pata_efar: fix PIO2 underclocking

Fix the PIO mode 2 using mode 0 timings -- this driver should enable the
fast timing bank starting with PIO2, just like the PIIX/ICH drivers do.
Also, fix/rephrase some comments while at it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 2085e0a..2a6412f 100644 (file)
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,7 +22,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME       "pata_efar"
-#define DRV_VERSION    "0.4.4"
+#define DRV_VERSION    "0.4.5"
 
 /**
  *     efar_pre_reset  -       Enable bits
@@ -98,18 +98,17 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
                            { 2, 1 },
                            { 2, 3 }, };
 
-       if (pio > 2)
-               control |= 1;   /* TIME1 enable */
+       if (pio > 1)
+               control |= 1;   /* TIME */
        if (ata_pio_need_iordy(adev))   /* PIO 3/4 require IORDY */
-               control |= 2;   /* IE enable */
-       /* Intel specifies that the PPE functionality is for disk only */
+               control |= 2;   /* IE */
+       /* Intel specifies that the prefetch/posting is for disk only */
        if (adev->class == ATA_DEV_ATA)
-               control |= 4;   /* PPE enable */
+               control |= 4;   /* PPE */
 
        pci_read_config_word(dev, idetm_port, &idetm_data);
 
-       /* Enable PPE, IE and TIME as appropriate */
-
+       /* Set PPE, IE, and TIME as appropriate */
        if (adev->devno == 0) {
                idetm_data &= 0xCCF0;
                idetm_data |= control;
@@ -129,7 +128,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
                pci_write_config_byte(dev, 0x44, slave_data);
        }
 
-       idetm_data |= 0x4000;   /* Ensure SITRE is enabled */
+       idetm_data |= 0x4000;   /* Ensure SITRE is set */
        pci_write_config_word(dev, idetm_port, idetm_data);
 }