/*
* Based on shasum from http://www.netsw.org/crypto/hash/
- *
- * shasum fixed with reference to coreutils and the nist fip180-1 document
- * which is incorrect, in section 5
- * - ft(B,C,D) = (B AND C) OR ((NOT B) AND D) ( 0 <= t <= 19)
- * + ft(B,C,D) = (D XOR (B AND (C XOR D))) ( 0 <= t <= 19)
+ * Majorly hacked up to use Dr Brian Gladman's sha1 code
*
* Copyright (C) 1999 Scott G. Miller
* Copyright (C) 2003 Glenn L. McGrath
+ * Copyright (C) 2003 Erik Andersen
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
+#include <limits.h>
+#include <stdint.h>
#include <endian.h>
+#include <byteswap.h>
#include "busybox.h"
+
+/*
+ ---------------------------------------------------------------------------
+ Begin Dr. Gladman's sha1 code
+ ---------------------------------------------------------------------------
+*/
+
+/*
+ ---------------------------------------------------------------------------
+ Copyright (c) 2002, Dr Brian Gladman <brg@gladman.me.uk>, Worcester, UK.
+ All rights reserved.
+
+ LICENSE TERMS
+
+ The free distribution and use of this software in both source and binary
+ form is allowed (with or without changes) provided that:
+
+ 1. distributions of this source code include the above copyright
+ notice, this list of conditions and the following disclaimer;
+
+ 2. distributions in binary form include the above copyright
+ notice, this list of conditions and the following disclaimer
+ in the documentation and/or other associated materials;
+
+ 3. the copyright holder's name is not used to endorse products
+ built using this software without specific written permission.
+
+ ALTERNATIVELY, provided that this notice is retained in full, this product
+ may be distributed under the terms of the GNU General Public License (GPL),
+ in which case the provisions of the GPL apply INSTEAD OF those given above.
+
+ DISCLAIMER
+
+ This software is provided 'as is' with no explicit or implied warranties
+ in respect of its properties, including, but not limited to, correctness
+ and/or fitness for purpose.
+ ---------------------------------------------------------------------------
+ Issue Date: 10/11/2002
+
+ This is a byte oriented version of SHA1 that operates on arrays of bytes
+ stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor
+*/
+
+#define SHA1_BLOCK_SIZE 64
+#define SHA1_DIGEST_SIZE 20
+#define SHA1_HASH_SIZE SHA1_DIGEST_SIZE
+#define SHA2_GOOD 0
+#define SHA2_BAD 1
+
+/* type to hold the SHA1 context */
+typedef struct
+{ uint32_t count[2];
+ uint32_t hash[5];
+ uint32_t wbuf[16];
+} sha1_ctx;
+
+#define rotl32(x,n) (((x) << n) | ((x) >> (32 - n)))
+
#if __BYTE_ORDER == __BIG_ENDIAN
-# define SWAP(n) (n)
+# define swap_b32(x) (x)
+#elif defined(bswap_32)
+# define swap_b32(x) bswap_32(x)
#else
-# define SWAP(n) \
- (((n) << 24) | (((n) & 0xff00) << 8) | (((n) >> 8) & 0xff00) | ((n) >> 24))
+# define swap_b32(x) ((rotl32((x), 8) & 0x00ff00ff) | (rotl32((x), 24) & 0xff00ff00))
#endif
-#define f1(X,Y,Z) (Z ^ (X & (Y ^ Z)))
-#define f2(X,Y,Z) (X ^ Y ^ Z)
-#define f3(X,Y,Z) ((X & Y) | (Z & (X | Y)))
+#define SHA1_MASK (SHA1_BLOCK_SIZE - 1)
-#define rol1(x) (x<<1) | ((x>>31) & 1)
-#define rol5(x) ((x<<5) | ((x>>27) & 0x1f))
-#define rol30(x) (x<<30) | ((x>>2) & 0x3fffffff)
+/* reverse byte order in 32-bit words */
+#define ch(x,y,z) (((x) & (y)) ^ (~(x) & (z)))
+#define parity(x,y,z) ((x) ^ (y) ^ (z))
+#define maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
-static void sha_hash(unsigned int *data, int *hash)
+/* A normal version as set out in the FIPS. This version uses */
+/* partial loop unrolling and is optimised for the Pentium 4 */
+#define rnd(f,k) \
+ t = a; a = rotl32(a,5) + f(b,c,d) + e + k + w[i]; \
+ e = d; d = c; c = rotl32(b, 30); b = t
+
+void sha1_compile(sha1_ctx ctx[1])
{
- RESERVE_CONFIG_BUFFER(word, 80 * sizeof(unsigned int));
- int *W = (unsigned int *) &word;
- int a = hash[0];
- int b = hash[1];
- int c = hash[2];
- int d = hash[3];
- int e = hash[4];
- int t;
- int TEMP;
-
- for (t = 0; t < 16; t++) {
- W[t] = SWAP(data[t]);
- }
+ uint32_t w[80], i, a, b, c, d, e, t;
+
+ /* note that words are compiled from the buffer into 32-bit */
+ /* words in big-endian order so an order reversal is needed */
+ /* here on little endian machines */
+ for(i = 0; i < SHA1_BLOCK_SIZE / 4; ++i)
+ w[i] = swap_b32(ctx->wbuf[i]);
+
+ for(i = SHA1_BLOCK_SIZE / 4; i < 80; ++i)
+ w[i] = rotl32(w[i - 3] ^ w[i - 8] ^ w[i - 14] ^ w[i - 16], 1);
+
+ a = ctx->hash[0];
+ b = ctx->hash[1];
+ c = ctx->hash[2];
+ d = ctx->hash[3];
+ e = ctx->hash[4];
+
+ for(i = 0; i < 20; ++i)
+ {
+ rnd(ch, 0x5a827999);
+ }
+
+ for(i = 20; i < 40; ++i)
+ {
+ rnd(parity, 0x6ed9eba1);
+ }
+
+ for(i = 40; i < 60; ++i)
+ {
+ rnd(maj, 0x8f1bbcdc);
+ }
+
+ for(i = 60; i < 80; ++i)
+ {
+ rnd(parity, 0xca62c1d6);
+ }
+
+ ctx->hash[0] += a;
+ ctx->hash[1] += b;
+ ctx->hash[2] += c;
+ ctx->hash[3] += d;
+ ctx->hash[4] += e;
+}
- /** Data expansion from 16 to 80 blocks **/
- for (t = 16; t < 80; t++) {
- int x = W[t - 3] ^ W[t - 8] ^ W[t - 14] ^ W[t - 16];
- W[t] = rol1(x);
- }
+void sha1_begin(sha1_ctx ctx[1])
+{
+ ctx->count[0] = ctx->count[1] = 0;
+ ctx->hash[0] = 0x67452301;
+ ctx->hash[1] = 0xefcdab89;
+ ctx->hash[2] = 0x98badcfe;
+ ctx->hash[3] = 0x10325476;
+ ctx->hash[4] = 0xc3d2e1f0;
+}
- /** Main loops **/
- for (t = 0; t < 20; t++) {
- TEMP = rol5(a) + f1(b, c, d) + e + W[t] + 0x5a827999;
- e = d;
- d = c;
- c = rol30(b);
- b = a;
- a = TEMP;
- }
- for (; t < 40; t++) {
- TEMP = rol5(a) + f2(b, c, d) + e + W[t] + 0x6ed9eba1;
- e = d;
- d = c;
- c = rol30(b);
- b = a;
- a = TEMP;
- }
- for (; t < 60; t++) {
- TEMP = rol5(a) + f3(b, c, d) + e + W[t] + 0x8f1bbcdc;
- e = d;
- d = c;
- c = rol30(b);
- b = a;
- a = TEMP;
- }
- for (; t < 80; t++) {
- TEMP = rol5(a) + f2(b, c, d) + e + W[t] + 0xca62c1d6;
- e = d;
- d = c;
- c = rol30(b);
- b = a;
- a = TEMP;
- }
+/* SHA1 hash data in an array of bytes into hash buffer and call the */
+/* hash_compile function as required. */
+void sha1_hash(const unsigned char data[], unsigned int len, sha1_ctx ctx[1])
+{
+ uint32_t pos = (uint32_t)(ctx->count[0] & SHA1_MASK),
+ freeb = SHA1_BLOCK_SIZE - pos;
+ const unsigned char *sp = data;
+
+ if((ctx->count[0] += len) < len)
+ ++(ctx->count[1]);
- RELEASE_CONFIG_BUFFER(word);
+ while(len >= freeb) /* tranfer whole blocks while possible */
+ {
+ memcpy(((unsigned char*)ctx->wbuf) + pos, sp, freeb);
+ sp += freeb; len -= freeb; freeb = SHA1_BLOCK_SIZE; pos = 0;
+ sha1_compile(ctx);
+ }
- hash[0] += a;
- hash[1] += b;
- hash[2] += c;
- hash[3] += d;
- hash[4] += e;
+ memcpy(((unsigned char*)ctx->wbuf) + pos, sp, len);
}
-static char sha1sum_stream(FILE *fd, unsigned int *hashval)
+/* SHA1 Final padding and digest calculation */
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+static uint32_t mask[4] =
+ { 0x00000000, 0x000000ff, 0x0000ffff, 0x00ffffff };
+static uint32_t bits[4] =
+ { 0x00000080, 0x00008000, 0x00800000, 0x80000000 };
+#else
+static uint32_t mask[4] =
+ { 0x00000000, 0xff000000, 0xffff0000, 0xffffff00 };
+static uint32_t bits[4] =
+ { 0x80000000, 0x00800000, 0x00008000, 0x00000080 };
+#endif
+
+void sha1_end(unsigned char hval[], sha1_ctx ctx[1])
{
- RESERVE_CONFIG_BUFFER(buffer, 64);
- int length = 0;
-
- hashval[0] = 0x67452301;
- hashval[1] = 0xefcdab89;
- hashval[2] = 0x98badcfe;
- hashval[3] = 0x10325476;
- hashval[4] = 0xc3d2e1f0;
-
- while (!feof(fd) && !ferror(fd)) {
- int c = fread(&buffer, 1, 64, fd);
- length += c;
- if (feof(fd) || ferror(fd)) {
- int i;
- for (i = c; i < 61; i++) {
- if (i == c) {
- buffer[i] = 0x80;
- }
- else if (i == 60) {
- /* This ends up being swaped twice */
- ((unsigned int *) &buffer)[15] = SWAP(length * 8);
- } else {
- buffer[i] = 0;
- }
- }
+ uint32_t i, cnt = (uint32_t)(ctx->count[0] & SHA1_MASK);
+
+ /* mask out the rest of any partial 32-bit word and then set */
+ /* the next byte to 0x80. On big-endian machines any bytes in */
+ /* the buffer will be at the top end of 32 bit words, on little */
+ /* endian machines they will be at the bottom. Hence the AND */
+ /* and OR masks above are reversed for little endian systems */
+ ctx->wbuf[cnt >> 2] = (ctx->wbuf[cnt >> 2] & mask[cnt & 3]) | bits[cnt & 3];
+
+ /* we need 9 or more empty positions, one for the padding byte */
+ /* (above) and eight for the length count. If there is not */
+ /* enough space pad and empty the buffer */
+ if(cnt > SHA1_BLOCK_SIZE - 9)
+ {
+ if(cnt < 60) ctx->wbuf[15] = 0;
+ sha1_compile(ctx);
+ cnt = 0;
+ }
+ else /* compute a word index for the empty buffer positions */
+ cnt = (cnt >> 2) + 1;
+
+ while(cnt < 14) /* and zero pad all but last two positions */
+ ctx->wbuf[cnt++] = 0;
+
+ /* assemble the eight byte counter in the buffer in big-endian */
+ /* format */
+
+ ctx->wbuf[14] = swap_b32((ctx->count[1] << 3) | (ctx->count[0] >> 29));
+ ctx->wbuf[15] = swap_b32(ctx->count[0] << 3);
+
+ sha1_compile(ctx);
+
+ /* extract the hash value as bytes in case the hash buffer is */
+ /* misaligned for 32-bit words */
+
+ for(i = 0; i < SHA1_DIGEST_SIZE; ++i)
+ hval[i] = (unsigned char)(ctx->hash[i >> 2] >> 8 * (~i & 3));
+}
+
+#if 0
+void sha1(unsigned char hval[], const unsigned char data[], unsigned int len)
+{ sha1_ctx cx[1];
+
+ sha1_begin(cx); sha1_hash(data, len, cx); sha1_end(hval, cx);
+}
+#endif
+
+/*
+ ---------------------------------------------------------------------------
+ End of Dr. Gladman's sha1 code
+ ---------------------------------------------------------------------------
+*/
+
+/* Using a larger blocksize can make things _much_ faster
+ * by avoiding a zillion tiny little reads */
+#define BLOCKSIZE 65536
+/* Ensure that BLOCKSIZE is a multiple of 64. */
+#if BLOCKSIZE % SHA1_BLOCK_SIZE != 0
+# error "BLOCKSIZE not a multiple of 64"
+#endif
+
+static int sha1sum_stream(FILE *stream, unsigned char *hashval)
+{
+ int result = 0;
+ sha1_ctx cx[1];
+ size_t sum, n;
+ RESERVE_CONFIG_BUFFER(buffer, BLOCKSIZE + 72);
+
+ /* Initialize the computation context. */
+ sha1_begin(cx);
+
+ /* Iterate over full file contents. */
+ while (1)
+ {
+ /* We read the file in blocks of BLOCKSIZE bytes. One call of the
+ computation function processes the whole buffer so that with the
+ next round of the loop another block can be read. */
+ sum = 0;
+
+ /* Read block. Take care for partial reads. */
+ while (1)
+ {
+ n = fread (buffer + sum, 1, BLOCKSIZE - sum, stream);
+ sum += n;
+
+ if (sum == BLOCKSIZE)
+ break;
+
+ if (n == 0) {
+ /* Check for the error flag IFF N == 0, so that we don't
+ exit the loop after a partial read due to e.g., EAGAIN
+ or EWOULDBLOCK. */
+ if (feof (stream)) {
+ sum = 0;
+ goto process_partial_block;
+ }
+ if (ferror (stream)) {
+ result++;
+ goto all_done;
}
- sha_hash((unsigned int *) &buffer, hashval);
+ goto process_partial_block;
+ }
+
+ /* We've read at least one byte, so ignore errors. But always
+ check for EOF, since feof may be true even though N > 0.
+ Otherwise, we could end up calling fread after EOF. */
+ if (feof (stream))
+ goto process_partial_block;
}
- RELEASE_CONFIG_BUFFER(buffer);
+ /* Process buffer */
+ sha1_hash(buffer, BLOCKSIZE, cx);
+ }
+
+process_partial_block:
+
+ /* Process any remaining bytes. */
+ if (sum > 0)
+ sha1_hash(buffer, sum, cx);
+
+ /* Finalize and write the hash into our buffer. */
+ sha1_end(hashval, cx);
+
+all_done:
- return(EXIT_SUCCESS);
+ RELEASE_CONFIG_BUFFER(buffer);
+ return result;
}
#define FLAG_SILENT 1
#define FLAG_CHECK 2
#define FLAG_WARN 4
-static unsigned char *hash_bin_to_hex(unsigned int *hash_value, unsigned char hash_length)
+static unsigned char *hash_bin_to_hex(unsigned char *hash_value, unsigned char hash_length)
{
- unsigned char x;
+ int x, len, max;
unsigned char *hex_value;
- hex_value = xmalloc(hash_length * 8);
- for (x = 0; x < hash_length; x++) {
- sprintf(&hex_value[x * 8], "%08x", hash_value[x]);
+ max = (hash_length * 2) + 2;
+ hex_value = xmalloc(max);
+ for (x = len = 0; x < hash_length; x++) {
+ len += snprintf(hex_value+len, max-len, "%02x", hash_value[x]);
}
return(hex_value);
}
}
/* This could become a common function for md5 as well, by using md5_stream */
-extern int authenticate(int argc, char **argv, char (*hash_ptr)(FILE *stream, unsigned int *hashval), const unsigned char hash_length)
+extern int authenticate(int argc, char **argv,
+ int (*hash_ptr)(FILE *stream, unsigned char *hashval),
+ const unsigned char hash_length)
{
- unsigned int hash_value[hash_length];
+ unsigned char hash_value[hash_length];
unsigned int flags;
int return_value = EXIT_SUCCESS;
line_ptr++;
stream = bb_wfopen(line_ptr, "r");
if (hash_ptr(stream, hash_value) == EXIT_FAILURE) {
+ bb_perror_msg("%s", file_ptr);
return_value = EXIT_FAILURE;
}
if (fclose(stream) == EOF) {
continue;
}
if (hash_ptr(stream, hash_value) == EXIT_FAILURE) {
+ bb_perror_msg("%s", file_ptr);
return_value = EXIT_FAILURE;
}
else if (!flags & FLAG_SILENT) {
extern int sha1sum_main(int argc, char **argv)
{
- return (authenticate(argc, argv, sha1sum_stream, 5));
+ return (authenticate(argc, argv, sha1sum_stream, SHA1_HASH_SIZE));
}
projects / platform / upstream / busybox.git / commitdiff