S, G) operations - IPv4 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+basic_sg_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local grp_key="grp ff0e::1 src 2001:db8:100::1"
+ local vtep_ip=2001:db8:1000::1
+
+ echo
+ echo "Control path: Basic (S, G) operations - IPv6 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------------"
+
+ basic_common $ns1 "$grp_key" $vtep_ip
+}
+
+star_g_common()
+{
+ local ns1=$1; shift
+ local grp=$1; shift
+ local src1=$1; shift
+ local src2=$1; shift
+ local src3=$1; shift
+ local vtep_ip=$1; shift
+ local all_zeros_grp=$1; shift
+
+ # Test control path operations specific to (*, G) entries.
+
+ # Basic add, replace and delete behavior.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
+ log_test $? 0 "(*, G) MDB entry addition with source list"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \""
+ log_test $? 0 "(*, G) MDB entry presence after addition"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ log_test $? 0 "(S, G) MDB entry presence after addition"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
+ log_test $? 0 "(*, G) MDB entry replacement with source list"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \""
+ log_test $? 0 "(*, G) MDB entry presence after replacement"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ log_test $? 0 "(S, G) MDB entry presence after replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
+ log_test $? 0 "(*, G) MDB entry deletion"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \""
+ log_test $? 1 "(*, G) MDB entry presence after deletion"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ log_test $? 1 "(S, G) MDB entry presence after deletion"
+
+ # Default filter mode and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep exclude"
+ log_test $? 0 "(*, G) MDB entry default filter mode"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $src1 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep include"
+ log_test $? 0 "(*, G) MDB entry after replacing filter mode to \"include\""
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ log_test $? 0 "(S, G) MDB entry after replacing filter mode to \"include\""
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\" | grep blocked"
+ log_test $? 1 "\"blocked\" flag after replacing filter mode to \"include\""
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep exclude"
+ log_test $? 0 "(*, G) MDB entry after replacing filter mode to \"exclude\""
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ log_test $? 0 "(S, G) MDB entry after replacing filter mode to \"exclude\""
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\" | grep blocked"
+ log_test $? 0 "\"blocked\" flag after replacing filter mode to \"exclude\""
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
+
+ # Default source list and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep source_list"
+ log_test $? 1 "(*, G) MDB entry default source list"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1,$src2,$src3 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ log_test $? 0 "(S, G) MDB entry of 1st source after replacing source list"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src2\""
+ log_test $? 0 "(S, G) MDB entry of 2nd source after replacing source list"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src3\""
+ log_test $? 0 "(S, G) MDB entry of 3rd source after replacing source list"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1,$src3 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src1\""
+ log_test $? 0 "(S, G) MDB entry of 1st source after removing source"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src2\""
+ log_test $? 1 "(S, G) MDB entry of 2nd source after removing source"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \"src $src3\""
+ log_test $? 0 "(S, G) MDB entry of 3rd source after removing source"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
+
+ # Default protocol and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \"proto static\""
+ log_test $? 0 "(*, G) MDB entry default protocol"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \"proto static\""
+ log_test $? 0 "(S, G) MDB entry default protocol"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 proto bgp dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \"proto bgp\""
+ log_test $? 0 "(*, G) MDB entry protocol after replacement"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \"proto bgp\""
+ log_test $? 0 "(S, G) MDB entry protocol after replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
+
+ # Default destination port and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" dst_port \""
+ log_test $? 1 "(*, G) MDB entry default destination port"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" dst_port \""
+ log_test $? 1 "(S, G) MDB entry default destination port"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip dst_port 1234 src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" dst_port 1234 \""
+ log_test $? 0 "(*, G) MDB entry destination port after replacement"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" dst_port 1234 \""
+ log_test $? 0 "(S, G) MDB entry destination port after replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
+
+ # Default destination VNI and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" vni \""
+ log_test $? 1 "(*, G) MDB entry default destination VNI"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" vni \""
+ log_test $? 1 "(S, G) MDB entry default destination VNI"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip vni 1234 src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" vni 1234 \""
+ log_test $? 0 "(*, G) MDB entry destination VNI after replacement"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" vni 1234 \""
+ log_test $? 0 "(S, G) MDB entry destination VNI after replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
+
+ # Default outgoing interface and replacement.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" via \""
+ log_test $? 1 "(*, G) MDB entry default outgoing interface"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" via \""
+ log_test $? 1 "(S, G) MDB entry default outgoing interface"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $src1 dst $vtep_ip src_vni 10010 via veth0"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep -v \" src \" | grep \" via veth0 \""
+ log_test $? 0 "(*, G) MDB entry outgoing interface after replacement"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep \" src \" | grep \" via veth0 \""
+ log_test $? 0 "(S, G) MDB entry outgoing interface after replacement"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep_ip src_vni 10010"
+
+ # Error cases.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $all_zeros_grp permanent filter_mode exclude dst $vtep_ip src_vni 10010"
+ log_test $? 255 "All-zeros group with filter mode"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $all_zeros_grp permanent source_list $src1 dst $vtep_ip src_vni 10010"
+ log_test $? 255 "All-zeros group with source list"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode include dst $vtep_ip src_vni 10010"
+ log_test $? 255 "(*, G) INCLUDE with an empty source list"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $grp dst $vtep_ip src_vni 10010"
+ log_test $? 255 "Invalid source in source list"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp permanent source_list $src1 dst $vtep_ip src_vni 10010"
+ log_test $? 255 "Source list without filter mode"
+}
+
+star_g_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local grp=239.1.1.1
+ local src1=192.0.2.129
+ local src2=192.0.2.130
+ local src3=192.0.2.131
+ local vtep_ip=198.51.100.100
+ local all_zeros_grp=0.0.0.0
+
+ echo
+ echo "Control path: (*, G) operations - IPv4 overlay / IPv4 underlay"
+ echo "--------------------------------------------------------------"
+
+ star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
+}
+
+star_g_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local grp=ff0e::1
+ local src1=2001:db8:100::1
+ local src2=2001:db8:100::2
+ local src3=2001:db8:100::3
+ local vtep_ip=198.51.100.100
+ local all_zeros_grp=::
+
+ echo
+ echo "Control path: (*, G) operations - IPv6 overlay / IPv4 underlay"
+ echo "--------------------------------------------------------------"
+
+ star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
+}
+
+star_g_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local grp=239.1.1.1
+ local src1=192.0.2.129
+ local src2=192.0.2.130
+ local src3=192.0.2.131
+ local vtep_ip=2001:db8:1000::1
+ local all_zeros_grp=0.0.0.0
+
+ echo
+ echo "Control path: (*, G) operations - IPv4 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------"
+
+ star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
+}
+
+star_g_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local grp=ff0e::1
+ local src1=2001:db8:100::1
+ local src2=2001:db8:100::2
+ local src3=2001:db8:100::3
+ local vtep_ip=2001:db8:1000::1
+ local all_zeros_grp=::
+
+ echo
+ echo "Control path: (*, G) operations - IPv6 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------"
+
+ star_g_common $ns1 $grp $src1 $src2 $src3 $vtep_ip $all_zeros_grp
+}
+
+sg_common()
+{
+ local ns1=$1; shift
+ local grp=$1; shift
+ local src=$1; shift
+ local vtep_ip=$1; shift
+ local all_zeros_grp=$1; shift
+
+ # Test control path operations specific to (S, G) entries.
+
+ # Default filter mode.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $src permanent dst $vtep_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 -d -s mdb show dev vx0 | grep $grp | grep include"
+ log_test $? 0 "(S, G) MDB entry default filter mode"
+
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp src $src permanent dst $vtep_ip src_vni 10010"
+
+ # Error cases.
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $src permanent filter_mode include dst $vtep_ip src_vni 10010"
+ log_test $? 255 "(S, G) with filter mode"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $src permanent source_list $src dst $vtep_ip src_vni 10010"
+ log_test $? 255 "(S, G) with source list"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp src $grp permanent dst $vtep_ip src_vni 10010"
+ log_test $? 255 "(S, G) with an invalid source list"
+
+ run_cmd "bridge -n $ns1 mdb add dev vx0 port vx0 grp $all_zeros_grp src $src permanent dst $vtep_ip src_vni 10010"
+ log_test $? 255 "All-zeros group with source"
+}
+
+sg_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local grp=239.1.1.1
+ local src=192.0.2.129
+ local vtep_ip=198.51.100.100
+ local all_zeros_grp=0.0.0.0
+
+ echo
+ echo "Control path: (S, G) operations - IPv4 overlay / IPv4 underlay"
+ echo "--------------------------------------------------------------"
+
+ sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
+}
+
+sg_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+ local vtep_ip=198.51.100.100
+ local all_zeros_grp=::
+
+ echo
+ echo "Control path: (S, G) operations - IPv6 overlay / IPv4 underlay"
+ echo "--------------------------------------------------------------"
+
+ sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
+}
+
+sg_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local grp=239.1.1.1
+ local src=192.0.2.129
+ local vtep_ip=2001:db8:1000::1
+ local all_zeros_grp=0.0.0.0
+
+ echo
+ echo "Control path: (S, G) operations - IPv4 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------"
+
+ sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
+}
+
+sg_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+ local vtep_ip=2001:db8:1000::1
+ local all_zeros_grp=::
+
+ echo
+ echo "Control path: (S, G) operations - IPv6 overlay / IPv6 underlay"
+ echo "--------------------------------------------------------------"
+
+ sg_common $ns1 $grp $src $vtep_ip $all_zeros_grp
+}
+
+ipv4_grps_get()
+{
+ local max_grps=$1; shift
+ local i
+
+ for i in $(seq 0 $((max_grps - 1))); do
+ echo "239.1.1.$i"
+ done
+}
+
+ipv6_grps_get()
+{
+ local max_grps=$1; shift
+ local i
+
+ for i in $(seq 0 $((max_grps - 1))); do
+ echo "ff0e::$(printf %x $i)"
+ done
+}
+
+dump_common()
+{
+ local ns1=$1; shift
+ local local_addr=$1; shift
+ local remote_prefix=$1; shift
+ local fn=$1; shift
+ local max_vxlan_devs=2
+ local max_remotes=64
+ local max_grps=256
+ local num_entries
+ local batch_file
+ local grp
+ local i j
+
+ # The kernel maintains various markers for the MDB dump. Add a test for
+ # large scale MDB dump to make sure that all the configured entries are
+ # dumped and that the markers are used correctly.
+
+ # Create net devices.
+ for i in $(seq 1 $max_vxlan_devs); do
+ ip -n $ns1 link add name vx-test${i} up type vxlan \
+ local $local_addr dstport 4789 external vnifilter
+ done
+
+ # Create batch file with MDB entries.
+ batch_file=$(mktemp)
+ for i in $(seq 1 $max_vxlan_devs); do
+ for j in $(seq 1 $max_remotes); do
+ for grp in $($fn $max_grps); do
+ echo "mdb add dev vx-test${i} port vx-test${i} grp $grp permanent dst ${remote_prefix}${j}" >> $batch_file
+ done
+ done
+ done
+
+ # Program the batch file and check for expected number of entries.
+ bridge -n $ns1 -b $batch_file
+ for i in $(seq 1 $max_vxlan_devs); do
+ num_entries=$(bridge -n $ns1 mdb show dev vx-test${i} | grep "permanent" | wc -l)
+ [[ $num_entries -eq $((max_grps * max_remotes)) ]]
+ log_test $? 0 "Large scale dump - VXLAN device #$i"
+ done
+
+ rm -rf $batch_file
+}
+
+dump_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local local_addr=192.0.2.1
+ local remote_prefix=198.51.100.
+ local fn=ipv4_grps_get
+
+ echo
+ echo "Control path: Large scale MDB dump - IPv4 overlay / IPv4 underlay"
+ echo "-----------------------------------------------------------------"
+
+ dump_common $ns1 $local_addr $remote_prefix $fn
+}
+
+dump_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local local_addr=192.0.2.1
+ local remote_prefix=198.51.100.
+ local fn=ipv6_grps_get
+
+ echo
+ echo "Control path: Large scale MDB dump - IPv6 overlay / IPv4 underlay"
+ echo "-----------------------------------------------------------------"
+
+ dump_common $ns1 $local_addr $remote_prefix $fn
+}
+
+dump_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local local_addr=2001:db8:1::1
+ local remote_prefix=2001:db8:1000::
+ local fn=ipv4_grps_get
+
+ echo
+ echo "Control path: Large scale MDB dump - IPv4 overlay / IPv6 underlay"
+ echo "-----------------------------------------------------------------"
+
+ dump_common $ns1 $local_addr $remote_prefix $fn
+}
+
+dump_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local local_addr=2001:db8:1::1
+ local remote_prefix=2001:db8:1000::
+ local fn=ipv6_grps_get
+
+ echo
+ echo "Control path: Large scale MDB dump - IPv6 overlay / IPv6 underlay"
+ echo "-----------------------------------------------------------------"
+
+ dump_common $ns1 $local_addr $remote_prefix $fn
+}
+
+################################################################################
+# Tests - Data path
+
+encap_params_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local vtep1_ip=$1; shift
+ local vtep2_ip=$1; shift
+ local plen=$1; shift
+ local enc_ethtype=$1; shift
+ local grp=$1; shift
+ local src=$1; shift
+ local mz=$1; shift
+
+ # Test that packets forwarded by the VXLAN MDB are encapsulated with
+ # the correct parameters. Transmit packets from the first namespace and
+ # check that they hit the corresponding filters on the ingress of the
+ # second namespace.
+
+ run_cmd "tc -n $ns2 qdisc replace dev veth0 clsact"
+ run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
+ run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
+ run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"
+
+ # Check destination IP.
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep2_ip src_vni 10020"
+
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Destination IP - match"
+
+ run_cmd "ip netns exec $ns1 $mz br0.20 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Destination IP - no match"
+
+ run_cmd "tc -n $ns2 filter del dev vx0 ingress pref 1 handle 101 flower"
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep2_ip src_vni 10020"
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"
+
+ # Check destination port.
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip dst_port 1111 src_vni 10020"
+
+ run_cmd "tc -n $ns2 filter replace dev veth0 ingress pref 1 handle 101 proto $enc_ethtype flower ip_proto udp dst_port 4789 action pass"
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev veth0 ingress" 101 1
+ log_test $? 0 "Default destination port - match"
+
+ run_cmd "ip netns exec $ns1 $mz br0.20 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev veth0 ingress" 101 1
+ log_test $? 0 "Default destination port - no match"
+
+ run_cmd "tc -n $ns2 filter replace dev veth0 ingress pref 1 handle 101 proto $enc_ethtype flower ip_proto udp dst_port 1111 action pass"
+ run_cmd "ip netns exec $ns1 $mz br0.20 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev veth0 ingress" 101 1
+ log_test $? 0 "Non-default destination port - match"
+
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev veth0 ingress" 101 1
+ log_test $? 0 "Non-default destination port - no match"
+
+ run_cmd "tc -n $ns2 filter del dev veth0 ingress pref 1 handle 101 flower"
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10020"
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"
+
+ # Check default VNI.
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10020"
+
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_key_id 10010 action pass"
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Default destination VNI - match"
+
+ run_cmd "ip netns exec $ns1 $mz br0.20 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Default destination VNI - no match"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip vni 10020 src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip vni 10010 src_vni 10020"
+
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_key_id 10020 action pass"
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Non-default destination VNI - match"
+
+ run_cmd "ip netns exec $ns1 $mz br0.20 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Non-default destination VNI - no match"
+
+ run_cmd "tc -n $ns2 filter del dev vx0 ingress pref 1 handle 101 flower"
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10020"
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"
+}
+
+encap_params_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local enc_ethtype="ip"
+ local grp=239.1.1.1
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: Encapsulation parameters - IPv4 overlay / IPv4 underlay"
+ echo "------------------------------------------------------------------"
+
+ encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
+ $grp $src "mausezahn"
+}
+
+encap_params_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local enc_ethtype="ip"
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: Encapsulation parameters - IPv6 overlay / IPv4 underlay"
+ echo "------------------------------------------------------------------"
+
+ encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
+ $grp $src "mausezahn -6"
+}
+
+encap_params_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local enc_ethtype="ipv6"
+ local grp=239.1.1.1
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: Encapsulation parameters - IPv4 overlay / IPv6 underlay"
+ echo "------------------------------------------------------------------"
+
+ encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
+ $grp $src "mausezahn"
+}
+
+encap_params_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local enc_ethtype="ipv6"
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: Encapsulation parameters - IPv6 overlay / IPv6 underlay"
+ echo "------------------------------------------------------------------"
+
+ encap_params_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $enc_ethtype \
+ $grp $src "mausezahn -6"
+}
+
+starg_exclude_ir_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local vtep1_ip=$1; shift
+ local vtep2_ip=$1; shift
+ local plen=$1; shift
+ local grp=$1; shift
+ local valid_src=$1; shift
+ local invalid_src=$1; shift
+ local mz=$1; shift
+
+ # Install a (*, G) EXCLUDE MDB entry with one source and two remote
+ # VTEPs. Make sure that the source in the source list is not forwarded
+ # and that a source not in the list is forwarded. Remove one of the
+ # VTEPs from the entry and make sure that packets are only forwarded to
+ # the remaining VTEP.
+
+ run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
+ run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
+ run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"
+
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $invalid_src dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $invalid_src dst $vtep2_ip src_vni 10010"
+
+ # Check that invalid source is not forwarded to any VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 0
+ log_test $? 0 "Block excluded source - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 0
+ log_test $? 0 "Block excluded source - second VTEP"
+
+ # Check that valid source is forwarded to both VTEPs.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Forward valid source - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Forward valid source - second VTEP"
+
+ # Remove second VTEP.
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep2_ip src_vni 10010"
+
+ # Check that invalid source is not forwarded to any VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Block excluded source after removal - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Block excluded source after removal - second VTEP"
+
+ # Check that valid source is forwarded to the remaining VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 2
+ log_test $? 0 "Forward valid source after removal - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Forward valid source after removal - second VTEP"
+}
+
+starg_exclude_ir_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - IR - IPv4 overlay / IPv4 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_exclude_ir_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - IR - IPv6 overlay / IPv4 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+starg_exclude_ir_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - IR - IPv4 overlay / IPv6 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_exclude_ir_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - IR - IPv6 overlay / IPv6 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_exclude_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+starg_include_ir_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local vtep1_ip=$1; shift
+ local vtep2_ip=$1; shift
+ local plen=$1; shift
+ local grp=$1; shift
+ local valid_src=$1; shift
+ local invalid_src=$1; shift
+ local mz=$1; shift
+
+ # Install a (*, G) INCLUDE MDB entry with one source and two remote
+ # VTEPs. Make sure that the source in the source list is forwarded and
+ # that a source not in the list is not forwarded. Remove one of the
+ # VTEPs from the entry and make sure that packets are only forwarded to
+ # the remaining VTEP.
+
+ run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
+ run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
+ run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"
+
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $valid_src dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $valid_src dst $vtep2_ip src_vni 10010"
+
+ # Check that invalid source is not forwarded to any VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 0
+ log_test $? 0 "Block excluded source - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 0
+ log_test $? 0 "Block excluded source - second VTEP"
+
+ # Check that valid source is forwarded to both VTEPs.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Forward valid source - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Forward valid source - second VTEP"
+
+ # Remove second VTEP.
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep2_ip src_vni 10010"
+
+ # Check that invalid source is not forwarded to any VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Block excluded source after removal - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Block excluded source after removal - second VTEP"
+
+ # Check that valid source is forwarded to the remaining VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 2
+ log_test $? 0 "Forward valid source after removal - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Forward valid source after removal - second VTEP"
+}
+
+starg_include_ir_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) INCLUDE - IR - IPv4 overlay / IPv4 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_include_ir_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) INCLUDE - IR - IPv6 overlay / IPv4 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+starg_include_ir_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) INCLUDE - IR - IPv4 overlay / IPv6 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_include_ir_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) INCLUDE - IR - IPv6 overlay / IPv6 underlay"
+ echo "-------------------------------------------------------------"
+
+ starg_include_ir_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+starg_exclude_p2mp_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local mcast_grp=$1; shift
+ local plen=$1; shift
+ local grp=$1; shift
+ local valid_src=$1; shift
+ local invalid_src=$1; shift
+ local mz=$1; shift
+
+ # Install a (*, G) EXCLUDE MDB entry with one source and one multicast
+ # group to which packets are sent. Make sure that the source in the
+ # source list is not forwarded and that a source not in the list is
+ # forwarded.
+
+ run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
+ run_cmd "ip -n $ns2 address replace $mcast_grp/$plen dev veth0 autojoin"
+
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $mcast_grp action pass"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode exclude source_list $invalid_src dst $mcast_grp src_vni 10010 via veth0"
+
+ # Check that invalid source is not forwarded.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 0
+ log_test $? 0 "Block excluded source"
+
+ # Check that valid source is forwarded.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Forward valid source"
+
+ # Remove the VTEP from the multicast group.
+ run_cmd "ip -n $ns2 address del $mcast_grp/$plen dev veth0"
+
+ # Check that valid source is not received anymore.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Receive of valid source after removal from group"
+}
+
+starg_exclude_p2mp_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local mcast_grp=238.1.1.1
+ local plen=32
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - P2MP - IPv4 overlay / IPv4 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_exclude_p2mp_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local mcast_grp=238.1.1.1
+ local plen=32
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - P2MP - IPv6 overlay / IPv4 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+starg_exclude_p2mp_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local mcast_grp=ff0e::2
+ local plen=128
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - P2MP - IPv4 overlay / IPv6 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_exclude_p2mp_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local mcast_grp=ff0e::2
+ local plen=128
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) EXCLUDE - P2MP - IPv6 overlay / IPv6 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_exclude_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+starg_include_p2mp_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local mcast_grp=$1; shift
+ local plen=$1; shift
+ local grp=$1; shift
+ local valid_src=$1; shift
+ local invalid_src=$1; shift
+ local mz=$1; shift
+
+ # Install a (*, G) INCLUDE MDB entry with one source and one multicast
+ # group to which packets are sent. Make sure that the source in the
+ # source list is forwarded and that a source not in the list is not
+ # forwarded.
+
+ run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
+ run_cmd "ip -n $ns2 address replace $mcast_grp/$plen dev veth0 autojoin"
+
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $mcast_grp action pass"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent filter_mode include source_list $valid_src dst $mcast_grp src_vni 10010 via veth0"
+
+ # Check that invalid source is not forwarded.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $invalid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 0
+ log_test $? 0 "Block excluded source"
+
+ # Check that valid source is forwarded.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Forward valid source"
+
+ # Remove the VTEP from the multicast group.
+ run_cmd "ip -n $ns2 address del $mcast_grp/$plen dev veth0"
+
+ # Check that valid source is not received anymore.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $valid_src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Receive of valid source after removal from group"
+}
+
+starg_include_p2mp_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local mcast_grp=238.1.1.1
+ local plen=32
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) INCLUDE - P2MP - IPv4 overlay / IPv4 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_include_p2mp_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local mcast_grp=238.1.1.1
+ local plen=32
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) INCLUDE - P2MP - IPv6 overlay / IPv4 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+starg_include_p2mp_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local mcast_grp=ff0e::2
+ local plen=128
+ local grp=239.1.1.1
+ local valid_src=192.0.2.129
+ local invalid_src=192.0.2.145
+
+ echo
+ echo "Data path: (*, G) INCLUDE - P2MP - IPv4 overlay / IPv6 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn"
+}
+
+starg_include_p2mp_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local mcast_grp=ff0e::2
+ local plen=128
+ local grp=ff0e::1
+ local valid_src=2001:db8:100::1
+ local invalid_src=2001:db8:200::1
+
+ echo
+ echo "Data path: (*, G) INCLUDE - P2MP - IPv6 overlay / IPv6 underlay"
+ echo "---------------------------------------------------------------"
+
+ starg_include_p2mp_common $ns1 $ns2 $mcast_grp $plen $grp \
+ $valid_src $invalid_src "mausezahn -6"
+}
+
+egress_vni_translation_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local mcast_grp=$1; shift
+ local plen=$1; shift
+ local proto=$1; shift
+ local grp=$1; shift
+ local src=$1; shift
+ local mz=$1; shift
+
+ # When P2MP tunnels are used with optimized inter-subnet multicast
+ # (OISM) [1], the ingress VTEP does not perform VNI translation and
+ # uses the VNI of the source broadcast domain (BD). If the egress VTEP
+ # is a member in the source BD, then no VNI translation is needed.
+ # Otherwise, the egress VTEP needs to translate the VNI to the
+ # supplementary broadcast domain (SBD) VNI, which is usually the L3VNI.
+ #
+ # In this test, remove the VTEP in the second namespace from VLAN 10
+ # (VNI 10010) and make sure that a packet sent from this VLAN on the
+ # first VTEP is received by the SVI corresponding to the L3VNI (14000 /
+ # VLAN 4000) on the second VTEP.
+ #
+ # The second VTEP will be able to decapsulate the packet with VNI 10010
+ # because this VNI is configured on its shared VXLAN device. Later,
+ # when ingressing the bridge, the VNI to VLAN lookup will fail because
+ # the VTEP is not a member in VLAN 10, which will cause the packet to
+ # be tagged with VLAN 4000 since it is configured as PVID.
+ #
+ # [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast
+
+ run_cmd "tc -n $ns2 qdisc replace dev br0.4000 clsact"
+ run_cmd "ip -n $ns2 address replace $mcast_grp/$plen dev veth0 autojoin"
+ run_cmd "tc -n $ns2 filter replace dev br0.4000 ingress pref 1 handle 101 proto $proto flower src_ip $src dst_ip $grp action pass"
+
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp src $src permanent dst $mcast_grp src_vni 10010 via veth0"
+
+ # Remove the second VTEP from VLAN 10.
+ run_cmd "bridge -n $ns2 vlan del vid 10 dev vx0"
+
+ # Make sure that packets sent from the first VTEP over VLAN 10 are
+ # received by the SVI corresponding to the L3VNI (14000 / VLAN 4000) on
+ # the second VTEP, since it is configured as PVID.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev br0.4000 ingress" 101 1
+ log_test $? 0 "Egress VNI translation - PVID configured"
+
+ # Remove PVID flag from VLAN 4000 on the second VTEP and make sure
+ # packets are no longer received by the SVI interface.
+ run_cmd "bridge -n $ns2 vlan add vid 4000 dev vx0"
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev br0.4000 ingress" 101 1
+ log_test $? 0 "Egress VNI translation - no PVID configured"
+
+ # Reconfigure the PVID and make sure packets are received again.
+ run_cmd "bridge -n $ns2 vlan add vid 4000 dev vx0 pvid"
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev br0.4000 ingress" 101 2
+ log_test $? 0 "Egress VNI translation - PVID reconfigured"
+}
+
+egress_vni_translation_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local mcast_grp=238.1.1.1
+ local plen=32
+ local proto="ipv4"
+ local grp=239.1.1.1
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: Egress VNI translation - IPv4 overlay / IPv4 underlay"
+ echo "----------------------------------------------------------------"
+
+ egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
+ $src "mausezahn"
+}
+
+egress_vni_translation_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local mcast_grp=238.1.1.1
+ local plen=32
+ local proto="ipv6"
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: Egress VNI translation - IPv6 overlay / IPv4 underlay"
+ echo "----------------------------------------------------------------"
+
+ egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
+ $src "mausezahn -6"
+}
+
+egress_vni_translation_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local mcast_grp=ff0e::2
+ local plen=128
+ local proto="ipv4"
+ local grp=239.1.1.1
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: Egress VNI translation - IPv4 overlay / IPv6 underlay"
+ echo "----------------------------------------------------------------"
+
+ egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
+ $src "mausezahn"
+}
+
+egress_vni_translation_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local mcast_grp=ff0e::2
+ local plen=128
+ local proto="ipv6"
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: Egress VNI translation - IPv6 overlay / IPv6 underlay"
+ echo "----------------------------------------------------------------"
+
+ egress_vni_translation_common $ns1 $ns2 $mcast_grp $plen $proto $grp \
+ $src "mausezahn -6"
+}
+
+all_zeros_mdb_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local vtep1_ip=$1; shift
+ local vtep2_ip=$1; shift
+ local vtep3_ip=$1; shift
+ local vtep4_ip=$1; shift
+ local plen=$1; shift
+ local ipv4_grp=239.1.1.1
+ local ipv4_unreg_grp=239.2.2.2
+ local ipv4_ll_grp=224.0.0.100
+ local ipv4_src=192.0.2.129
+ local ipv6_grp=ff0e::1
+ local ipv6_unreg_grp=ff0e::2
+ local ipv6_ll_grp=ff02::1
+ local ipv6_src=2001:db8:100::1
+
+ # Install all-zeros (catchall) MDB entries for IPv4 and IPv6 traffic
+ # and make sure they only forward unregistered IP multicast traffic
+ # which is not link-local. Also make sure that each entry only forwards
+ # traffic from the matching address family.
+
+ # Associate two different VTEPs with one all-zeros MDB entry: Two with
+ # the IPv4 entry (0.0.0.0) and another two with the IPv6 one (::).
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp 0.0.0.0 permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp 0.0.0.0 permanent dst $vtep2_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp :: permanent dst $vtep3_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp :: permanent dst $vtep4_ip src_vni 10010"
+
+ # Associate one VTEP from each set with a regular MDB entry: One with
+ # an IPv4 entry and another with an IPv6 one.
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $ipv4_grp permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $ipv6_grp permanent dst $vtep3_ip src_vni 10010"
+
+ # Add filters to match on decapsulated traffic in the second namespace.
+ run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 103 proto all flower enc_dst_ip $vtep3_ip action pass"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 104 proto all flower enc_dst_ip $vtep4_ip action pass"
+
+ # Configure the VTEP addresses in the second namespace to enable
+ # decapsulation.
+ run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
+ run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"
+ run_cmd "ip -n $ns2 address replace $vtep3_ip/$plen dev lo"
+ run_cmd "ip -n $ns2 address replace $vtep4_ip/$plen dev lo"
+
+ # Send registered IPv4 multicast and make sure it only arrives to the
+ # first VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn br0.10 -A $ipv4_src -B $ipv4_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Registered IPv4 multicast - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 0
+ log_test $? 0 "Registered IPv4 multicast - second VTEP"
+
+ # Send unregistered IPv4 multicast that is not link-local and make sure
+ # it arrives to the first and second VTEPs.
+ run_cmd "ip netns exec $ns1 mausezahn br0.10 -A $ipv4_src -B $ipv4_unreg_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 2
+ log_test $? 0 "Unregistered IPv4 multicast - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Unregistered IPv4 multicast - second VTEP"
+
+ # Send IPv4 link-local multicast traffic and make sure it does not
+ # arrive to any VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn br0.10 -A $ipv4_src -B $ipv4_ll_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 2
+ log_test $? 0 "Link-local IPv4 multicast - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Link-local IPv4 multicast - second VTEP"
+
+ # Send registered IPv4 multicast using a unicast MAC address and make
+ # sure it does not arrive to any VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn br0.10 -a own -b 00:11:22:33:44:55 -A $ipv4_src -B $ipv4_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 2
+ log_test $? 0 "Registered IPv4 multicast with a unicast MAC - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Registered IPv4 multicast with a unicast MAC - second VTEP"
+
+ # Send registered IPv4 multicast using a broadcast MAC address and make
+ # sure it does not arrive to any VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn br0.10 -a own -b bcast -A $ipv4_src -B $ipv4_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 2
+ log_test $? 0 "Registered IPv4 multicast with a broadcast MAC - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Registered IPv4 multicast with a broadcast MAC - second VTEP"
+
+ # Make sure IPv4 traffic did not reach the VTEPs associated with
+ # IPv6 entries.
+ tc_check_packets "$ns2" "dev vx0 ingress" 103 0
+ log_test $? 0 "IPv4 traffic - third VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 104 0
+ log_test $? 0 "IPv4 traffic - fourth VTEP"
+
+ # Reset IPv4 filters before testing IPv6 traffic.
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto all flower enc_dst_ip $vtep1_ip action pass"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto all flower enc_dst_ip $vtep2_ip action pass"
+
+ # Send registered IPv6 multicast and make sure it only arrives to the
+ # third VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -A $ipv6_src -B $ipv6_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 103 1
+ log_test $? 0 "Registered IPv6 multicast - third VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 104 0
+ log_test $? 0 "Registered IPv6 multicast - fourth VTEP"
+
+ # Send unregistered IPv6 multicast that is not link-local and make sure
+ # it arrives to the third and fourth VTEPs.
+ run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -A $ipv6_src -B $ipv6_unreg_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 103 2
+ log_test $? 0 "Unregistered IPv6 multicast - third VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 104 1
+ log_test $? 0 "Unregistered IPv6 multicast - fourth VTEP"
+
+ # Send IPv6 link-local multicast traffic and make sure it does not
+ # arrive to any VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -A $ipv6_src -B $ipv6_ll_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 103 2
+ log_test $? 0 "Link-local IPv6 multicast - third VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 104 1
+ log_test $? 0 "Link-local IPv6 multicast - fourth VTEP"
+
+ # Send registered IPv6 multicast using a unicast MAC address and make
+ # sure it does not arrive to any VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -a own -b 00:11:22:33:44:55 -A $ipv6_src -B $ipv6_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 103 2
+ log_test $? 0 "Registered IPv6 multicast with a unicast MAC - third VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 104 1
+ log_test $? 0 "Registered IPv6 multicast with a unicast MAC - fourth VTEP"
+
+ # Send registered IPv6 multicast using a broadcast MAC address and make
+ # sure it does not arrive to any VTEP.
+ run_cmd "ip netns exec $ns1 mausezahn -6 br0.10 -a own -b bcast -A $ipv6_src -B $ipv6_grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 103 2
+ log_test $? 0 "Registered IPv6 multicast with a broadcast MAC - third VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 104 1
+ log_test $? 0 "Registered IPv6 multicast with a broadcast MAC - fourth VTEP"
+
+ # Make sure IPv6 traffic did not reach the VTEPs associated with
+ # IPv4 entries.
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 0
+ log_test $? 0 "IPv6 traffic - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 0
+ log_test $? 0 "IPv6 traffic - second VTEP"
+}
+
+all_zeros_mdb_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.101
+ local vtep2_ip=198.51.100.102
+ local vtep3_ip=198.51.100.103
+ local vtep4_ip=198.51.100.104
+ local plen=32
+
+ echo
+ echo "Data path: All-zeros MDB entry - IPv4 underlay"
+ echo "----------------------------------------------"
+
+ all_zeros_mdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $vtep3_ip \
+ $vtep4_ip $plen
+}
+
+all_zeros_mdb_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local vtep3_ip=2001:db8:3000::1
+ local vtep4_ip=2001:db8:4000::1
+ local plen=128
+
+ echo
+ echo "Data path: All-zeros MDB entry - IPv6 underlay"
+ echo "----------------------------------------------"
+
+ all_zeros_mdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $vtep3_ip \
+ $vtep4_ip $plen
+}
+
+mdb_fdb_common()
+{
+ local ns1=$1; shift
+ local ns2=$1; shift
+ local vtep1_ip=$1; shift
+ local vtep2_ip=$1; shift
+ local plen=$1; shift
+ local proto=$1; shift
+ local grp=$1; shift
+ local src=$1; shift
+ local mz=$1; shift
+
+ # Install an MDB entry and an FDB entry and make sure that the FDB
+ # entry only forwards traffic that was not forwarded by the MDB.
+
+ # Associate the MDB entry with one VTEP and the FDB entry with another
+ # VTEP.
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 fdb add 00:00:00:00:00:00 dev vx0 self static dst $vtep2_ip src_vni 10010"
+
+ # Add filters to match on decapsulated traffic in the second namespace.
+ run_cmd "tc -n $ns2 qdisc replace dev vx0 clsact"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 101 proto $proto flower ip_proto udp dst_port 54321 enc_dst_ip $vtep1_ip action pass"
+ run_cmd "tc -n $ns2 filter replace dev vx0 ingress pref 1 handle 102 proto $proto flower ip_proto udp dst_port 54321 enc_dst_ip $vtep2_ip action pass"
+
+ # Configure the VTEP addresses in the second namespace to enable
+ # decapsulation.
+ run_cmd "ip -n $ns2 address replace $vtep1_ip/$plen dev lo"
+ run_cmd "ip -n $ns2 address replace $vtep2_ip/$plen dev lo"
+
+ # Send IP multicast traffic and make sure it is forwarded by the MDB
+ # and only arrives to the first VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "IP multicast - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 0
+ log_test $? 0 "IP multicast - second VTEP"
+
+ # Send broadcast traffic and make sure it is forwarded by the FDB and
+ # only arrives to the second VTEP.
+ run_cmd "ip netns exec $ns1 $mz br0.10 -a own -b bcast -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "Broadcast - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 1
+ log_test $? 0 "Broadcast - second VTEP"
+
+ # Remove the MDB entry and make sure that IP multicast is now forwarded
+ # by the FDB to the second VTEP.
+ run_cmd "bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp dst $vtep1_ip src_vni 10010"
+ run_cmd "ip netns exec $ns1 $mz br0.10 -A $src -B $grp -t udp sp=12345,dp=54321 -p 100 -c 1 -q"
+ tc_check_packets "$ns2" "dev vx0 ingress" 101 1
+ log_test $? 0 "IP multicast after removal - first VTEP"
+ tc_check_packets "$ns2" "dev vx0 ingress" 102 2
+ log_test $? 0 "IP multicast after removal - second VTEP"
+}
+
+mdb_fdb_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local proto="ipv4"
+ local grp=239.1.1.1
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: MDB with FDB - IPv4 overlay / IPv4 underlay"
+ echo "------------------------------------------------------"
+
+ mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp $src \
+ "mausezahn"
+}
+
+mdb_fdb_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local ns2=ns2_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local plen=32
+ local proto="ipv6"
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: MDB with FDB - IPv6 overlay / IPv4 underlay"
+ echo "------------------------------------------------------"
+
+ mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp $src \
+ "mausezahn -6"
+}
+
+mdb_fdb_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local proto="ipv4"
+ local grp=239.1.1.1
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: MDB with FDB - IPv4 overlay / IPv6 underlay"
+ echo "------------------------------------------------------"
+
+ mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp $src \
+ "mausezahn"
+}
+
+mdb_fdb_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local ns2=ns2_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local plen=128
+ local proto="ipv6"
+ local grp=ff0e::1
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: MDB with FDB - IPv6 overlay / IPv6 underlay"
+ echo "------------------------------------------------------"
+
+ mdb_fdb_common $ns1 $ns2 $vtep1_ip $vtep2_ip $plen $proto $grp $src \
+ "mausezahn -6"
+}
+
+mdb_grp1_loop()
+{
+ local ns1=$1; shift
+ local vtep1_ip=$1; shift
+ local grp1=$1; shift
+
+ while true; do
+ bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp1 dst $vtep1_ip src_vni 10010
+ bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp1 permanent dst $vtep1_ip src_vni 10010
+ done >/dev/null 2>&1
+}
+
+mdb_grp2_loop()
+{
+ local ns1=$1; shift
+ local vtep1_ip=$1; shift
+ local vtep2_ip=$1; shift
+ local grp2=$1; shift
+
+ while true; do
+ bridge -n $ns1 mdb del dev vx0 port vx0 grp $grp2 dst $vtep1_ip src_vni 10010
+ bridge -n $ns1 mdb add dev vx0 port vx0 grp $grp2 permanent dst $vtep1_ip src_vni 10010
+ bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp2 permanent dst $vtep2_ip src_vni 10010
+ done >/dev/null 2>&1
+}
+
+mdb_torture_common()
+{
+ local ns1=$1; shift
+ local vtep1_ip=$1; shift
+ local vtep2_ip=$1; shift
+ local grp1=$1; shift
+ local grp2=$1; shift
+ local src=$1; shift
+ local mz=$1; shift
+ local pid1
+ local pid2
+ local pid3
+ local pid4
+
+ # Continuously send two streams that are forwarded by two different MDB
+ # entries. The first entry will be added and deleted in a loop. This
+ # allows us to test that the data path does not use freed MDB entry
+ # memory. The second entry will have two remotes, one that is added and
+ # deleted in a loop and another that is replaced in a loop. This allows
+ # us to test that the data path does not use freed remote entry memory.
+ # The test is considered successful if nothing crashed.
+
+ # Create the MDB entries that will be continuously deleted / replaced.
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp1 permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp2 permanent dst $vtep1_ip src_vni 10010"
+ run_cmd "bridge -n $ns1 mdb replace dev vx0 port vx0 grp $grp2 permanent dst $vtep2_ip src_vni 10010"
+
+ mdb_grp1_loop $ns1 $vtep1_ip $grp1 &
+ pid1=$!
+ mdb_grp2_loop $ns1 $vtep1_ip $vtep2_ip $grp2 &
+ pid2=$!
+ ip netns exec $ns1 $mz br0.10 -A $src -B $grp1 -t udp sp=12345,dp=54321 -p 100 -c 0 -q &
+ pid3=$!
+ ip netns exec $ns1 $mz br0.10 -A $src -B $grp2 -t udp sp=12345,dp=54321 -p 100 -c 0 -q &
+ pid4=$!
+
+ sleep 30
+ kill -9 $pid1 $pid2 $pid3 $pid4
+ wait $pid1 $pid2 $pid3 $pid4 2>/dev/null
+
+ log_test 0 0 "Torture test"
+}
+
+mdb_torture_ipv4_ipv4()
+{
+ local ns1=ns1_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local grp1=239.1.1.1
+ local grp2=239.2.2.2
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: MDB torture test - IPv4 overlay / IPv4 underlay"
+ echo "----------------------------------------------------------"
+
+ mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp2 $src \
+ "mausezahn"
+}
+
+mdb_torture_ipv6_ipv4()
+{
+ local ns1=ns1_v4
+ local vtep1_ip=198.51.100.100
+ local vtep2_ip=198.51.100.200
+ local grp1=ff0e::1
+ local grp2=ff0e::2
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: MDB torture test - IPv6 overlay / IPv4 underlay"
+ echo "----------------------------------------------------------"
+
+ mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp2 $src \
+ "mausezahn -6"
+}
+
+mdb_torture_ipv4_ipv6()
+{
+ local ns1=ns1_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local grp1=239.1.1.1
+ local grp2=239.2.2.2
+ local src=192.0.2.129
+
+ echo
+ echo "Data path: MDB torture test - IPv4 overlay / IPv6 underlay"
+ echo "----------------------------------------------------------"
+
+ mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp2 $src \
+ "mausezahn"
+}
+
+mdb_torture_ipv6_ipv6()
+{
+ local ns1=ns1_v6
+ local vtep1_ip=2001:db8:1000::1
+ local vtep2_ip=2001:db8:2000::1
+ local grp1=ff0e::1
+ local grp2=ff0e::2
+ local src=2001:db8:100::1
+
+ echo
+ echo "Data path: MDB torture test - IPv6 overlay / IPv6 underlay"
+ echo "----------------------------------------------------------"
+
+ mdb_torture_common $ns1 $vtep1_ip $vtep2_ip $grp1 $grp2 $src \
+ "mausezahn -6"
+}
+
+################################################################################
+# Usage
+
+usage()
+{
+ cat <<EOF
+usage: ${0##*/} OPTS
+
+ -t <test> Test(s) to run (default: all)
+ (options: $TESTS)
+ -c Control path tests only
+ -d Data path tests only
+ -p Pause on fail
+ -P Pause after each test before cleanup
+ -v Verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# Main
+
+trap cleanup EXIT
+
+while getopts ":t:cdpPvh" opt; do
+ case $opt in
+ t) TESTS=$OPTARG;;
+ c) TESTS=${CONTROL_PATH_TESTS};;
+ d) TESTS=${DATA_PATH_TESTS};;
+ p) PAUSE_ON_FAIL=yes;;
+ P) PAUSE=yes;;
+ v) VERBOSE=$(($VERBOSE + 1));;
+ h) usage; exit 0;;
+ *) usage; exit 1;;
+ esac
+done
+
+# Make sure we don't pause twice.
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+ echo "SKIP: Need root privileges"
+ exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v bridge)" ]; then
+ echo "SKIP: Could not run test without bridge tool"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v mausezahn)" ]; then
+ echo "SKIP: Could not run test without mausezahn tool"
+ exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v jq)" ]; then
+ echo "SKIP: Could not run test without jq tool"
+ exit $ksft_skip
+fi
+
+bridge mdb help 2>&1 | grep -q "src_vni"
+if [ $? -ne 0 ]; then
+ echo "SKIP: iproute2 bridge too old, missing VXLAN MDB support"
+ exit $ksft_skip
+fi
+
+# Start clean.
+cleanup
+
+for t in $TESTS
+do
+ setup; $t; cleanup;
+done
+
+if [ "$TESTS" != "none" ]; then
+ printf "\nTests passed: %3d\n" ${nsuccess}
+ printf "Tests failed: %3d\n" ${nfail}
+fi
+
+exit $ret
projects / platform / kernel / linux-starfive.git / commitdiff