#define TWL4030_BCIICHG 0x08
#define TWL4030_BCIVAC 0x0a
#define TWL4030_BCIVBUS 0x0c
+#define TWL4030_BCIMFSTS3 0x0F
#define TWL4030_BCIMFSTS4 0x10
#define TWL4030_BCICTL1 0x23
#define TWL4030_BB_CFG 0x12
+#define TWL4030_BCIMFSTS1 0x01
+
#define TWL4030_BCIAUTOWEN BIT(5)
#define TWL4030_CONFIG_DONE BIT(4)
#define TWL4030_BCIAUTOUSB BIT(1)
#define TWL4030_BBISEL_500uA 0x02
#define TWL4030_BBISEL_1000uA 0x03
+#define TWL4030_BATSTSPCHG BIT(2)
+#define TWL4030_BATSTSMCHG BIT(6)
+
/* BCI interrupts */
#define TWL4030_WOVF BIT(0) /* Watchdog overflow */
#define TWL4030_TMOVF BIT(1) /* Timer overflow */
}
/*
+ * Check if Battery Pack was present
+ */
+static int twl4030_is_battery_present(struct twl4030_bci *bci)
+{
+ int ret;
+ u8 val = 0;
+
+ /* Battery presence in Main charge? */
+ ret = twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, &val, TWL4030_BCIMFSTS3);
+ if (ret)
+ return ret;
+ if (val & TWL4030_BATSTSMCHG)
+ return 0;
+
+ /*
+ * OK, It could be that bootloader did not enable main charger,
+ * pre-charge is h/w auto. So, Battery presence in Pre-charge?
+ */
+ ret = twl_i2c_read_u8(TWL4030_MODULE_PRECHARGE, &val,
+ TWL4030_BCIMFSTS1);
+ if (ret)
+ return ret;
+ if (val & TWL4030_BATSTSPCHG)
+ return 0;
+
+ return -ENODEV;
+}
+
+/*
* Check if VBUS power is present
*/
static int twl4030_bci_have_vbus(struct twl4030_bci *bci)
bci->irq_chg = platform_get_irq(pdev, 0);
bci->irq_bci = platform_get_irq(pdev, 1);
- platform_set_drvdata(pdev, bci);
+ /* Only proceed further *IF* battery is physically present */
+ ret = twl4030_is_battery_present(bci);
+ if (ret) {
+ dev_crit(&pdev->dev, "Battery was not detected:%d\n", ret);
+ goto fail_no_battery;
+ }
+ platform_set_drvdata(pdev, bci);
bci->ac.name = "twl4030_ac";
bci->ac.type = POWER_SUPPLY_TYPE_MAINS;
bci->ac.properties = twl4030_charger_props;
fail_register_usb:
power_supply_unregister(&bci->ac);
fail_register_ac:
+fail_no_battery:
kfree(bci);
return ret;