value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd));
value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd));
- /* Write the value back to sytem register */
+ /* Write the value back to system register */
rtw_write8(padapter, offset, value);
break;
case PWR_CMD_POLLING:
*pLength = pktlen;
}
-/* To check if reserved page content is destroyed by beacon beacuse beacon is too large. */
+/* To check if reserved page content is destroyed by beacon because beacon is too large. */
/* 2010.06.23. Added by tynli. */
void CheckFwRsvdPageContent(struct adapter *Adapter)
{
/* (1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. */
/* Input: */
/* bDLFinished - false: At the first time we will send all the packets as a large packet to Hw, */
-/* so we need to set the packet length to total lengh. */
+/* so we need to set the packet length to total length. */
/* true: At the second time, we should send the first packet (default:beacon) */
-/* to Hw again and set the lengh in descriptor to the real beacon lengh. */
+/* to Hw again and set the length in descriptor to the real beacon length. */
/* 2009.10.15 by tynli. */
static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
{
DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
/* */
/* We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */
- /* becuase we need to free the Tx BCN Desc which is used by the first reserved page packet. */
+ /* because we need to free the Tx BCN Desc which is used by the first reserved page packet. */
/* At run time, we cannot get the Tx Desc until it is released in TxHandleInterrupt() so we will return */
/* the beacon TCB in the following code. 2011.11.23. by tynli. */
/* */
{
u16 efuse_max_available_len = 0;
- /* Change to check TYPE_EFUSE_MAP_LEN , beacuse 8188E raw 256, logic map over 256. */
+ /* Change to check TYPE_EFUSE_MAP_LEN , because 8188E raw 256, logic map over 256. */
EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&efuse_max_available_len, false);
if (Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len)
if (chnl <= 14) {
bIn24G = true;
- if (chnl < 3) /* Chanel 1-2 */
+ if (chnl < 3) /* Channel 1-2 */
*pGroup = 0;
else if (chnl < 6) /* Channel 3-5 */
*pGroup = 1;
/* */
/* 1. Read PHY_REG.TXT BB INIT!! */
- /* We will seperate as 88C / 92C according to chip version */
+ /* We will separate as 88C / 92C according to chip version */
/* */
if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG))
rtStatus = _FAIL;
/* */
/* Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to */
- /* 3dbm, and OFDM HT equals to 0dbm repectively. */
+ /* 3dbm, and OFDM HT equals to 0dbm respectively. */
/* Note: */
/* The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */
/* By Bruce, 2008-01-29. */
switch (pHalData->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
regBwOpMode |= BW_OPMODE_20MHZ;
- /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+ /* 2007/02/07 Mark by Emily because we have not verify whether this register works */
rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
break;
case HT_CHANNEL_WIDTH_40:
regBwOpMode &= ~BW_OPMODE_20MHZ;
- /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */
+ /* 2007/02/07 Mark by Emily because we have not verify whether this register works */
rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5);
rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
* tx power mechanism because it is referenced by BT
* coexist mechanism.
* In the future, two mechanism shall be separated from
- * each other and maintained independantly. */
+ * each other and maintained independently. */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
TxAGC[RF_PATH_A] = 0x10101010;
TxAGC[RF_PATH_B] = 0x10101010;
ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 1, &direction, &pwrtrac_value);
if (direction == 1) {
- /* Increase TX pwoer */
+ /* Increase TX power */
TxAGC[0] += pwrtrac_value;
TxAGC[1] += pwrtrac_value;
} else if (direction == 2) {
- /* Decrease TX pwoer */
+ /* Decrease TX power */
TxAGC[0] -= pwrtrac_value;
TxAGC[1] -= pwrtrac_value;
}
if (pHalData->pwrGroupCnt == 1)
chnlGroup = 0;
if (pHalData->pwrGroupCnt >= pHalData->PGMaxGroup) {
- if (Channel < 3) /* Chanel 1-2 */
+ if (Channel < 3) /* Channel 1-2 */
chnlGroup = 0;
else if (Channel < 6) /* Channel 3-5 */
chnlGroup = 1;
}
/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */
/* Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */
-/* In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */
+/* In the future, two mechanism shall be separated from each other and maintained independently. Thanks for Lanhsin's reminder. */
/* 92d do not need this */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
writeVal = 0x14141414;
/* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
/* (1) The sequence number of each non-Qos frame / broadcast / multicast / */
- /* mgnt frame should be controled by Hw because Fw will also send null data */
+ /* mgnt frame should be controlled by Hw because Fw will also send null data */
/* which we cannot control when Fw LPS enable. */
/* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
/* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingTxUpdate()
*
- * Overview: Seperate TX/RX parameters update independent for TP detection and
+ * Overview: Separate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: struct adapter *
*
* Revised History:
* When Who Remark
- * 12/10/2010 MHC Seperate to smaller function.
+ * 12/10/2010 MHC Separate to smaller function.
*
*---------------------------------------------------------------------------*/
static void usb_AggSettingTxUpdate(struct adapter *Adapter)
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingRxUpdate()
*
- * Overview: Seperate TX/RX parameters update independent for TP detection and
+ * Overview: Separate TX/RX parameters update independent for TP detection and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: struct adapter *
*
* Revised History:
* When Who Remark
- * 12/10/2010 MHC Seperate to smaller function.
+ * 12/10/2010 MHC Separate to smaller function.
*
*---------------------------------------------------------------------------*/
static void
/* */
/* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */
- /* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */
+ /* Hw bug which Hw initials RxFF boundary size to a value which is larger than the real Rx buffer size in 88E. */
/* */
/* Enable MACTXEN/MACRXEN block */
value16 = rtw_read16(Adapter, REG_CR);
projects / kernel / kernel-generic.git / commitdiff