Changes since U-Boot 1.1.4:
======================================================================
+* Update omap5912osk board support
+ - Fix OMAP support that omap5912osk compiles in current source tree
+ - Update with code from "http://omap.spectrumdigital.com/osk5912"
+ to fix problems with DDR initialization
+ - Fix timer setup
+ - Use CFI flash driver and support complete 32MB of onboard flash
+ - Add "print_cpuinfo()" and "checkboard()" functions to display
+ CPU (with frequency) and Board infos
+ Patch by Stefan Roese, 10 May 2006
+
* Fix watchdog issues for ColdFire boards.
* Add M5271EVB board support.
.globl lowlevel_init
lowlevel_init:
+ /*------------------------------------------------------*
+ * Ensure i-cache is enabled *
+ * To configure TC regs without fetching instruction *
+ *------------------------------------------------------*/
+ mrc p15, 0, r0, c1, c0
+ orr r0, r0, #0x1000
+ mcr p15, 0, r0, c1, c0
/*------------------------------------------------------*
*mask all IRQs by setting all bits in the INTMR default*
str r1, [r0]
/*------------------------------------------------------*
- * Set up ARM CLM registers (IDLECT2) *
+ * Set up ARM CLM registers (IDLECT2) *
*------------------------------------------------------*/
ldr r0, REG_ARM_IDLECT2
ldr r1, VAL_ARM_IDLECT2
str r1, [r0]
/*------------------------------------------------------*
- * Set up ARM CLM registers (IDLECT3) *
+ * Set up ARM CLM registers (IDLECT3) *
*------------------------------------------------------*/
ldr r0, REG_ARM_IDLECT3
ldr r1, VAL_ARM_IDLECT3
str r1, [r0]
-
- mov r1, #0x01 /* PER_EN bit */
+ mov r1, #0x01 /* PER_EN bit */
ldr r0, REG_ARM_RSTCT2
- strh r1, [r0] /* CLKM; Peripheral reset. */
+ strh r1, [r0] /* CLKM; Peripheral reset. */
- /* Set CLKM to Sync-Scalable */
- /* I supposedly need to enable the dsp clock before switching */
- mov r1, #0x0000
+ /* Set CLKM to Sync-Scalable */
+ mov r1, #0x1000
ldr r0, REG_ARM_SYSST
- strh r1, [r0]
- mov r0, #0x400
-1:
- subs r0, r0, #0x1 /* wait for any bubbles to finish */
+
+ mov r2, #0
+1: cmp r2, #1
+ streqh r1, [r0]
+ add r2, r2, #1
+ cmp r2, #0x100 /* wait for any bubbles to finish */
bne 1b
+
ldr r1, VAL_ARM_CKCTL
ldr r0, REG_ARM_CKCTL
strh r1, [r0]
ldr r1, VAL_DPLL1_CTL
ldr r0, REG_DPLL1_CTL
strh r1, [r0]
- ands r1, r1, #0x10 /* Check if PLL is enabled. */
- beq lock_end /* Do not look for lock if BYPASS selected */
+ ands r1, r1, #0x10 /* Check if PLL is enabled. */
+ beq lock_end /* Do not look for lock if BYPASS selected */
2:
ldrh r1, [r0]
- ands r1, r1, #0x01 /* Check the LOCK bit.*/
- beq 2b /* loop until bit goes hi. */
+ ands r1, r1, #0x01 /* Check the LOCK bit.*/
+ beq 2b /* loop until bit goes hi. */
lock_end:
-
/*------------------------------------------------------*
- * Turn off the watchdog during init... *
+ * Turn off the watchdog during init... *
*------------------------------------------------------*/
ldr r0, REG_WATCHDOG
ldr r1, WATCHDOG_VAL1
tst r1, #0x10
bne watch2Wait
-
/* Set memory timings corresponding to the new clock speed */
+ ldr r3, VAL_SDRAM_CONFIG_SDF0
/* Check execution location to determine current execution location
* and branch to appropriate initialization code.
*/
- /* Load physical SDRAM base. */
- mov r0, #0x10000000
- /* Get current execution location. */
- mov r1, pc
- /* Compare. */
- cmp r1, r0
- /* Skip over EMIF-fast initialization if running from SDRAM. */
- bge skip_sdram
+ mov r0, #0x10000000 /* Load physical SDRAM base. */
+ mov r1, pc /* Get current execution location. */
+ cmp r1, r0 /* Compare. */
+ bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */
+
+ /* identify the device revision, -- TMX or TMP(TMS) */
+ ldr r0, REG_DEVICE_ID
+ ldr r1, [r0]
+
+ ldr r0, VAL_DEVICE_ID_TMP
+ mov r1, r1, lsl #15
+ mov r1, r1, lsr #16
+ cmp r0, r1
+ bne skip_TMP_Patch
+
+ /* Enable TMP/TMS device new features */
+ mov r0, #1
+ ldr r1, REG_TC_EMIFF_DOUBLER
+ str r0, [r1]
+
+ /* Enable new ac parameters */
+ mov r0, #0x0b
+ ldr r1, REG_SDRAM_CONFIG2
+ str r0, [r1]
+
+ ldr r3, VAL_SDRAM_CONFIG_SDF1
+
+skip_TMP_Patch:
/*
* Delay for SDRAM initialization.
*/
- mov r3, #0x1800 /* value should be checked */
+ mov r0, #0x1800 /* value should be checked */
3:
- subs r3, r3, #0x1 /* Decrement count */
+ subs r0, r0, #0x1 /* Decrement count */
bne 3b
-
/*
* Set SDRAM control values. Disable refresh before MRS command.
*/
/* config register */
ldr r0, REG_SDRAM_CONFIG
- ldr r1, SDRAM_CONFIG_VAL
- str r1, [r0]
+ str r3, [r0]
/* manual command register */
ldr r0, REG_SDRAM_MANUAL_CMD
+
/* issue set cke high */
mov r1, #CMD_SDRAM_CKE_SET_HIGH
str r1, [r0]
+
/* issue nop */
mov r1, #CMD_SDRAM_NOP
str r1, [r0]
str r1, [r0]
/* delay loop */
- mov r2, #0x0100
+ mov r0, #0x0100
waitMDDR2:
- subs r2, r2, #1
+ subs r0, r0, #1
bne waitMDDR2
/*
* Delay for SDRAM initialization.
*/
- mov r3, #0x1800
+ mov r0, #0x1800
4:
- subs r3, r3, #1 /* Decrement count. */
+ subs r0, r0, #1 /* Decrement count. */
bne 4b
b common_tc
skip_sdram:
-
ldr r0, REG_SDRAM_CONFIG
- ldr r1, SDRAM_CONFIG_VAL
- str r1, [r0]
+ str r3, [r0]
common_tc:
/* slow interface */
ldr r1, VAL_TC_EMIFS_CS1_CONFIG
ldr r0, REG_TC_EMIFS_CS1_CONFIG
str r1, [r0] /* Chip Select 1 */
+
ldr r1, VAL_TC_EMIFS_CS3_CONFIG
ldr r0, REG_TC_EMIFS_CS3_CONFIG
str r1, [r0] /* Chip Select 3 */
+ ldr r1, VAL_TC_EMIFS_DWS
+ ldr r0, REG_TC_EMIFS_DWS
+ str r1, [r0] /* Enable EMIFS.RDY for CS1 (ether) */
+
#ifdef CONFIG_H2_OMAP1610
/* inserting additional 2 clock cycle hold time for LAN */
ldr r0, REG_TC_EMIFS_CS1_ADVANCED
/* the literal pools origin */
.ltorg
-
-REG_TC_EMIFS_CONFIG: /* 32 bits */
+REG_DEVICE_ID: /* 32 bits */
+ .word 0xfffe2004
+REG_TC_EMIFS_CONFIG:
.word 0xfffecc0c
REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
.word 0xfffecc10
.word 0xfffecc18
REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
.word 0xfffecc1c
-
+REG_TC_EMIFS_DWS: /* 32 bits */
+ .word 0xfffecc40
#ifdef CONFIG_H2_OMAP1610
REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */
.word 0xfffecc54
/* MPU clock/reset/power mode control registers */
REG_ARM_CKCTL: /* 16 bits */
.word 0xfffece00
-
REG_ARM_IDLECT3: /* 16 bits */
.word 0xfffece24
REG_ARM_IDLECT2: /* 16 bits */
.word 0xfffece08
REG_ARM_IDLECT1: /* 16 bits */
.word 0xfffece04
-
REG_ARM_RSTCT2: /* 16 bits */
.word 0xfffece14
REG_ARM_SYSST: /* 16 bits */
.word 0xfffece18
+
/* DPLL control registers */
REG_DPLL1_CTL: /* 16 bits */
.word 0xfffecf00
counter @8192 rows, 10 ns, 8 burst */
REG_SDRAM_CONFIG:
.word 0xfffecc20
+REG_SDRAM_CONFIG2:
+ .word 0xfffecc3c
+REG_TC_EMIFF_DOUBLER: /* 32 bits */
+ .word 0xfffecc60
/* Operation register */
REG_SDRAM_OPERATION:
REG_DLL_WRT_CONTROL:
.word 0xfffecc68
DLL_WRT_CONTROL_VAL:
- .word 0x03f00002
+ .word 0x03f00002 /* Phase of 72deg, write offset +31 */
/* URD DLL register */
REG_DLL_URD_CONTROL:
.word 0xfffeccc0
DLL_URD_CONTROL_VAL:
- .word 0x00800002
+ .word 0x00800002 /* Phase of 72deg, read offset +31 */
/* LRD DLL register */
REG_DLL_LRD_CONTROL:
.word 0xfffecccc
+DLL_LRD_CONTROL_VAL:
+ .word 0x00800002 /* read offset +31 */
REG_WATCHDOG:
.word 0xfffec808
+WATCHDOG_VAL1:
+ .word 0x000000f5
+WATCHDOG_VAL2:
+ .word 0x000000a0
REG_MPU_LOAD_TIMER:
- .word 0xfffec600
+ .word 0xfffec504
REG_MPU_CNTL_TIMER:
.word 0xfffec500
+VAL_MPU_LOAD_TIMER:
+ .word 0xffffffff
+VAL_MPU_CNTL_TIMER:
+ .word 0xffffffa1
/* 96 MHz Samsung Mobile DDR */
-SDRAM_CONFIG_VAL:
- .word 0x001200f4
+/* Original setting for TMX device */
+VAL_SDRAM_CONFIG_SDF0:
+ .word 0x0014e6fe
-DLL_LRD_CONTROL_VAL:
- .word 0x00800002
+/* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */
+VAL_SDRAM_CONFIG_SDF1:
+ .word 0x0114e6fe
VAL_ARM_CKCTL:
- .word 0x3000
+ .word 0x2000 /* was: 0x3000, now use CLK_REF for timer input */
VAL_DPLL1_CTL:
.word 0x2830
VAL_TC_EMIFS_CS2_CONFIG:
.word 0x000055f0
VAL_TC_EMIFS_CS3_CONFIG:
- .word 0x88011131
+ .word 0x88013141
+VAL_TC_EMIFS_DWS: /* Enable EMIFS.RDY for CS1 access (ether) */
+ .word 0x000000c0
+VAL_DEVICE_ID_TMP: /* TMP/TMS=0xb65f, TMX=0xb58c */
+ .word 0xb65f
#endif
#ifdef CONFIG_H2_OMAP1610
VAL_TC_EMIFS_CS2_CONFIG:
.word 0xf800f22a
VAL_TC_EMIFS_CS3_CONFIG:
- .word 0x88011131
+ .word 0x88013141
VAL_TC_EMIFS_CS1_ADVANCED:
.word 0x00000022
#endif
-VAL_TC_EMIFF_SDRAM_CONFIG:
- .word 0x010290fc
-VAL_TC_EMIFF_MRS:
- .word 0x00000027
-
VAL_ARM_IDLECT1:
.word 0x00000400
-
VAL_ARM_IDLECT2:
.word 0x00000886
VAL_ARM_IDLECT3:
.word 0x00000015
-WATCHDOG_VAL1:
- .word 0x000000f5
-WATCHDOG_VAL2:
- .word 0x000000a0
-
-VAL_MPU_LOAD_TIMER:
- .word 0xffffffff
-VAL_MPU_CNTL_TIMER:
- .word 0xffffffa1
-
/* command values */
-.equ CMD_SDRAM_NOP, 0x00000000
-.equ CMD_SDRAM_PRECHARGE, 0x00000001
-.equ CMD_SDRAM_AUTOREFRESH, 0x00000002
-.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007
+.equ CMD_SDRAM_NOP, 0x00000000
+.equ CMD_SDRAM_PRECHARGE, 0x00000001
+.equ CMD_SDRAM_AUTOREFRESH, 0x00000002
+.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007
*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
}
+
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ puts("Board: OSK5912");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
LIB = lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o
+OBJS = interrupts.o cpu.o cpuinfo.o
all: .depend $(START) $(LIB)
--- /dev/null
+/*
+ * OMAP1 CPU identification code
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm926ejs.h>
+
+#if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP)
+
+#define omap_readw(x) *(volatile unsigned short *)(x)
+#define omap_readl(x) *(volatile unsigned long *)(x)
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#define OMAP_DIE_ID_0 0xfffe1800
+#define OMAP_DIE_ID_1 0xfffe1804
+#define OMAP_PRODUCTION_ID_0 0xfffe2000
+#define OMAP_PRODUCTION_ID_1 0xfffe2004
+#define OMAP32_ID_0 0xfffed400
+#define OMAP32_ID_1 0xfffed404
+
+struct omap_id {
+ u16 jtag_id; /* Used to determine OMAP type */
+ u8 die_rev; /* Processor revision */
+ u32 omap_id; /* OMAP revision */
+ u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */
+};
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] = {
+ { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
+ { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
+ { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+ { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
+ { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
+ { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
+ { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
+ { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
+ { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+ { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+ { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
+ { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
+ { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
+ { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
+ { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
+ { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
+ { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
+ { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
+ { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
+};
+
+/*
+ * Get OMAP type from PROD_ID.
+ * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
+ * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
+ * Undocumented register in TEST BLOCK is used as fallback; This seems to
+ * work on 1510, 1610 & 1710. The official way hopefully will work in future
+ * processors.
+ */
+static u16 omap_get_jtag_id(void)
+{
+ u32 prod_id, omap_id;
+
+ prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
+ omap_id = omap_readl(OMAP32_ID_1);
+
+ /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730 */
+ if (((prod_id >> 20) == 0) || (prod_id == omap_id))
+ prod_id = 0;
+ else
+ prod_id &= 0xffff;
+
+ if (prod_id)
+ return prod_id;
+
+ /* Use OMAP32_ID_1 as fallback */
+ prod_id = ((omap_id >> 12) & 0xffff);
+
+ return prod_id;
+}
+
+/*
+ * Get OMAP revision from DIE_REV.
+ * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
+ * Undocumented register in the TEST BLOCK is used as fallback.
+ * REVISIT: This does not seem to work on 1510
+ */
+static u8 omap_get_die_rev(void)
+{
+ u32 die_rev;
+
+ die_rev = omap_readl(OMAP_DIE_ID_1);
+
+ /* Check for broken OMAP_DIE_ID on early 1710 */
+ if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
+ die_rev = 0;
+
+ die_rev = (die_rev >> 17) & 0xf;
+ if (die_rev)
+ return die_rev;
+
+ die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
+
+ return die_rev;
+}
+
+static unsigned long dpll1(void)
+{
+ unsigned short pll_ctl_val = omap_readw(DPLL_CTL_REG);
+ unsigned long rate;
+
+ rate = CONFIG_SYS_CLK_FREQ; /* Base xtal rate */
+ if (pll_ctl_val & 0x10) {
+ /* PLL enabled, apply multiplier and divisor */
+ if (pll_ctl_val & 0xf80)
+ rate *= (pll_ctl_val & 0xf80) >> 7;
+ rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+ } else {
+ /* PLL disabled, apply bypass divisor */
+ switch (pll_ctl_val & 0xc) {
+ case 0:
+ break;
+ case 0x4:
+ rate /= 2;
+ break;
+ default:
+ rate /= 4;
+ break;
+ }
+ }
+
+ return rate;
+}
+
+static unsigned long armcore(void)
+{
+ unsigned short arm_ckctl = omap_readw(ARM_CKCTL);
+
+ return (dpll1() >> ((arm_ckctl & 0x0030) >> 4));
+}
+
+int print_cpuinfo (void)
+{
+ int i;
+ u16 jtag_id;
+ u8 die_rev;
+ u32 omap_id;
+ u8 cpu_type;
+ u32 system_serial_high;
+ u32 system_serial_low;
+ u32 system_rev = 0;
+
+ jtag_id = omap_get_jtag_id();
+ die_rev = omap_get_die_rev();
+ omap_id = omap_readl(OMAP32_ID_0);
+
+#ifdef DEBUG
+ printf("OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+ printf("OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+ omap_readl(OMAP_DIE_ID_1),
+ (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
+ printf("OMAP_PRODUCTION_ID_0: 0x%08x\n", omap_readl(OMAP_PRODUCTION_ID_0));
+ printf("OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+ omap_readl(OMAP_PRODUCTION_ID_1),
+ omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
+ printf("OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+ printf("OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+ printf("JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+#endif
+
+ system_serial_high = omap_readl(OMAP_DIE_ID_0);
+ system_serial_low = omap_readl(OMAP_DIE_ID_1);
+
+ /* First check only the major version in a safe way */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == (omap_ids[i].jtag_id)) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Check if we can find the die revision */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Finally check also the omap_id */
+ for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+ if (jtag_id == omap_ids[i].jtag_id
+ && die_rev == omap_ids[i].die_rev
+ && omap_id == omap_ids[i].omap_id) {
+ system_rev = omap_ids[i].type;
+ break;
+ }
+ }
+
+ /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
+ cpu_type = system_rev >> 24;
+
+ switch (cpu_type) {
+ case 0x07:
+ system_rev |= 0x07;
+ break;
+ case 0x03:
+ case 0x15:
+ system_rev |= 0x15;
+ break;
+ case 0x16:
+ case 0x17:
+ system_rev |= 0x16;
+ break;
+ case 0x24:
+ system_rev |= 0x24;
+ break;
+ default:
+ printf("Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+ }
+
+ printf("CPU: OMAP%04x", system_rev >> 16);
+ if ((system_rev >> 8) & 0xff)
+ printf("%x", (system_rev >> 8) & 0xff);
+#ifdef DEBUG
+ printf(" revision %i handled as %02xxx id: %08x%08x",
+ die_rev, system_rev & 0xff, system_serial_low, system_serial_high);
+#endif
+ printf(" at %ld.%01ld MHz (DPLL1=%ld.%01ld MHz)\n",
+ armcore() / 1000000, (armcore() / 100000) % 10,
+ dpll1() / 1000000, (dpll1() / 100000) % 10);
+
+ return 0;
+}
+
+#endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ * from .s file by awk -f s2h.awk
+ */
+/* Size defintions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif
+
+/* END */
#define CONFIG_OMAP1610 1 /* 5912 is same as 1610 */
#define CONFIG_OSK_OMAP5912 1 /* a OSK Board */
+#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
+#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
+
/* input clock of PLL */
/* the OMAP5912 OSK has 12MHz input clock */
#define CONFIG_SYS_CLK_FREQ 12000000
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */
+
+#define CFG_FLASH_BASE PHYS_FLASH_1
-#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
/*-----------------------------------------------------------------------
- * FLASH and environment organization
+ * FLASH driver setup
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+
+#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */
#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
-/* addr of environment */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000)
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
#define CFG_ENV_IS_IN_FLASH 1
+/* addr of environment */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000)
+
#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
#define CFG_ENV_OFFSET 0x20000 /* environment starts here */
projects / platform / kernel / u-boot.git / commitdiff