powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.

dcbz, dcbf, dcbi, dcbst and icbi do not set DAR when they
cause a DTLB Error. Dectect this by tagging DAR with 0x00f0
at every exception exit that modifies DAR.
Test for DAR=0x00f0 in DataTLBError and bail
to handle_page_fault().

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 97bd523..a9f1ace 100644 (file)
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -206,6 +206,8 @@ MachineCheck:
        EXCEPTION_PROLOG
        mfspr r4,SPRN_DAR
        stw r4,_DAR(r11)
+       li r5,0x00f0
+       mtspr SPRN_DAR,r5       /* Tag DAR, to be used in DTLB Error */
        mfspr r5,SPRN_DSISR
        stw r5,_DSISR(r11)
        addi r3,r1,STACK_FRAME_OVERHEAD
@@ -222,6 +224,8 @@ DataAccess:
        stw     r10,_DSISR(r11)
        mr      r5,r10
        mfspr   r4,SPRN_DAR
+       li      r10,0x00f0
+       mtspr   SPRN_DAR,r10    /* Tag DAR, to be used in DTLB Error */
        EXC_XFER_EE_LITE(0x300, handle_page_fault)
 
 /* Instruction access exception.
@@ -244,6 +248,8 @@ Alignment:
        EXCEPTION_PROLOG
        mfspr   r4,SPRN_DAR
        stw     r4,_DAR(r11)
+       li      r5,0x00f0
+       mtspr   SPRN_DAR,r5     /* Tag DAR, to be used in DTLB Error */
        mfspr   r5,SPRN_DSISR
        stw     r5,_DSISR(r11)
        addi    r3,r1,STACK_FRAME_OVERHEAD
@@ -445,6 +451,7 @@ DataStoreTLBMiss:
         * of the MMU.
         */
 2:     li      r11, 0x00f0
+       mtspr   SPRN_DAR,r11    /* Tag DAR */
        rlwimi  r10, r11, 0, 24, 28     /* Set 24-27, clear 28 */
        DO_8xx_CPU6(0x3d80, r3)
        mtspr   SPRN_MD_RPN, r10        /* Update TLB entry */
@@ -485,6 +492,10 @@ DataTLBError:
        stw     r10, 0(r0)
        stw     r11, 4(r0)
 
+       mfspr   r10, SPRN_DAR
+       cmpwi   cr0, r10, 0x00f0
+       beq-    2f      /* must be a buggy dcbX, icbi insn. */
+
        mfspr   r11, SPRN_DSISR
        andis.  r11, r11, 0x4800        /* !translation or protection */
        bne     2f      /* branch if either is set */
@@ -508,7 +519,8 @@ DataTLBError:
         * are initialized in mapin_ram().  This will avoid the problem,
         * assuming we only use the dcbi instruction on kernel addresses.
         */
-       mfspr   r10, SPRN_DAR
+
+       /* DAR is in r10 already */
        rlwinm  r11, r10, 0, 0, 19
        ori     r11, r11, MD_EVALID
        mfspr   r10, SPRN_M_CASID
@@ -550,6 +562,7 @@ DataTLBError:
         * of the MMU.
         */
        li      r11, 0x00f0
+       mtspr   SPRN_DAR,r11    /* Tag DAR */
        rlwimi  r10, r11, 0, 24, 28     /* Set 24-27, clear 28 */
        DO_8xx_CPU6(0x3d80, r3)
        mtspr   SPRN_MD_RPN, r10        /* Update TLB entry */