num_connectors++;
}
+ WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
+ "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
+
ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
&has_reduced_clock, &reduced_clock);
if (!ok) {
DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
drm_mode_debug_printmodeline(mode);
- /* CPU eDP is the only output that doesn't need a PCH PLL of its own on
- * pre-Haswell/LPT generation */
- if (HAS_PCH_LPT(dev)) {
- DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
- pipe);
- } else if (!is_cpu_edp) {
+ /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
+ if (!is_cpu_edp) {
struct intel_pch_pll *pll;
pll = intel_get_pch_pll(intel_crtc, dpll, fp);
int plane = intel_crtc->plane;
int num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dpll, fp = 0, fp2 = 0;
+ u32 dpll = 0, fp = 0, fp2 = 0;
bool ok, has_reduced_clock = false;
bool is_lvds = false, is_dp = false, is_cpu_edp = false;
struct intel_encoder *encoder;
num_connectors++;
}
- ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
- &has_reduced_clock, &reduced_clock);
- if (!ok) {
- DRM_ERROR("Couldn't find PLL settings for mode!\n");
- return -EINVAL;
+ /* We are not sure yet this won't happen. */
+ WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n",
+ INTEL_PCH_TYPE(dev));
+
+ WARN(num_connectors != 1, "%d connectors attached to pipe %c\n",
+ num_connectors, pipe_name(pipe));
+
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+ ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
+ &has_reduced_clock,
+ &reduced_clock);
+ if (!ok) {
+ DRM_ERROR("Couldn't find PLL settings for mode!\n");
+ return -EINVAL;
+ }
}
/* Ensure that the cursor is valid for the new mode before changing... */
if (is_lvds && dev_priv->lvds_dither)
dither = true;
- fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
- if (has_reduced_clock)
- fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
- reduced_clock.m2;
-
- dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp);
-
DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
drm_mode_debug_printmodeline(mode);
- /* CPU eDP is the only output that doesn't need a PCH PLL of its own on
- * pre-Haswell/LPT generation */
- if (HAS_PCH_LPT(dev)) {
- DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n",
- pipe);
- } else if (!is_cpu_edp) {
- struct intel_pch_pll *pll;
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+ fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+ if (has_reduced_clock)
+ fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+ reduced_clock.m2;
+
+ dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
+ fp);
+
+ /* CPU eDP is the only output that doesn't need a PCH PLL of its
+ * own on pre-Haswell/LPT generation */
+ if (!is_cpu_edp) {
+ struct intel_pch_pll *pll;
+
+ pll = intel_get_pch_pll(intel_crtc, dpll, fp);
+ if (pll == NULL) {
+ DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
+ pipe);
+ return -EINVAL;
+ }
+ } else
+ intel_put_pch_pll(intel_crtc);
- pll = intel_get_pch_pll(intel_crtc, dpll, fp);
- if (pll == NULL) {
- DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
- pipe);
- return -EINVAL;
- }
- } else
- intel_put_pch_pll(intel_crtc);
+ /* The LVDS pin pair needs to be on before the DPLLs are
+ * enabled. This is an exception to the general rule that
+ * mode_set doesn't turn things on.
+ */
+ if (is_lvds) {
+ temp = I915_READ(PCH_LVDS);
+ temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~PORT_TRANS_SEL_MASK;
+ temp |= PORT_TRANS_SEL_CPT(pipe);
+ } else {
+ if (pipe == 1)
+ temp |= LVDS_PIPEB_SELECT;
+ else
+ temp &= ~LVDS_PIPEB_SELECT;
+ }
- /* The LVDS pin pair needs to be on before the DPLLs are enabled.
- * This is an exception to the general rule that mode_set doesn't turn
- * things on.
- */
- if (is_lvds) {
- temp = I915_READ(PCH_LVDS);
- temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
- if (HAS_PCH_CPT(dev)) {
- temp &= ~PORT_TRANS_SEL_MASK;
- temp |= PORT_TRANS_SEL_CPT(pipe);
- } else {
- if (pipe == 1)
- temp |= LVDS_PIPEB_SELECT;
+ /* set the corresponsding LVDS_BORDER bit */
+ temp |= dev_priv->lvds_border_bits;
+ /* Set the B0-B3 data pairs corresponding to whether
+ * we're going to set the DPLLs for dual-channel mode or
+ * not.
+ */
+ if (clock.p2 == 7)
+ temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
else
- temp &= ~LVDS_PIPEB_SELECT;
+ temp &= ~(LVDS_B0B3_POWER_UP |
+ LVDS_CLKB_POWER_UP);
+
+ /* It would be nice to set 24 vs 18-bit mode
+ * (LVDS_A3_POWER_UP) appropriately here, but we need to
+ * look more thoroughly into how panels behave in the
+ * two modes.
+ */
+ temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ temp |= LVDS_HSYNC_POLARITY;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ temp |= LVDS_VSYNC_POLARITY;
+ I915_WRITE(PCH_LVDS, temp);
}
-
- /* set the corresponsding LVDS_BORDER bit */
- temp |= dev_priv->lvds_border_bits;
- /* Set the B0-B3 data pairs corresponding to whether we're going to
- * set the DPLLs for dual-channel mode or not.
- */
- if (clock.p2 == 7)
- temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
- else
- temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
-
- /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
- * appropriately here, but we need to look more thoroughly into how
- * panels behave in the two modes.
- */
- temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
- if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
- temp |= LVDS_HSYNC_POLARITY;
- if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
- temp |= LVDS_VSYNC_POLARITY;
- I915_WRITE(PCH_LVDS, temp);
}
if (is_dp && !is_cpu_edp) {
intel_dp_set_m_n(crtc, mode, adjusted_mode);
} else {
- /* For non-DP output, clear any trans DP clock recovery setting.*/
- I915_WRITE(TRANSDATA_M1(pipe), 0);
- I915_WRITE(TRANSDATA_N1(pipe), 0);
- I915_WRITE(TRANSDPLINK_M1(pipe), 0);
- I915_WRITE(TRANSDPLINK_N1(pipe), 0);
- }
-
- if (intel_crtc->pch_pll) {
- I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-
- /* Wait for the clocks to stabilize. */
- POSTING_READ(intel_crtc->pch_pll->pll_reg);
- udelay(150);
-
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+ /* For non-DP output, clear any trans DP clock recovery
+ * setting.*/
+ I915_WRITE(TRANSDATA_M1(pipe), 0);
+ I915_WRITE(TRANSDATA_N1(pipe), 0);
+ I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+ I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+ }
}
intel_crtc->lowfreq_avail = false;
- if (intel_crtc->pch_pll) {
- if (is_lvds && has_reduced_clock && i915_powersave) {
- I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
- intel_crtc->lowfreq_avail = true;
- } else {
- I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+ if (intel_crtc->pch_pll) {
+ I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(intel_crtc->pch_pll->pll_reg);
+ udelay(150);
+
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
+ }
+
+ if (intel_crtc->pch_pll) {
+ if (is_lvds && has_reduced_clock && i915_powersave) {
+ I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
+ intel_crtc->lowfreq_avail = true;
+ } else {
+ I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
+ }
}
}
ironlake_set_m_n(crtc, mode, adjusted_mode);
- if (is_cpu_edp)
- ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+ if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
+ if (is_cpu_edp)
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
ironlake_set_pipeconf(crtc, adjusted_mode, dither);
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff