serial: atmel_usart: Fix early debug not work in SPL

Add the uart init function to be used on both probe and the early
debug uart init. For the latter, the input clock should be from
CONFIG_DEBUG_UART_CLOCK.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index 7674f97..8b1e0d5 100644 (file)
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -25,6 +25,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifndef CONFIG_DM_SERIAL
 static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id,
                                         int baudrate)
 {
@@ -66,7 +67,6 @@ static void atmel_serial_activate(atmel_usart3_t *usart)
        __udelay(100);
 }
 
-#ifndef CONFIG_DM_SERIAL
 static void atmel_serial_setbrg(void)
 {
        atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE,
@@ -138,12 +138,37 @@ struct atmel_serial_priv {
        atmel_usart3_t *usart;
 };
 
+static void _atmel_serial_set_brg(atmel_usart3_t *usart,
+                                 ulong usart_clk_rate, int baudrate)
+{
+       unsigned long divisor;
+
+       divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate;
+       writel(USART3_BF(CD, divisor), &usart->brgr);
+}
+
+void _atmel_serial_init(atmel_usart3_t *usart,
+                       ulong usart_clk_rate, int baudrate)
+{
+       writel(USART3_BIT(RXDIS) | USART3_BIT(TXDIS), &usart->cr);
+
+       writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) |
+               USART3_BF(USCLKS, USART3_USCLKS_MCK) |
+               USART3_BF(CHRL, USART3_CHRL_8) |
+               USART3_BF(PAR, USART3_PAR_NONE) |
+               USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr);
+
+       _atmel_serial_set_brg(usart, usart_clk_rate, baudrate);
+
+       writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
+       writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
+}
+
 int atmel_serial_setbrg(struct udevice *dev, int baudrate)
 {
        struct atmel_serial_priv *priv = dev_get_priv(dev);
 
-       atmel_serial_setbrg_internal(priv->usart, 0 /* ignored */, baudrate);
-       atmel_serial_activate(priv->usart);
+       _atmel_serial_set_brg(priv->usart, get_usart_clk_rate(0), baudrate);
 
        return 0;
 }
@@ -202,7 +227,8 @@ static int atmel_serial_probe(struct udevice *dev)
        plat->base_addr = (uint32_t)addr_base;
 #endif
        priv->usart = (atmel_usart3_t *)plat->base_addr;
-       atmel_serial_init_internal(priv->usart);
+
+       _atmel_serial_init(priv->usart, get_usart_clk_rate(0), gd->baudrate);
 
        return 0;
 }
@@ -233,7 +259,7 @@ static inline void _debug_uart_init(void)
 {
        atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE;
 
-       atmel_serial_setbrg_internal(usart, 0, CONFIG_BAUDRATE);
+       _atmel_serial_init(usart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
 }
 
 static inline void _debug_uart_putc(int ch)