net: Rename SPL_NET_SUPPORT to SPL_NET

Rename this option so that CONFIG_IS_ENABLED can be used with it.

Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/common/Makefile b/common/Makefile
index fb0256b..f785260 100644 (file)
--- a/common/Makefile
+++ b/common/Makefile
@@ -69,7 +69,7 @@ endif
 obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
-obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
+obj-$(CONFIG_SPL_NET) += miiphyutil.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
 
 ifdef CONFIG_SPL_USB_HOST

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 690926d..c43df88 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -590,7 +590,7 @@ config SPL_ETH
          drivers in SPL. This permits SPL to load U-Boot over an Ethernet
          link rather than from an on-board peripheral. Environment support
          is required since the network stack uses a number of environment
-         variables. See also SPL_NET_SUPPORT.
+         variables. See also SPL_NET.
 
 config SPL_FS_EXT4
        bool "Support EXT filesystems"
@@ -910,7 +910,7 @@ config UBI_SPL_SILENCE_MSG
 
 endif   # if SPL_UBI
 
-config SPL_NET_SUPPORT
+config SPL_NET
        bool "Support networking"
        help
          Enable support for network devices (such as Ethernet) in SPL.
@@ -919,7 +919,7 @@ config SPL_NET_SUPPORT
          the network stack uses a number of environment variables. See also
          SPL_ETH.
 
-if SPL_NET_SUPPORT
+if SPL_NET
 config SPL_NET_VCI_STRING
        string "BOOTP Vendor Class Identifier string sent by SPL"
        help
@@ -928,7 +928,7 @@ config SPL_NET_VCI_STRING
          of a client.  This is often used in practice to allow for the DHCP
          server to specify different files to load depending on if the ROM,
          SPL or U-Boot itself makes the request
-endif   # if SPL_NET_SUPPORT
+endif   # if SPL_NET
 
 config SPL_NO_CPU_SUPPORT
        bool "Drop CPU code in SPL"
@@ -1222,7 +1222,7 @@ config SPL_USB_ETHER
          USB-connected Ethernet link (such as a USB Ethernet dongle) rather
          than from an onboard peripheral. Environment support is required
          since the network stack uses a number of environment variables.
-         See also SPL_NET_SUPPORT and SPL_ETH.
+         See also SPL_NET and SPL_ETH.
 
 config SPL_DFU
        bool "Support DFU (Device Firmware Upgrade)"

diff --git a/common/spl/Makefile b/common/spl/Makefile
index 40107e3..cb15c8e 100644 (file)
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += spl_nand.o
 obj-$(CONFIG_$(SPL_TPL_)ONENAND_SUPPORT) += spl_onenand.o
 endif
 obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o
-obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
+obj-$(CONFIG_$(SPL_TPL_)NET) += spl_net.o
 obj-$(CONFIG_$(SPL_TPL_)MMC) += spl_mmc.o
 obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
 obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o

diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig
index f411d58..368d013 100644 (file)
--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -21,7 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_SPL_MUSB_NEW=y
 # CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM33xx U-Boot SPL"
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_GADGET=y

diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 4577ee3..7fd90ce 100644 (file)
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -21,7 +21,7 @@ CONFIG_SPL_MUSB_NEW=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_GADGET=y

diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig
index 09cf3d0..658155f 100644 (file)
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -35,7 +35,7 @@ CONFIG_SPL_MUSB_NEW=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="Guardian U-Boot SPL"
 CONFIG_SPL_POWER=y
 CONFIG_SPL_USB_GADGET=y

diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig
index 2a70ffc..aa1e196 100644 (file)
--- a/configs/am335x_sl50_defconfig
+++ b/configs/am335x_sl50_defconfig
@@ -29,7 +29,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_POWER=y

diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index f5f2e19..4960ec2 100644 (file)
--- a/configs/am43xx_evm_defconfig
+++ b/configs/am43xx_evm_defconfig
@@ -21,7 +21,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_USB_HOST=y

diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig
index e98fac5..820fc07 100644 (file)
--- a/configs/am43xx_hs_evm_defconfig
+++ b/configs/am43xx_hs_evm_defconfig
@@ -30,7 +30,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
 CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y

diff --git a/configs/chromebook_link64_defconfig b/configs/chromebook_link64_defconfig
index 147cf68..c43d9dc 100644 (file)
--- a/configs/chromebook_link64_defconfig
+++ b/configs/chromebook_link64_defconfig
@@ -35,7 +35,7 @@ CONFIG_SPL_CPU=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_PCI=y
 CONFIG_SPL_PCH=y
 CONFIG_SPL_RTC=y

diff --git a/configs/chromebook_samus_tpl_defconfig b/configs/chromebook_samus_tpl_defconfig
index d97c305..b231b3b 100644 (file)
--- a/configs/chromebook_samus_tpl_defconfig
+++ b/configs/chromebook_samus_tpl_defconfig
@@ -34,7 +34,7 @@ CONFIG_BLOBLIST_ADDR=0xff7c0000
 CONFIG_HANDOFF=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_PCI=y
 CONFIG_SPL_PCH=y
 CONFIG_TPL_PCI=y

diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig
index ae94e19..2dfb48b 100644 (file)
--- a/configs/qemu-x86_64_defconfig
+++ b/configs/qemu-x86_64_defconfig
@@ -34,7 +34,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_CPU=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET=y
 CONFIG_SPL_PCI=y
 CONFIG_SPL_PCH=y
 CONFIG_SPL_RTC=y

diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network
index e052706..9599729 100644 (file)
--- a/doc/SPL/README.am335x-network
+++ b/doc/SPL/README.am335x-network
@@ -7,7 +7,7 @@ NAND and bricked (empty) board with only a network cable.
 
  I. Building the required images
   1. You have to enable generic SPL configuration options (see
-doc/README.SPL) as well as CONFIG_SPL_NET_SUPPORT,
+doc/README.SPL) as well as CONFIG_SPL_NET,
 CONFIG_SPL_ETH, CONFIG_SPL_LIBGENERIC_SUPPORT and
 CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build
 SPL with support for booting over the network. Also you have to enable

diff --git a/lib/tiny-printf.c b/lib/tiny-printf.c
index 89aaa85..f661fc6 100644 (file)
--- a/lib/tiny-printf.c
+++ b/lib/tiny-printf.c
@@ -48,7 +48,7 @@ static void div_out(struct printf_info *info, unsigned long *num,
                out_dgt(info, dgt);
 }
 
-#ifdef CONFIG_SPL_NET_SUPPORT
+#ifdef CONFIG_SPL_NET
 static void string(struct printf_info *info, char *s)
 {
        char ch;
@@ -178,7 +178,7 @@ static void __maybe_unused pointer(struct printf_info *info, const char *fmt,
                }
                break;
 #endif
-#ifdef CONFIG_SPL_NET_SUPPORT
+#ifdef CONFIG_SPL_NET
        case 'm':
                return mac_address_string(info, ptr, false);
        case 'M':
@@ -270,7 +270,7 @@ static int _vprintf(struct printf_info *info, const char *fmt, va_list va)
                                }
                                break;
                        case 'p':
-                               if (CONFIG_IS_ENABLED(NET_SUPPORT) || _DEBUG) {
+                               if (CONFIG_IS_ENABLED(NET) || _DEBUG) {
                                        pointer(info, fmt, va_arg(va, void *));
                                        /*
                                         * Skip this because it pulls in _ctype which is

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 25a3e7f..7f8c5f0 100644 (file)
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -108,7 +108,7 @@ libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/cdns3/
 libs-y += dts/
 libs-y += fs/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
-libs-$(CONFIG_SPL_NET_SUPPORT) += net/
+libs-$(CONFIG_SPL_NET) += net/
 libs-$(CONFIG_SPL_UNIT_TEST) += test/
 
 head-y         := $(addprefix $(obj)/,$(head-y))

diff --git a/tools/buildman/README b/tools/buildman/README
index 5f99a50..ce27788 100644 (file)
--- a/tools/buildman/README
+++ b/tools/buildman/README
@@ -1010,13 +1010,13 @@ For example:
     ...
     43: Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
     arm:
-    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET=1
     + u-boot-spl.cfg: CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1
-    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET=1
     am335x_evm_usbspl :
-    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET=1
     + u-boot-spl.cfg: CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1
-    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET=1
     44: Convert CONFIG_SPL_USB_HOST to Kconfig
     ...