RSNIe = IE_WPA2;
}
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+ if (pAd->StaCfg.WpaSupplicantUP != 1)
+#endif // SIOCSIWGENIE //
+#endif
RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0);
// Check for WPA PMK cache list
}
}
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+ if (pAd->StaCfg.WpaSupplicantUP == 1)
+ {
+ MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
+ pAd->StaCfg.RSNIE_Len, pAd->StaCfg.RSN_IE,
+ END_OF_ARGS);
+ }
+ else
+#endif
+#endif
{
MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp,
1, &RSNIe,
FrameLen += tmp;
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+ if (pAd->StaCfg.WpaSupplicantUP != 1)
+#endif
+#endif
{
// Append Variable IE
NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1);
RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &TimerCancelled);
if(Status == MLME_SUCCESS)
{
+#ifdef RT2860
// go to procedure listed on page 376
AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
&EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
}
+#endif
+#ifdef RT2870
+ UCHAR MaxSupportedRateIn500Kbps = 0;
+ UCHAR idx;
+
+ // supported rates array may not be sorted. sort it and find the maximum rate
+ for (idx=0; idx<SupRateLen; idx++)
+ {
+ if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
+ MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
+ }
+
+ for (idx=0; idx<ExtRateLen; idx++)
+ {
+ if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
+ MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
+ }
+ // go to procedure listed on page 376
+ AssocPostProc(pAd, Addr2, CapabilityInfo, Aid, SupRate, SupRateLen, ExtRate, ExtRateLen,
+ &EdcaParm, &HtCapability, HtCapabilityLen, &AddHtInfo);
+ StaAddMacTableEntry(pAd, &pAd->MacTab.Content[BSSID_WCID], MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo);
+#endif
pAd->StaCfg.CkipFlag = CkipFlag;
if (CkipFlag & 0x18)
{
return 0;
}
+
+#ifdef RT2870
+BOOLEAN StaAddMacTableEntry(
+ IN PRTMP_ADAPTER pAd,
+ IN PMAC_TABLE_ENTRY pEntry,
+ IN UCHAR MaxSupportedRateIn500Kbps,
+ IN HT_CAPABILITY_IE *pHtCapability,
+ IN UCHAR HtCapabilityLen,
+ IN USHORT CapabilityInfo)
+{
+ UCHAR MaxSupportedRate = RATE_11;
+
+ if (ADHOC_ON(pAd))
+ CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
+
+ switch (MaxSupportedRateIn500Kbps)
+ {
+ case 108: MaxSupportedRate = RATE_54; break;
+ case 96: MaxSupportedRate = RATE_48; break;
+ case 72: MaxSupportedRate = RATE_36; break;
+ case 48: MaxSupportedRate = RATE_24; break;
+ case 36: MaxSupportedRate = RATE_18; break;
+ case 24: MaxSupportedRate = RATE_12; break;
+ case 18: MaxSupportedRate = RATE_9; break;
+ case 12: MaxSupportedRate = RATE_6; break;
+ case 22: MaxSupportedRate = RATE_11; break;
+ case 11: MaxSupportedRate = RATE_5_5; break;
+ case 4: MaxSupportedRate = RATE_2; break;
+ case 2: MaxSupportedRate = RATE_1; break;
+ default: MaxSupportedRate = RATE_11; break;
+ }
+
+ if ((pAd->CommonCfg.PhyMode == PHY_11G) && (MaxSupportedRate < RATE_FIRST_OFDM_RATE))
+ return FALSE;
+
+ // 11n only
+ if (((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G))&& (HtCapabilityLen == 0))
+ return FALSE;
+
+ if (!pEntry)
+ return FALSE;
+
+ NdisAcquireSpinLock(&pAd->MacTabLock);
+ if (pEntry)
+ {
+ pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
+ if ((MaxSupportedRate < RATE_FIRST_OFDM_RATE) ||
+ (pAd->CommonCfg.PhyMode == PHY_11B))
+ {
+ pEntry->RateLen = 4;
+ if (MaxSupportedRate >= RATE_FIRST_OFDM_RATE)
+ MaxSupportedRate = RATE_11;
+ }
+ else
+ pEntry->RateLen = 12;
+
+ pEntry->MaxHTPhyMode.word = 0;
+ pEntry->MinHTPhyMode.word = 0;
+ pEntry->HTPhyMode.word = 0;
+ pEntry->MaxSupportedRate = MaxSupportedRate;
+ if (pEntry->MaxSupportedRate < RATE_FIRST_OFDM_RATE)
+ {
+ pEntry->MaxHTPhyMode.field.MODE = MODE_CCK;
+ pEntry->MaxHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
+ pEntry->MinHTPhyMode.field.MODE = MODE_CCK;
+ pEntry->MinHTPhyMode.field.MCS = pEntry->MaxSupportedRate;
+ pEntry->HTPhyMode.field.MODE = MODE_CCK;
+ pEntry->HTPhyMode.field.MCS = pEntry->MaxSupportedRate;
+ }
+ else
+ {
+ pEntry->MaxHTPhyMode.field.MODE = MODE_OFDM;
+ pEntry->MaxHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
+ pEntry->MinHTPhyMode.field.MODE = MODE_OFDM;
+ pEntry->MinHTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
+ pEntry->HTPhyMode.field.MODE = MODE_OFDM;
+ pEntry->HTPhyMode.field.MCS = OfdmRateToRxwiMCS[pEntry->MaxSupportedRate];
+ }
+ pEntry->CapabilityInfo = CapabilityInfo;
+ CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_AGGREGATION_CAPABLE);
+ CLIENT_STATUS_CLEAR_FLAG(pEntry, fCLIENT_STATUS_PIGGYBACK_CAPABLE);
+ }
+
+ // If this Entry supports 802.11n, upgrade to HT rate.
+ if ((HtCapabilityLen != 0) && (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
+ {
+ UCHAR j, bitmask; //k,bitmask;
+ CHAR i;
+
+ if (ADHOC_ON(pAd))
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE);
+ if ((pHtCapability->HtCapInfo.GF) && (pAd->CommonCfg.DesiredHtPhy.GF))
+ {
+ pEntry->MaxHTPhyMode.field.MODE = MODE_HTGREENFIELD;
+ }
+ else
+ {
+ pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
+ pAd->MacTab.fAnyStationNonGF = TRUE;
+ pAd->CommonCfg.AddHTInfo.AddHtInfo2.NonGfPresent = 1;
+ }
+
+ if ((pHtCapability->HtCapInfo.ChannelWidth) && (pAd->CommonCfg.DesiredHtPhy.ChannelWidth))
+ {
+ pEntry->MaxHTPhyMode.field.BW= BW_40;
+ pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor40)&(pHtCapability->HtCapInfo.ShortGIfor40));
+ }
+ else
+ {
+ pEntry->MaxHTPhyMode.field.BW = BW_20;
+ pEntry->MaxHTPhyMode.field.ShortGI = ((pAd->CommonCfg.DesiredHtPhy.ShortGIfor20)&(pHtCapability->HtCapInfo.ShortGIfor20));
+ pAd->MacTab.fAnyStation20Only = TRUE;
+ }
+
+ // 3*3
+ if (pAd->MACVersion >= RALINK_2883_VERSION && pAd->MACVersion < RALINK_3070_VERSION)
+ pEntry->MaxHTPhyMode.field.TxBF = pAd->CommonCfg.RegTransmitSetting.field.TxBF;
+
+ // find max fixed rate
+ for (i=23; i>=0; i--) // 3*3
+ {
+ j = i/8;
+ bitmask = (1<<(i-(j*8)));
+ if ((pAd->StaCfg.DesiredHtPhyInfo.MCSSet[j] & bitmask) && (pHtCapability->MCSSet[j] & bitmask))
+ {
+ pEntry->MaxHTPhyMode.field.MCS = i;
+ break;
+ }
+ if (i==0)
+ break;
+ }
+
+
+ if (pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO)
+ {
+ if (pAd->StaCfg.DesiredTransmitSetting.field.MCS == 32)
+ {
+ // Fix MCS as HT Duplicated Mode
+ pEntry->MaxHTPhyMode.field.BW = 1;
+ pEntry->MaxHTPhyMode.field.MODE = MODE_HTMIX;
+ pEntry->MaxHTPhyMode.field.STBC = 0;
+ pEntry->MaxHTPhyMode.field.ShortGI = 0;
+ pEntry->MaxHTPhyMode.field.MCS = 32;
+ }
+ else if (pEntry->MaxHTPhyMode.field.MCS > pAd->StaCfg.HTPhyMode.field.MCS)
+ {
+ // STA supports fixed MCS
+ pEntry->MaxHTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
+ }
+ }
+
+ pEntry->MaxHTPhyMode.field.STBC = (pHtCapability->HtCapInfo.RxSTBC & (pAd->CommonCfg.DesiredHtPhy.TxSTBC));
+ pEntry->MpduDensity = pHtCapability->HtCapParm.MpduDensity;
+ pEntry->MaxRAmpduFactor = pHtCapability->HtCapParm.MaxRAmpduFactor;
+ pEntry->MmpsMode = (UCHAR)pHtCapability->HtCapInfo.MimoPs;
+ pEntry->AMsduSize = (UCHAR)pHtCapability->HtCapInfo.AMsduSize;
+ pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
+
+ if (pAd->CommonCfg.DesiredHtPhy.AmsduEnable && (pAd->CommonCfg.REGBACapability.field.AutoBA == FALSE))
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_AMSDU_INUSED);
+ if (pHtCapability->HtCapInfo.ShortGIfor20)
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI20_CAPABLE);
+ if (pHtCapability->HtCapInfo.ShortGIfor40)
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_SGI40_CAPABLE);
+ if (pHtCapability->HtCapInfo.TxSTBC)
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_TxSTBC_CAPABLE);
+ if (pHtCapability->HtCapInfo.RxSTBC)
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RxSTBC_CAPABLE);
+ if (pHtCapability->ExtHtCapInfo.PlusHTC)
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_HTC_CAPABLE);
+ if (pAd->CommonCfg.bRdg && pHtCapability->ExtHtCapInfo.RDGSupport)
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_RDG_CAPABLE);
+ if (pHtCapability->ExtHtCapInfo.MCSFeedback == 0x03)
+ CLIENT_STATUS_SET_FLAG(pEntry, fCLIENT_STATUS_MCSFEEDBACK_CAPABLE);
+ }
+ else
+ {
+ pAd->MacTab.fAnyStationIsLegacy = TRUE;
+ }
+
+ NdisMoveMemory(&pEntry->HTCapability, pHtCapability, sizeof(HT_CAPABILITY_IE));
+
+ pEntry->HTPhyMode.word = pEntry->MaxHTPhyMode.word;
+ pEntry->CurrTxRate = pEntry->MaxSupportedRate;
+
+ // Set asic auto fall back
+ if (pAd->StaCfg.bAutoTxRateSwitch == TRUE)
+ {
+ PUCHAR pTable;
+ UCHAR TableSize = 0;
+
+ MlmeSelectTxRateTable(pAd, pEntry, &pTable, &TableSize, &pEntry->CurrTxRateIndex);
+ pEntry->bAutoTxRateSwitch = TRUE;
+ }
+ else
+ {
+ pEntry->HTPhyMode.field.MODE = pAd->StaCfg.HTPhyMode.field.MODE;
+ pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
+ pEntry->bAutoTxRateSwitch = FALSE;
+
+ // If the legacy mode is set, overwrite the transmit setting of this entry.
+ RTMPUpdateLegacyTxSetting((UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode, pEntry);
+ }
+
+ pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
+ pEntry->Sst = SST_ASSOC;
+ pEntry->AuthState = AS_AUTH_OPEN;
+ pEntry->AuthMode = pAd->StaCfg.AuthMode;
+ pEntry->WepStatus = pAd->StaCfg.WepStatus;
+
+ NdisReleaseSpinLock(&pAd->MacTabLock);
+
+ {
+ union iwreq_data wrqu;
+ wext_notify_event_assoc(pAd);
+
+ memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
+ memcpy(wrqu.ap_addr.sa_data, pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
+ wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+ }
+ return TRUE;
+}
+#endif /* RT2870 */
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
}
break;
+#ifdef RT2870
+ //
+ // This state is for that we want to connect to an AP but
+ // it didn't find on BSS List table. So we need to scan the air first,
+ // after that we can try to connect to the desired AP if available.
+ //
+ case CNTL_WAIT_SCAN_FOR_CONNECT:
+ if(Elem->MsgType == MT2_SCAN_CONF)
+ {
+ // Resume TxRing after SCANING complete. We hope the out-of-service time
+ // won't be too long to let upper layer time-out the waiting frames
+ RTMPResumeMsduTransmission(pAd);
+#ifdef CCX_SUPPORT
+ if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED)
+ {
+ // Cisco scan request is finished, prepare beacon report
+ MlmeEnqueue(pAd, AIRONET_STATE_MACHINE, MT2_AIRONET_SCAN_DONE, 0, NULL);
+ }
+#endif // CCX_SUPPORT //
+ pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
+
+ //
+ // Check if we can connect to.
+ //
+ BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
+ if (pAd->MlmeAux.SsidBssTab.BssNr > 0)
+ {
+ MlmeAutoReconnectLastSSID(pAd);
+ }
+ }
+ break;
+#endif // RT2870 //
default:
DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)", Elem->MsgType));
break;
MLME_DISASSOC_REQ_STRUCT DisassocReq;
ULONG Now;
+#ifdef RT2860
// BBP and RF are not accessible in PS mode, we has to wake them up first
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, RTMP_HALT);
+#endif
// Step 1. record the desired user settings to MlmeAux
NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
}
}
+
+#ifdef RT2870
+VOID AdhocTurnOnQos(
+ IN PRTMP_ADAPTER pAd)
+{
+#define AC0_DEF_TXOP 0
+#define AC1_DEF_TXOP 0
+#define AC2_DEF_TXOP 94
+#define AC3_DEF_TXOP 47
+
+ // Turn on QOs if use HT rate.
+ if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
+ {
+ pAd->CommonCfg.APEdcaParm.bValid = TRUE;
+ pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
+ pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
+ pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
+ pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
+
+ pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
+ pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
+
+ pAd->CommonCfg.APEdcaParm.Cwmax[0] = 10;
+ pAd->CommonCfg.APEdcaParm.Cwmax[1] = 6;
+ pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
+ pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
+
+ pAd->CommonCfg.APEdcaParm.Txop[0] = 0;
+ pAd->CommonCfg.APEdcaParm.Txop[1] = 0;
+ pAd->CommonCfg.APEdcaParm.Txop[2] = AC2_DEF_TXOP;
+ pAd->CommonCfg.APEdcaParm.Txop[3] = AC3_DEF_TXOP;
+ }
+ AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
+}
+#endif /* RT2870 */
+
/*
==========================================================================
Description:
UCHAR Value = 0, idx;
MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry;
+#ifdef RT2860
if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))
{
RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT);
RTMPusecDelay(6000);
pAd->bPCIclkOff = FALSE;
}
+#endif
pEntry = &pAd->MacTab.Content[BSSID_WCID];
//rt2860b. Don't know why need this
SwitchBetweenWepAndCkip(pAd);
+#ifdef RT2860
// Before power save before link up function, We will force use 1R.
// So after link up, check Rx antenna # again.
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
pAd->StaCfg.BBPR3 = Value;
+#endif /* RT2860 */
if (BssType == BSS_ADHOC)
{
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
+#ifdef RT30xx
+ if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) &&
+ (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE))
+ {
+ pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
+ }
+ else if ((pAd->CommonCfg.Channel > 2) &&
+ (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) &&
+ (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW))
+ {
+ pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
+ }
+#endif
+#ifdef RT2870
+ if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
+ AdhocTurnOnQos(pAd);
+#endif
+
DBGPRINT(RT_DEBUG_TRACE, ("!!!Adhoc LINK UP !!! \n" ));
}
else
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
Value &= (~0x20);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RT2860
pAd->StaCfg.BBPR3 = Value;
+#endif
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
Data &= 0xfffffffe;
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
Value |= (0x20);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RT2860
pAd->StaCfg.BBPR3 = Value;
+#endif
if (pAd->MACVersion == 0x28600100)
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
Value &= (~0x20);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
+#ifdef RT2860
pAd->StaCfg.BBPR3 = Value;
+#endif
if (pAd->MACVersion == 0x28600100)
{
IV |= (pAd->StaCfg.DefaultKeyId << 30);
AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0);
+#ifdef RT2860
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
}
// NOTE:
// the decision of using "short slot time" or not may change dynamically due to
{
pAd->IndicateMediaState = NdisMediaStateConnected;
pAd->ExtraInfo = GENERAL_LINK_UP;
+#ifdef RT2870
+ RTMP_IndicateMediaState(pAd);
+#endif
}
// --
+#ifdef RT2860
RTMP_IndicateMediaState(pAd);
+#endif
// Add BSSID in my MAC Table.
NdisAcquireSpinLock(&pAd->MacTabLock);
pAd->MacTab.Size = 1; // infra mode always set MACtab size =1.
pAd->MacTab.Content[BSSID_WCID].Sst = SST_ASSOC;
pAd->MacTab.Content[BSSID_WCID].AuthState = SST_ASSOC;
+#ifdef RT30xx
+ pAd->MacTab.Content[BSSID_WCID].AuthMode = pAd->StaCfg.AuthMode;
+#endif
pAd->MacTab.Content[BSSID_WCID].WepStatus = pAd->StaCfg.WepStatus;
NdisReleaseSpinLock(&pAd->MacTabLock);
// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
//
// if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is.
+#ifdef RT30xx
+ if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) &&
+ (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+ || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))))
+#endif
+#ifndef RT30xx
if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))
+#endif
{
RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
Data &= 0xFFFFFF00;
}
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
+#ifdef RT2860
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
+#endif
}
/*
IN BOOLEAN IsReqFromAP)
{
UCHAR i, ByteValue = 0;
+#ifdef RT2860
BOOLEAN Cancelled;
+#endif
// Do nothing if monitor mode is on
if (MONITOR_ON(pAd))
return;
+#ifdef RT2860
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
// Not allow go to sleep within linkdown function.
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
if (pAd->CommonCfg.bWirelessEvent)
{
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n"));
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
BOOLEAN Cancelled;
}
pAd->bPCIclkOff = FALSE;
+#endif
if (ADHOC_ON(pAd)) // Adhoc mode link down
{
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
// Update extra information to link is up
pAd->ExtraInfo = GENERAL_LINK_DOWN;
+#ifdef RT2860
pAd->StaCfg.AdhocBOnlyJoined = FALSE;
pAd->StaCfg.AdhocBGJoined = FALSE;
pAd->StaCfg.Adhoc20NJoined = FALSE;
+#endif
pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
// Reset the Current AP's IP address
NdisZeroMemory(pAd->StaCfg.AironetIPAddress, 4);
+#ifdef RT2870
+ pAd->bUsbTxBulkAggre = FALSE;
+#endif // RT2870 //
// Clean association information
NdisZeroMemory(&pAd->StaCfg.AssocInfo, sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
+#ifdef RT2860
// Allow go to sleep after linkdown steps.
RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
+#endif
{
union iwreq_data wrqu;
memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
}
+
+#ifdef RT30xx
+ if (IS_RT3090(pAd))
+ {
+ UINT32 macdata;
+ // disable MMPS BBP control register
+ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &ByteValue);
+ ByteValue &= ~(0x04); //bit 2
+ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, ByteValue);
+
+ // disable MMPS MAC control register
+ RTMP_IO_READ32(pAd, 0x1210, &macdata);
+ macdata &= ~(0x09); //bit 0, 3
+ RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+ }
+#endif // RT30xx //
}
/*
==========================================================================
*/
+
+
+#ifdef RT2870
+
+VOID MlmeCntlConfirm(
+ IN PRTMP_ADAPTER pAd,
+ IN ULONG MsgType,
+ IN USHORT Msg)
+{
+ MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MsgType, sizeof(USHORT), &Msg);
+}
+#endif
+
VOID ComposePsPoll(
IN PRTMP_ADAPTER pAd)
{
+#ifdef RT2870
+ PTXINFO_STRUC pTxInfo;
+ PTXWI_STRUC pTxWI;
+
+ DBGPRINT(RT_DEBUG_TRACE, ("ComposePsPoll\n"));
+#endif
NdisZeroMemory(&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
+
+#ifdef RT2870
+ pAd->PsPollFrame.FC.PwrMgmt = 0;
+#endif
pAd->PsPollFrame.FC.Type = BTYPE_CNTL;
pAd->PsPollFrame.FC.SubType = SUBTYPE_PS_POLL;
pAd->PsPollFrame.Aid = pAd->StaActive.Aid | 0xC000;
COPY_MAC_ADDR(pAd->PsPollFrame.Bssid, pAd->CommonCfg.Bssid);
COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);
+
+#ifdef RT2870
+ RTMPZeroMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0], 100);
+ pTxInfo = (PTXINFO_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[0];
+ RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(PSPOLL_FRAME)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
+ pTxWI = (PTXWI_STRUC)&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
+ RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(PSPOLL_FRAME)),
+ 0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
+ RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
+ // Append 4 extra zero bytes.
+ pAd->PsPollContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4;
+#endif
}
// IRQL = DISPATCH_LEVEL
VOID ComposeNullFrame(
IN PRTMP_ADAPTER pAd)
{
+#ifdef RT2870
+ PTXINFO_STRUC pTxInfo;
+ PTXWI_STRUC pTxWI;
+#endif
+
NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11));
pAd->NullFrame.FC.Type = BTYPE_DATA;
pAd->NullFrame.FC.SubType = SUBTYPE_NULL_FUNC;
COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->CommonCfg.Bssid);
COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
+#ifdef RT2870
+ RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], 100);
+ pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
+ RTMPWriteTxInfo(pAd, pTxInfo, (USHORT)(sizeof(HEADER_802_11)+TXWI_SIZE), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
+ pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
+ RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE, TRUE, FALSE, 0, BSSID_WCID, (sizeof(HEADER_802_11)),
+ 0, 0, (UCHAR)pAd->CommonCfg.MlmeTransmit.field.MCS, IFS_BACKOFF, FALSE, &pAd->CommonCfg.MlmeTransmit);
+ RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXWI_SIZE+TXINFO_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
+ pAd->NullContext.BulkOutSize = TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
+#endif
}
if (pAd->StaCfg.DesireSharedKey[idx].KeyLen > 0)
{
+#ifdef RT2860
MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[BSSID_WCID];
// Set key material and cipherAlg to Asic
pAd->IndicateMediaState = NdisMediaStateConnected;
pAd->ExtraInfo = GENERAL_LINK_UP;
+#endif
+#ifdef RT2870
+ union
+ {
+ char buf[sizeof(NDIS_802_11_WEP)+MAX_LEN_OF_KEY- 1];
+ NDIS_802_11_WEP keyinfo;
+ } WepKey;
+ int len;
+
+
+ NdisZeroMemory(&WepKey, sizeof(WepKey));
+ len =pAd->StaCfg.DesireSharedKey[idx].KeyLen;
+
+ NdisMoveMemory(WepKey.keyinfo.KeyMaterial,
+ pAd->StaCfg.DesireSharedKey[idx].Key,
+ pAd->StaCfg.DesireSharedKey[idx].KeyLen);
+
+ WepKey.keyinfo.KeyIndex = 0x80000000 + idx;
+ WepKey.keyinfo.KeyLength = len;
+ pAd->SharedKey[BSS0][idx].KeyLen =(UCHAR) (len <= 5 ? 5 : 13);
+
+ pAd->IndicateMediaState = NdisMediaStateConnected;
+ pAd->ExtraInfo = GENERAL_LINK_UP;
+ // need to enqueue cmd to thread
+ RTUSBEnqueueCmdFromNdis(pAd, OID_802_11_ADD_WEP, TRUE, &WepKey, sizeof(WepKey.keyinfo) + len - 1);
+#endif // RT2870 //
// For Preventing ShardKey Table is cleared by remove key procedure.
pAd->SharedKey[BSS0][idx].CipherAlg = CipherAlg;
pAd->SharedKey[BSS0][idx].KeyLen = pAd->StaCfg.DesireSharedKey[idx].KeyLen;
{
// We should collect RSSI not only U2M data but also my beacon
+#ifdef RT30xx
+ if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))
+ && (pAd->RxAnt.EvaluatePeriod == 0))
+#endif
+#ifndef RT30xx
if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)))
+#endif
{
Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1);
}
+#ifdef RT30xx
+ // collect rssi information for antenna diversity
+ if (pAd->NicConfig2.field.AntDiversity)
+ {
+ if ((pRxD->U2M) || ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))))
+ {
+ COLLECT_RX_ANTENNA_AVERAGE_RSSI(pAd, ConvertToRssi(pAd, (UCHAR)pRxWI->RSSI0, RSSI_0), 0); //Note: RSSI2 not used on RT73
+ pAd->StaCfg.NumOfAvgRssiSample ++;
+ }
+ }
+#endif // RT30xx //
+
// First check the size, it MUST not exceed the mlme queue size
if (pRxWI->MPDUtotalByteCount > MGMT_DMA_BUFFER_SIZE)
{
break;
}
+#ifdef RT2860
if (RxProcessed++ > MAX_RX_PROCESS_CNT)
{
// need to reschedule rx handle
bReschedule = TRUE;
break;
}
+#endif
RxProcessed ++; // test
}
}
+#ifdef RT2860
// fRTMP_PS_GO_TO_SLEEP_NOW is set if receiving beacon.
if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW) && (INFRA_ON(pAd)))
{
AsicSleepThenAutoWakeup(pAd, pAd->ThisTbttNumToNextWakeUp);
bReschedule = FALSE;
}
+#endif
return bReschedule;
}
VOID RTMPHandleTwakeupInterrupt(
IN PRTMP_ADAPTER pAd)
{
+#ifdef RT2860
AsicForceWakeup(pAd, DOT11POWERSAVE);
+#endif
+#ifdef RT2870
+ AsicForceWakeup(pAd, FALSE);
+#endif
}
/*
//
UserPriority = 0;
QueIdx = QID_AC_BE;
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+#endif
+#ifdef RT2870
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED) &&
+ CLIENT_STATUS_TEST_FLAG(pEntry, fCLIENT_STATUS_WMM_CAPABLE))
+#endif
{
USHORT Protocol;
UCHAR LlcSnapLen = 0, Byte0, Byte1;
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
if ((pAd->CommonCfg.BACapability.field.AutoBA == TRUE)&&
+#ifdef RT2860
(pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE))
+#endif
+#ifdef RT2870
+ IS_HT_STA(pEntry))
+#endif
{
if (((pEntry->TXBAbitmap & (1<<UserPriority)) == 0) &&
((pEntry->BADeclineBitmap & (1<<UserPriority)) == 0) &&
========================================================================
*/
+
+#ifdef RT2870
+/*
+ Actually, this function used to check if the TxHardware Queue still has frame need to send.
+ If no frame need to send, go to sleep, else, still wake up.
+*/
+#endif
NDIS_STATUS RTMPFreeTXDRequest(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
IN UCHAR NumberRequired,
IN PUCHAR FreeNumberIs)
{
+#ifdef RT2860
ULONG FreeNumber = 0;
+#endif
NDIS_STATUS Status = NDIS_STATUS_FAILURE;
+#ifdef RT2870
+ unsigned long IrqFlags;
+ HT_TX_CONTEXT *pHTTXContext;
+#endif
switch (QueIdx)
{
case QID_AC_VI:
case QID_AC_VO:
case QID_HCCA:
+#ifdef RT2860
if (pAd->TxRing[QueIdx].TxSwFreeIdx > pAd->TxRing[QueIdx].TxCpuIdx)
FreeNumber = pAd->TxRing[QueIdx].TxSwFreeIdx - pAd->TxRing[QueIdx].TxCpuIdx - 1;
else
if (FreeNumber >= NumberRequired)
Status = NDIS_STATUS_SUCCESS;
+#endif
+#ifdef RT2870
+ {
+ pHTTXContext = &pAd->TxContext[QueIdx];
+ RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
+ if ((pHTTXContext->CurWritePosition != pHTTXContext->ENextBulkOutPosition) ||
+ (pHTTXContext->IRPPending == TRUE))
+ {
+ Status = NDIS_STATUS_FAILURE;
+ }
+ else
+ {
+ Status = NDIS_STATUS_SUCCESS;
+ }
+ RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[QueIdx], IrqFlags);
+ }
+#endif
break;
case QID_MGMT:
+#ifdef RT2860
if (pAd->MgmtRing.TxSwFreeIdx > pAd->MgmtRing.TxCpuIdx)
FreeNumber = pAd->MgmtRing.TxSwFreeIdx - pAd->MgmtRing.TxCpuIdx - 1;
else
if (FreeNumber >= NumberRequired)
Status = NDIS_STATUS_SUCCESS;
+#endif
+#ifdef RT2870
+ if (pAd->MgmtRing.TxSwFreeIdx != MGMT_RING_SIZE)
+ Status = NDIS_STATUS_FAILURE;
+ else
+ Status = NDIS_STATUS_SUCCESS;
+#endif
break;
default:
DBGPRINT(RT_DEBUG_ERROR,("RTMPFreeTXDRequest::Invalid QueIdx(=%d)\n", QueIdx));
break;
}
+#ifdef RT2860
*FreeNumberIs = (UCHAR)FreeNumber;
+#endif
return (Status);
}
//
// Kick out Tx
//
+#ifdef RT2860
if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
pAd->RalinkCounters.KickTxCount++;
//
// Kick out Tx
//
+#ifdef RT2860
if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
}
//
// Kick out Tx
//
+#ifdef RT2860
if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
}
//
// Kick out Tx
//
+#ifdef RT2860
if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX))
+#endif
HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx);
}
if ((pAd->StaCfg.Psm == PWR_SAVE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
{
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicForceWakeup At HardTx\n"));
+#ifdef RT2860
AsicForceWakeup(pAd, FROM_TX);
+#endif
+#ifdef RT2870
+ AsicForceWakeup(pAd, TRUE);
+#endif
}
// It should not change PSM bit, when APSD turn on.
*/
#include "../rt_config.h"
+#ifdef RT2860
#define AC0_DEF_TXOP 0
#define AC1_DEF_TXOP 0
#define AC2_DEF_TXOP 94
}
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
}
+#endif /* RT2860 */
+#ifdef RT2870
+#define ADHOC_ENTRY_BEACON_LOST_TIME (2*OS_HZ) // 2 sec
+#endif
/*
==========================================================================
// Increase the scan retry counters.
pAd->StaCfg.ScanCnt++;
+#ifdef RT2860
if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
(IDLE_ON(pAd)) &&
(pAd->StaCfg.bRadio == TRUE) &&
{
RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
}
+#endif
// first check the parameter sanity
if (MlmeScanReqSanity(pAd,
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx));
+#ifdef RT2860
if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
(IDLE_ON(pAd)) &&
(pAd->StaCfg.bRadio == TRUE) &&
{
RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
}
+#endif
// reset all the timers
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
// Add the safeguard against the mismatch of adhoc wep status
if (pAd->StaCfg.WepStatus != pAd->ScanTab.BssEntry[Bssidx].WepStatus)
{
+#ifdef RT30xx
+ DBGPRINT(RT_DEBUG_TRACE, ("SYNC - Not matched wep status %d %d\n", pAd->StaCfg.WepStatus, pAd->ScanTab.BssEntry[Bssidx].WepStatus));
+ DBGPRINT(RT_DEBUG_TRACE, ("bssid=%s\n", pAd->ScanTab.BssEntry[Bssidx].Bssid));
+#endif
return;
}
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
}
+#ifdef RT2860
// at least one 11b peer joined. downgrade the MaxTxRate to 11Mbps
// after last 11b peer left for several seconds, we'll auto switch back to 11G rate
// in MlmePeriodicExec()
+#endif
if (ADHOC_ON(pAd) && (CAP_IS_IBSS_ON(CapabilityInfo)))
{
+#ifdef RT2860
BOOLEAN bRestart;
BOOLEAN bnRestart;
}
}
}
+#endif /* RT2860 */
+#ifdef RT2870
+ UCHAR MaxSupportedRateIn500Kbps = 0;
+ UCHAR idx;
+ MAC_TABLE_ENTRY *pEntry;
+
+ // supported rates array may not be sorted. sort it and find the maximum rate
+ for (idx=0; idx<SupRateLen; idx++)
+ {
+ if (MaxSupportedRateIn500Kbps < (SupRate[idx] & 0x7f))
+ MaxSupportedRateIn500Kbps = SupRate[idx] & 0x7f;
+ }
+
+ for (idx=0; idx<ExtRateLen; idx++)
+ {
+ if (MaxSupportedRateIn500Kbps < (ExtRate[idx] & 0x7f))
+ MaxSupportedRateIn500Kbps = ExtRate[idx] & 0x7f;
+ }
+
+ // look up the existing table
+ pEntry = MacTableLookup(pAd, Addr2);
+
+ // Ad-hoc mode is using MAC address as BA session. So we need to continuously find newly joined adhoc station by receiving beacon.
+ // To prevent always check this, we use wcid == RESERVED_WCID to recognize it as newly joined adhoc station.
+ if ((ADHOC_ON(pAd) && (Elem->Wcid == RESERVED_WCID)) ||
+ (pEntry && ((pEntry->LastBeaconRxTime + ADHOC_ENTRY_BEACON_LOST_TIME) < Now)))
+ {
+ if (pEntry == NULL)
+ // Another adhoc joining, add to our MAC table.
+ pEntry = MacTableInsertEntry(pAd, Addr2, BSS0, FALSE);
+
+ if (StaAddMacTableEntry(pAd, pEntry, MaxSupportedRateIn500Kbps, &HtCapability, HtCapabilityLen, CapabilityInfo) == FALSE)
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("ADHOC - Add Entry failed.\n"));
+ return;
+ }
+
+ if (pEntry &&
+ (Elem->Wcid == RESERVED_WCID))
+ {
+ idx = pAd->StaCfg.DefaultKeyId;
+ RT28XX_STA_SECURITY_INFO_ADD(pAd, BSS0, idx, pEntry);
+ }
+ }
+
+ if (pEntry && pEntry->ValidAsCLI)
+ pEntry->LastBeaconRxTime = Now;
+
+ // At least another peer in this IBSS, declare MediaState as CONNECTED
+ if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
+ {
+ OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
+
+ pAd->IndicateMediaState = NdisMediaStateConnected;
+ RTMP_IndicateMediaState(pAd);
+ pAd->ExtraInfo = GENERAL_LINK_UP;
+ AsicSetBssid(pAd, pAd->CommonCfg.Bssid);
+
+ // 2003/03/12 - john
+ // Make sure this entry in "ScanTab" table, thus complies to Microsoft's policy that
+ // "site survey" result should always include the current connected network.
+ //
+ Bssidx = BssTableSearch(&pAd->ScanTab, Bssid, Channel);
+ if (Bssidx == BSS_NOT_FOUND)
+ {
+ Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, Ssid, SsidLen, BssType, BeaconPeriod,
+ &CfParm, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen, &HtCapability,
+ &AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, RealRssi, TimeStamp, 0,
+ &EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
+ }
+ DBGPRINT(RT_DEBUG_TRACE, ("ADHOC fOP_STATUS_MEDIA_STATE_CONNECTED.\n"));
+ }
+#endif /* RT2870 */
}
if (INFRA_ON(pAd))
// 5. otherwise, put PHY back to sleep to save battery.
if (MessageToMe)
{
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
}
+#endif
if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable &&
pAd->CommonCfg.bAPSDAC_BE && pAd->CommonCfg.bAPSDAC_BK && pAd->CommonCfg.bAPSDAC_VI && pAd->CommonCfg.bAPSDAC_VO)
{
}
else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM))
{
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
}
+#endif
}
else if ((pAd->TxSwQueue[QID_AC_BK].Number != 0) ||
(pAd->TxSwQueue[QID_AC_BE].Number != 0) ||
{
// TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme
// can we cheat here (i.e. just check MGMT & AC_BE) for better performance?
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
}
+#endif
}
else
{
if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
{
+#ifdef RT2860
// Set a flag to go to sleep . Then after parse this RxDoneInterrupt, will go to sleep mode.
RTMP_SET_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
pAd->ThisTbttNumToNextWakeUp = TbttNumToNextWakeUp;
+#endif
+#ifdef RT2870
+ AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
+#endif
}
}
}
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
+#ifndef RT30xx
else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
+#endif
//hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK);
}
// Get GTK length - refer to IEEE 802.11i-2004 p.82
GTKLEN = pKDE->Len -6;
+#ifdef RT30xx
+ if (GTKLEN < LEN_AES_KEY)
+#endif
+#ifndef RT30xx
if (GTKLEN < MIN_LEN_OF_GTK)
+#endif
{
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
return FALSE;
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
+#ifndef RT30xx
else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
+#endif
return TRUE;
projects / platform / kernel / linux-amlogic.git / commitdiff