arm64: zynqmp: Sync psgtr location on zcu100/zcu106

psgtr node should be below pinctrl for easier comparion among dts files.
That's why move that nodes to different location.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index cad1a23..45dd7da 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -483,6 +483,13 @@
        };
 };
 
+&psgtr {
+       status = "okay";
+       /* usb3, dp */
+       clocks = <&si5335_0>, <&si5335_1>;
+       clock-names = "ref0", "ref1";
+};
+
 &rtc {
        status = "okay";
 };
@@ -518,13 +525,6 @@
        };
 };
 
-&psgtr {
-       status = "okay";
-       /* usb3, dp */
-       clocks = <&si5335_0>, <&si5335_1>;
-       clock-names = "ref0", "ref1";
-};
-
 &spi0 { /* Low Speed connector */
        status = "okay";
        label = "LS-SPI0";

diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index d7140fc..2b1255d 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -947,6 +947,13 @@
        };
 };
 
+&psgtr {
+       status = "okay";
+       /* nc, sata, usb3, dp */
+       clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+       clock-names = "ref1", "ref2", "ref3";
+};
+
 &qspi {
        status = "okay";
        is-dual = <1>;
@@ -977,13 +984,6 @@
        };
 };
 
-&psgtr {
-       status = "okay";
-       /* nc, sata, usb3, dp */
-       clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
-       clock-names = "ref1", "ref2", "ref3";
-};
-
 &rtc {
        status = "okay";
 };