[ Upstream commit
31b62a98de42cf65d76e4dcfb571af067d27d83a ]
When reading pinconf-pins from debugfs it fails to get the configured pull
type on RK3568, "unsupported pinctrl type" error messages is also reported.
Fix this by adding support for RK3568 in rockchip_get_pull, including a
reverse of the pull-up value swap applied in rockchip_set_pull so that
pull-up is correctly reported in pinconf-pins.
Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
Fixes:
c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
case RK3308:
case RK3368:
case RK3399:
+ case RK3568:
pull_type = bank->pull_type[pin_num / 8];
data >>= bit;
data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1;
+ /*
+ * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6,
+ * where that pull up value becomes 3.
+ */
+ if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
+ if (data == 3)
+ data = 1;
+ }
return rockchip_pull_list[pull_type][data];
default:
}
}
/*
- * In the TRM, pull-up being 1 for everything except the GPIO0_D0-D6,
+ * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6,
* where that pull up value becomes 3.
*/
if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {