usb: dwc3: trace: purge dwc3_trace()

Finally get rid of dwc3_trace() hack. If any other
message is truly needed, we should add proper
tracepoints for them instead of hacking around with
dwc3_trace() or similar.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 84de1e4..ffca340 100644 (file)
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_USB_DWC3)                  += dwc3.o
 dwc3-y                                 := core.o
 
 ifneq ($(CONFIG_FTRACE),)
-       dwc3-y                          += debug.o trace.o
+       dwc3-y                          += trace.o
 endif
 
 ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 5e61ef6..037052d 100644 (file)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -305,13 +305,7 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc)
        struct dwc3_event_buffer        *evt;
 
        evt = dwc->ev_buf;
-       dwc3_trace(trace_dwc3_core,
-                       "Event buf %p dma %08llx length %d\n",
-                       evt->buf, (unsigned long long) evt->dma,
-                       evt->length);
-
        evt->lpos = 0;
-
        dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0),
                        lower_32_bits(evt->dma));
        dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0),
@@ -428,9 +422,6 @@ static void dwc3_core_num_eps(struct dwc3 *dwc)
 
        dwc->num_in_eps = DWC3_NUM_IN_EPS(parms);
        dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps;
-
-       dwc3_trace(trace_dwc3_core, "found %d IN and %d OUT endpoints",
-                       dwc->num_in_eps, dwc->num_out_eps);
 }
 
 static void dwc3_cache_hwparams(struct dwc3 *dwc)
@@ -656,13 +647,13 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
                reg |= DWC3_GCTL_GBLHIBERNATIONEN;
                break;
        default:
-               dwc3_trace(trace_dwc3_core, "No power optimization available\n");
+               /* nothing */
+               break;
        }
 
        /* check if current dwc3 is on simulation board */
        if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
-               dwc3_trace(trace_dwc3_core,
-                               "running on FPGA platform\n");
+               dev_info(dwc->dev, "Running with FPGA optmizations\n");
                dwc->is_fpga = true;
        }
 

diff --git a/drivers/usb/dwc3/debug.c b/drivers/usb/dwc3/debug.c
deleted file mode 100644 (file)
index 0be6885..0000000
--- a/drivers/usb/dwc3/debug.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/**
- * debug.c - DesignWare USB3 DRD Controller Debug/Trace Support
- *
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
- *
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "debug.h"
-
-void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...)
-{
-       struct va_format vaf;
-       va_list args;
-
-       va_start(args, fmt);
-       vaf.fmt = fmt;
-       vaf.va = &args;
-
-       trace(&vaf);
-
-       va_end(args);
-}

diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index d93780e..eeed4ff 100644 (file)
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -345,13 +345,6 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
 }
 
 
-#if IS_ENABLED(CONFIG_FTRACE)
-void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...);
-#else
-static inline void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...)
-{  }
-#endif
-
 #ifdef CONFIG_DEBUG_FS
 extern void dwc3_debugfs_init(struct dwc3 *);
 extern void dwc3_debugfs_exit(struct dwc3 *);

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 15b62a5..2b22ea7 100644 (file)
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -49,10 +49,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
        int                             ret;
 
        dep = dwc->eps[epnum];
-       if (dep->flags & DWC3_EP_BUSY) {
-               dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
+       if (dep->flags & DWC3_EP_BUSY)
                return 0;
-       }
 
        trb = &dwc->ep0_trb[dep->trb_enqueue];
 
@@ -144,9 +142,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 
                if (dwc->ep0state == EP0_STATUS_PHASE)
                        __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
-               else
-                       dwc3_trace(trace_dwc3_ep0,
-                                       "too early for delayed status");
 
                return 0;
        }
@@ -210,9 +205,8 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 
        spin_lock_irqsave(&dwc->lock, flags);
        if (!dep->endpoint.desc) {
-               dwc3_trace(trace_dwc3_ep0,
-                               "trying to queue request %p to disabled %s",
-                               request, dep->name);
+               dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
+                               dep->name);
                ret = -ESHUTDOWN;
                goto out;
        }
@@ -574,13 +568,12 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 
        addr = le16_to_cpu(ctrl->wValue);
        if (addr > 127) {
-               dwc3_trace(trace_dwc3_ep0, "invalid device address %d", addr);
+               dev_err(dwc->dev, "invalid device address %d\n", addr);
                return -EINVAL;
        }
 
        if (state == USB_STATE_CONFIGURED) {
-               dwc3_trace(trace_dwc3_ep0,
-                               "trying to set address when configured");
+               dev_err(dwc->dev, "can't SetAddress() from Configured State\n");
                return -EINVAL;
        }
 
@@ -765,35 +758,27 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 
        switch (ctrl->bRequest) {
        case USB_REQ_GET_STATUS:
-               dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS");
                ret = dwc3_ep0_handle_status(dwc, ctrl);
                break;
        case USB_REQ_CLEAR_FEATURE:
-               dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE");
                ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
                break;
        case USB_REQ_SET_FEATURE:
-               dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE");
                ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
                break;
        case USB_REQ_SET_ADDRESS:
-               dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS");
                ret = dwc3_ep0_set_address(dwc, ctrl);
                break;
        case USB_REQ_SET_CONFIGURATION:
-               dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION");
                ret = dwc3_ep0_set_config(dwc, ctrl);
                break;
        case USB_REQ_SET_SEL:
-               dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL");
                ret = dwc3_ep0_set_sel(dwc, ctrl);
                break;
        case USB_REQ_SET_ISOCH_DELAY:
-               dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
                ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
                break;
        default:
-               dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
                ret = dwc3_ep0_delegate_req(dwc, ctrl);
                break;
        }
@@ -869,9 +854,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
        status = DWC3_TRB_SIZE_TRBSTS(trb->size);
        if (status == DWC3_TRBSTS_SETUP_PENDING) {
                dwc->setup_packet_pending = true;
-
-               dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
-
                if (r)
                        dwc3_gadget_giveback(ep0, r, -ECONNRESET);
 
@@ -961,7 +943,7 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc,
 
                ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
                if (ret < 0) {
-                       dwc3_trace(trace_dwc3_ep0, "Invalid Test #%d",
+                       dev_err(dwc->dev, "invalid test #%d\n",
                                        dwc->test_mode_nr);
                        dwc3_ep0_stall_and_restart(dwc);
                        return;
@@ -969,10 +951,8 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc,
        }
 
        status = DWC3_TRB_SIZE_TRBSTS(trb->size);
-       if (status == DWC3_TRBSTS_SETUP_PENDING) {
+       if (status == DWC3_TRBSTS_SETUP_PENDING)
                dwc->setup_packet_pending = true;
-               dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
-       }
 
        dwc->ep0state = EP0_SETUP_PHASE;
        dwc3_ep0_out_start(dwc);
@@ -1022,10 +1002,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 
                ret = usb_gadget_map_request(&dwc->gadget, &req->request,
                                dep->number);
-               if (ret) {
-                       dwc3_trace(trace_dwc3_ep0, "failed to map request");
+               if (ret)
                        return;
-               }
 
                maxpacket = dep->endpoint.maxpacket;
 
@@ -1050,10 +1028,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
        } else {
                ret = usb_gadget_map_request(&dwc->gadget, &req->request,
                                dep->number);
-               if (ret) {
-                       dwc3_trace(trace_dwc3_ep0, "failed to map request");
+               if (ret)
                        return;
-               }
 
                ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
                                req->request.length, DWC3_TRBCTL_CONTROL_DATA,
@@ -1123,8 +1099,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
                if (dwc->ep0_expect_in != event->endpoint_number) {
                        struct dwc3_ep  *dep = dwc->eps[dwc->ep0_expect_in];
 
-                       dwc3_trace(trace_dwc3_ep0,
-                                       "Wrong direction for Data phase");
+                       dev_err(dwc->dev, "unexpected direction for Data Phase\n");
                        dwc3_ep0_end_control_data(dwc, dep);
                        dwc3_ep0_stall_and_restart(dwc);
                        return;
@@ -1140,7 +1115,6 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 
                if (dwc->delayed_status) {
                        WARN_ON_ONCE(event->endpoint_number != 1);
-                       dwc3_trace(trace_dwc3_ep0, "Delayed Status");
                        return;
                }
 

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7e39f0c..e47cba5 100644 (file)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -139,9 +139,6 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
                udelay(5);
        }
 
-       dwc3_trace(trace_dwc3_gadget,
-                       "link state change request timed out");
-
        return -ETIMEDOUT;
 }
 
@@ -1115,8 +1112,7 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
        u32 uf;
 
        if (list_empty(&dep->pending_list)) {
-               dwc3_trace(trace_dwc3_gadget,
-                               "ISOC ep %s run out for requests",
+               dev_info(dwc->dev, "%s: ran out of requests\n",
                                dep->name);
                dep->flags |= DWC3_EP_PENDING_REQUEST;
                return;
@@ -1145,16 +1141,15 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
        int                     ret;
 
        if (!dep->endpoint.desc) {
-               dwc3_trace(trace_dwc3_gadget,
-                               "trying to queue request %p to disabled %s",
-                               &req->request, dep->endpoint.name);
+               dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
+                               dep->name);
                return -ESHUTDOWN;
        }
 
        if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
                                &req->request, req->dep->name)) {
-               dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'",
-                               &req->request, req->dep->name);
+               dev_err(dwc->dev, "%s: request %p belongs to '%s'\n",
+                               dep->name, &req->request, req->dep->name);
                return -EINVAL;
        }
 
@@ -1204,10 +1199,6 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
                return 0;
 
        ret = __dwc3_gadget_kick_transfer(dep, 0);
-       if (ret && ret != -EBUSY)
-               dwc3_trace(trace_dwc3_gadget,
-                               "%s: failed to kick transfers",
-                               dep->name);
        if (ret == -EBUSY)
                ret = 0;
 
@@ -1226,7 +1217,6 @@ static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep)
        struct usb_request              *request;
        struct usb_ep                   *ep = &dep->endpoint;
 
-       dwc3_trace(trace_dwc3_gadget, "queueing ZLP");
        request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
        if (!request)
                return -ENOMEM;
@@ -1345,9 +1335,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 
                if (!protocol && ((dep->direction && transfer_in_flight) ||
                                (!dep->direction && started))) {
-                       dwc3_trace(trace_dwc3_gadget,
-                                       "%s: pending request, cannot halt",
-                                       dep->name);
                        return -EAGAIN;
                }
 
@@ -1465,10 +1452,8 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 
        speed = reg & DWC3_DSTS_CONNECTSPD;
        if ((speed == DWC3_DSTS_SUPERSPEED) ||
-           (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
-               dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed");
+           (speed == DWC3_DSTS_SUPERSPEED_PLUS))
                return 0;
-       }
 
        link_state = DWC3_DSTS_USBLNKST(reg);
 
@@ -1477,9 +1462,6 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
        case DWC3_LINK_STATE_U3:        /* in HS, means SUSPEND */
                break;
        default:
-               dwc3_trace(trace_dwc3_gadget,
-                               "can't wakeup from '%s'",
-                               dwc3_gadget_link_string(link_state));
                return -EINVAL;
        }
 
@@ -1584,11 +1566,6 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
        if (!timeout)
                return -ETIMEDOUT;
 
-       dwc3_trace(trace_dwc3_gadget, "gadget %s data soft-%s",
-                       dwc->gadget_driver
-                       ? dwc->gadget_driver->function : "no-function",
-                       is_on ? "connect" : "disconnect");
-
        return 0;
 }
 
@@ -1910,8 +1887,6 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
                dep->endpoint.name = dep->name;
                spin_lock_init(&dep->lock);
 
-               dwc3_trace(trace_dwc3_gadget, "initializing %s", dep->name);
-
                if (epnum == 0 || epnum == 1) {
                        usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
                        dep->endpoint.maxburst = 1;
@@ -1958,15 +1933,13 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 
        ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
        if (ret < 0) {
-               dwc3_trace(trace_dwc3_gadget,
-                               "failed to allocate OUT endpoints");
+               dev_err(dwc->dev, "failed to initialize OUT endpoints\n");
                return ret;
        }
 
        ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
        if (ret < 0) {
-               dwc3_trace(trace_dwc3_gadget,
-                               "failed to allocate IN endpoints");
+               dev_err(dwc->dev, "failed to initialize IN endpoints\n");
                return ret;
        }
 
@@ -2041,9 +2014,6 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
                if (count) {
                        trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
                        if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
-                               dwc3_trace(trace_dwc3_gadget,
-                                               "%s: incomplete IN transfer",
-                                               dep->name);
                                /*
                                 * If missed isoc occurred and there is
                                 * no request queued then issue END
@@ -2669,8 +2639,6 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
                        (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) {
                if ((dwc->link_state == DWC3_LINK_STATE_U3) &&
                                (next == DWC3_LINK_STATE_RESUME)) {
-                       dwc3_trace(trace_dwc3_gadget,
-                                       "ignoring transition U3 -> Resume");
                        return;
                }
        }
@@ -2804,11 +2772,7 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
                break;
        case DWC3_DEVICE_EVENT_EOPF:
                /* It changed to be suspend event for version 2.30a and above */
-               if (dwc->revision < DWC3_REVISION_230A) {
-                       dwc3_trace(trace_dwc3_gadget, "End of Periodic Frame");
-               } else {
-                       dwc3_trace(trace_dwc3_gadget, "U3/L1-L2 Suspend Event");
-
+               if (dwc->revision >= DWC3_REVISION_230A) {
                        /*
                         * Ignore suspend event until the gadget enters into
                         * USB_STATE_CONFIGURED state.
@@ -3059,8 +3023,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
         * composite.c that we are USB 2.0 + LPM ECN.
         */
        if (dwc->revision < DWC3_REVISION_220A)
-               dwc3_trace(trace_dwc3_gadget,
-                               "Changing max_speed on rev %08x",
+               dev_info(dwc->dev, "changing max_speed on rev %08x\n",
                                dwc->revision);
 
        dwc->gadget.max_speed           = dwc->maximum_speed;