Blackfin: convert boards to use platform data with smc91x

Latest smc91x driver allows you to specify settings in board resources
rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 85f9ac5..cb360e9 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -275,6 +275,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -293,6 +301,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index b843d0e..617a287 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -292,6 +292,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -310,6 +318,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 38cf8ff..1bd8b61 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -88,6 +88,14 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 9ecdc36..8208d67 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -48,6 +48,14 @@ static struct platform_device rtc_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -66,6 +74,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 1443e92..7052568 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -195,6 +195,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .start = 0x20200300,
@@ -211,6 +219,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 4e3e511..88b2dfc 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -67,6 +67,14 @@ static struct platform_device bfin_fb_adv7393_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -84,6 +92,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 7a7b656..f3dc283 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -63,6 +63,14 @@ static struct platform_device rtc_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -81,6 +89,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 2a87d1c..3681d2c 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -223,6 +223,14 @@ static struct platform_device hitachi_fb_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .start = 0x20200300,
@@ -240,6 +248,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 838240f..3bbe102 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -92,6 +92,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 192e34e..313249e 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -171,6 +171,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -189,6 +197,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index e523e6e..97a86b4 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -223,6 +223,14 @@ static struct platform_device hitachi_fb_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .start = 0x20200300,
@@ -240,6 +248,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 57695b4..42297fa 100644 (file)
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -177,6 +177,14 @@ static struct platform_device bfin_sir2_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -194,6 +202,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 0c9d72c..ebb0755 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -213,6 +213,13 @@ static struct platform_device hitachi_fb_device = {
 
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
 
 static struct resource smc91x_resources[] = {
        {
@@ -231,6 +238,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 

diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 4df904f..10edc99 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -147,6 +147,14 @@ static struct platform_device net2272_bfin_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -166,6 +174,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif