(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(2) | \
P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_dot11req_powermgmt \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(3))
-#define DIDmsg_dot11req_powermgmt_powermgmtmode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(3) | \
- P80211DID_MKITEM(1) | 0x00000000)
-#define DIDmsg_dot11req_powermgmt_wakeup \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(3) | \
- P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_dot11req_powermgmt_receivedtims \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(3) | \
- P80211DID_MKITEM(3) | 0x00000000)
-#define DIDmsg_dot11req_powermgmt_resultcode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(3) | \
- P80211DID_MKITEM(4) | 0x00000000)
#define DIDmsg_dot11req_scan \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(4))
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(5) | \
P80211DID_MKITEM(40) | 0x00000000)
-#define DIDmsg_dot11req_join \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6))
-#define DIDmsg_dot11req_join_bssid \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(1) | 0x00000000)
-#define DIDmsg_dot11req_join_joinfailuretimeout \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate1 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(3) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate2 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(4) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate3 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(5) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate4 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(6) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate5 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(7) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate6 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(8) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate7 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(9) | 0x00000000)
-#define DIDmsg_dot11req_join_basicrate8 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(10) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate1 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(11) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate2 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(12) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate3 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(13) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate4 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(14) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate5 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(15) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate6 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(16) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate7 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(17) | 0x00000000)
-#define DIDmsg_dot11req_join_operationalrate8 \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(18) | 0x00000000)
-#define DIDmsg_dot11req_join_resultcode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(6) | \
- P80211DID_MKITEM(19) | 0x00000000)
-#define DIDmsg_dot11req_authenticate \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(7))
-#define DIDmsg_dot11req_authenticate_peerstaaddress \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(7) | \
- P80211DID_MKITEM(1) | 0x00000000)
-#define DIDmsg_dot11req_authenticate_authenticationtype \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(7) | \
- P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_dot11req_authenticate_authenticationfailuretimeout \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(7) | \
- P80211DID_MKITEM(3) | 0x00000000)
-#define DIDmsg_dot11req_authenticate_resultcode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(7) | \
- P80211DID_MKITEM(4) | 0x00000000)
-#define DIDmsg_dot11req_deauthenticate \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(8))
-#define DIDmsg_dot11req_deauthenticate_peerstaaddress \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(8) | \
- P80211DID_MKITEM(1) | 0x00000000)
-#define DIDmsg_dot11req_deauthenticate_reasoncode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(8) | \
- P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_dot11req_deauthenticate_resultcode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(8) | \
- P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_associate \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(9))
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(9) | \
P80211DID_MKITEM(7) | 0x00000000)
-#define DIDmsg_dot11req_reassociate \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10))
-#define DIDmsg_dot11req_reassociate_newapaddress \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10) | \
- P80211DID_MKITEM(1) | 0x00000000)
-#define DIDmsg_dot11req_reassociate_reassociatefailuretimeout \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10) | \
- P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_dot11req_reassociate_cfpollable \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10) | \
- P80211DID_MKITEM(3) | 0x00000000)
-#define DIDmsg_dot11req_reassociate_cfpollreq \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10) | \
- P80211DID_MKITEM(4) | 0x00000000)
-#define DIDmsg_dot11req_reassociate_privacy \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10) | \
- P80211DID_MKITEM(5) | 0x00000000)
-#define DIDmsg_dot11req_reassociate_listeninterval \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10) | \
- P80211DID_MKITEM(6) | 0x00000000)
-#define DIDmsg_dot11req_reassociate_resultcode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(10) | \
- P80211DID_MKITEM(7) | 0x00000000)
-#define DIDmsg_dot11req_disassociate \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(11))
-#define DIDmsg_dot11req_disassociate_peerstaaddress \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(11) | \
- P80211DID_MKITEM(1) | 0x00000000)
-#define DIDmsg_dot11req_disassociate_reasoncode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(11) | \
- P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_dot11req_disassociate_resultcode \
- (P80211DID_MKSECTION(1) | \
- P80211DID_MKGROUP(11) | \
- P80211DID_MKITEM(3) | 0x00000000)
#define DIDmsg_dot11req_reset \
(P80211DID_MKSECTION(1) | \
P80211DID_MKGROUP(12))
(P80211DID_MKSECTION(5) | \
P80211DID_MKGROUP(16) | \
P80211DID_MKITEM(2) | 0x00000000)
-#define DIDmsg_p2req_enable \
- (P80211DID_MKSECTION(5) | \
- P80211DID_MKGROUP(19))
-#define DIDmsg_p2req_enable_resultcode \
- (P80211DID_MKSECTION(5) | \
- P80211DID_MKGROUP(19) | \
- P80211DID_MKITEM(1) | 0x00000000)
#define DIDmib_cat_dot11smt \
P80211DID_MKSECTION(1)
#define DIDmib_dot11smt_p80211Table \
#include "hfa384x.h"
#include "prism2mgmt.h"
-/*================================================================*/
-/* Local Constants */
-
-
-/*================================================================*/
-/* Local Macros */
-
/* Converts 802.11 format rate specifications to prism2 */
#define p80211rate_to_p2bit(n) ((((n)&~BIT7) == 2) ? BIT0 : \
(((n)&~BIT7) == 4) ? BIT1 : \
(((n)&~BIT7) == 11) ? BIT2 : \
(((n)&~BIT7) == 22) ? BIT3 : 0)
-/*================================================================*/
-/* Local Types */
-
-
-/*================================================================*/
-/* Local Static Definitions */
-
-
-/*================================================================*/
-/* Local Function Declarations */
-
-
-/*================================================================*/
-/* Function Definitions */
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_powermgmt
-*
-* Set the power management state of this station's MAC.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_powermgmt(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_powermgmt_t *msg = msgp;
-
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /*
- * Set CNFPMENABLED (on or off)
- * Set CNFMULTICASTRX (if PM on, otherwise clear)
- * Spout a notice stating that SleepDuration and
- * HoldoverDuration and PMEPS also have an impact.
- */
- /* Powermgmt is currently unsupported for STA */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
-
- /* Powermgmt is never supported for AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
-
- DBFEXIT;
- return result;
-}
-
-
/*----------------------------------------------------------------
* prism2mgmt_scan
*
DBFENTER;
- if (hw->ap) {
- WLAN_LOG_ERROR("Prism2 in AP mode cannot perform scans.\n");
- result = 1;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto exit;
- }
-
/* gatekeeper check */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- if (hw->ap) {
- result = 1;
- req->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto exit;
- }
-
if (! hw->scanresults) {
WLAN_LOG_ERROR("dot11req_scan_results can only be used after a successful dot11req_scan.\n");
result = 2;
return result;
}
-
-/*----------------------------------------------------------------
-* prism2mgmt_join
-*
-* Join a BSS whose BSS description was previously obtained with
-* a scan.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_join(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_join_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* TODO: Implement after scan */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
-
- /* Never supported by APs */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
-
- DBFEXIT;
- return result;
-}
-
-
/*----------------------------------------------------------------
* prism2mgmt_p2_join
*
hfa384x_JoinRequest_data_t joinreq;
DBFENTER;
- if (!hw->ap) {
-
- wlandev->macmode = WLAN_MACMODE_NONE;
-
- /*** STATION ***/
- /* Set the PortType */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- /* ess port */
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set Port Type\n");
- goto failed;
- }
-
- /* Set the auth type */
- if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
- reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
- } else {
- reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set Authentication\n");
- goto failed;
- }
-
- /* Turn off all roaming */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE, 3);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to Turn off Roaming\n");
- goto failed;
- }
-
- /* Basic rates */
- reg = 0;
- if ( msg->basicrate1.status == P80211ENUM_msgitem_status_data_ok ) {
- reg = p80211rate_to_p2bit(msg->basicrate1.data);
- }
- if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate2.data);
- }
- if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate3.data);
- }
- if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate4.data);
- }
- if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate5.data);
- }
- if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate6.data);
- }
- if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate7.data);
- }
- if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate8.data);
- }
- if( reg == 0)
- reg = 0x03;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", reg);
- goto failed;
- }
-
- /* Operational rates (supprates and txratecontrol) */
- reg = 0;
- if ( msg->operationalrate1.status == P80211ENUM_msgitem_status_data_ok ) {
- reg = p80211rate_to_p2bit(msg->operationalrate1.data);
- }
- if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate2.data);
- }
- if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate3.data);
- }
- if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate4.data);
- }
- if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate5.data);
- }
- if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate6.data);
- }
- if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate7.data);
- }
- if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate8.data);
- }
- if( reg == 0)
- reg = 0x0f;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set supprates=%d.\n", reg);
- goto failed;
- }
-
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set txrates=%d.\n", reg);
- goto failed;
- }
-
- /* Set the ssid */
- memset(bytebuf, 0, 256);
- pstr = (p80211pstrd_t*)&(msg->ssid.data);
- prism2mgmt_pstr2bytestr(p2bytestr, pstr);
- result = hfa384x_drvr_setconfig(
- hw, HFA384x_RID_CNFDESIREDSSID,
- bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set SSID\n");
- goto failed;
- }
-
- /* Enable the Port */
- result = hfa384x_cmd_enable(hw, 0);
- if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
- goto failed;
- }
-
- /* Fill in the join request */
- joinreq.channel = msg->channel.data;
- memcpy( joinreq.bssid, ((unsigned char *) &msg->bssid.data) + 1, WLAN_BSSID_LEN);
- hw->joinreq = joinreq;
- hw->join_ap = 1;
-
- /* Send the join request */
- result = hfa384x_drvr_setconfig( hw,
- HFA384x_RID_JOINREQUEST,
- &joinreq, HFA384x_RID_JOINREQUEST_LEN);
- if(result != 0) {
- WLAN_LOG_ERROR("Join request failed, result=%d.\n", result);
- goto failed;
- }
-
- } else {
+ wlandev->macmode = WLAN_MACMODE_NONE;
- /*** ACCESS POINT ***/
+ /* Set the PortType */
+ msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+ msg->resultcode.data = P80211ENUM_resultcode_success;
- /* Never supported by APs */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+ /* ess port */
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set Port Type\n");
+ goto failed;
}
- goto done;
-failed:
- WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
- msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
-
-done:
- result = 0;
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_authenticate
-*
-* Station should be begin an authentication exchange.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_authenticate(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_authenticate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* TODO: Decide how we're going to handle this one w/ Prism2 */
- /* It could be entertaining since Prism2 doesn't have */
- /* an explicit way to control this */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+ /* Set the auth type */
+ if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
+ reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
} else {
-
- /*** ACCESS POINT ***/
-
- /* Never supported by APs */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+ reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
}
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_deauthenticate
-*
-* Send a deauthenticate notification.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_deauthenticate(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_deauthenticate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* TODO: Decide how we're going to handle this one w/ Prism2 */
- /* It could be entertaining since Prism2 doesn't have */
- /* an explicit way to control this */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
- hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set Authentication\n");
+ goto failed;
}
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_associate
-*
-* Associate with an ESS.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
- int result = 0;
- p80211msg_dot11req_associate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
-#if 0
- /* Set the TxRates */
- reg = 0x000f;
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
-#endif
-
- /* Set the PortType */
- /* ess port */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
-
- /* Enable the Port */
- hfa384x_drvr_enable(hw, 0);
-
- /* Set the resultcode */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- } else {
+ /* Turn off all roaming */
+ hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE, 3);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to Turn off Roaming\n");
+ goto failed;
+ }
- /*** ACCESS POINT ***/
+ /* Basic rates */
+ reg = 0;
+ if ( msg->basicrate1.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg = p80211rate_to_p2bit(msg->basicrate1.data);
+ }
+ if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->basicrate2.data);
+ }
+ if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->basicrate3.data);
+ }
+ if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->basicrate4.data);
+ }
+ if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->basicrate5.data);
+ }
+ if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->basicrate6.data);
+ }
+ if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->basicrate7.data);
+ }
+ if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->basicrate8.data);
+ }
+ if( reg == 0)
+ reg = 0x03;
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, reg);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", reg);
+ goto failed;
+ }
- /* Never supported on AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+ /* Operational rates (supprates and txratecontrol) */
+ reg = 0;
+ if ( msg->operationalrate1.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg = p80211rate_to_p2bit(msg->operationalrate1.data);
+ }
+ if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->operationalrate2.data);
+ }
+ if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->operationalrate3.data);
+ }
+ if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->operationalrate4.data);
+ }
+ if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->operationalrate5.data);
+ }
+ if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->operationalrate6.data);
+ }
+ if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->operationalrate7.data);
+ }
+ if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+ reg |= p80211rate_to_p2bit(msg->operationalrate8.data);
+ }
+ if( reg == 0)
+ reg = 0x0f;
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, reg);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set supprates=%d.\n", reg);
+ goto failed;
}
- DBFEXIT;
- return result;
-}
-
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set txrates=%d.\n", reg);
+ goto failed;
+ }
-/*----------------------------------------------------------------
-* prism2mgmt_reassociate
-*
-* Renew association because of a BSS change.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_reassociate(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_reassociate_t *msg = msgp;
- DBFENTER;
+ /* Set the ssid */
+ memset(bytebuf, 0, 256);
+ pstr = (p80211pstrd_t*)&(msg->ssid.data);
+ prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+ result = hfa384x_drvr_setconfig(
+ hw, HFA384x_RID_CNFDESIREDSSID,
+ bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set SSID\n");
+ goto failed;
+ }
- if (!hw->ap) {
+ /* Enable the Port */
+ result = hfa384x_cmd_enable(hw, 0);
+ if ( result ) {
+ WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
+ goto failed;
+ }
- /*** STATION ***/
+ /* Fill in the join request */
+ joinreq.channel = msg->channel.data;
+ memcpy( joinreq.bssid, ((unsigned char *) &msg->bssid.data) + 1, WLAN_BSSID_LEN);
+ hw->joinreq = joinreq;
+ hw->join_ap = 1;
- /* TODO: Not supported yet...not sure how we're going to do it */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
+ /* Send the join request */
+ result = hfa384x_drvr_setconfig( hw,
+ HFA384x_RID_JOINREQUEST,
+ &joinreq, HFA384x_RID_JOINREQUEST_LEN);
+ if(result != 0) {
+ WLAN_LOG_ERROR("Join request failed, result=%d.\n", result);
+ goto failed;
+ }
- /*** ACCESS POINT ***/
+ goto done;
+failed:
+ WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
+ msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
- /* Never supported on AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
+done:
+ result = 0;
DBFEXIT;
return result;
}
-
/*----------------------------------------------------------------
-* prism2mgmt_disassociate
+* prism2mgmt_associate
*
-* Send a disassociation notification.
+* Associate with an ESS.
*
* Arguments:
* wlandev wlan device structure
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
-int prism2mgmt_disassociate(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp)
{
- int result = 0;
hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_disassociate_t *msg = msgp;
+ int result = 0;
+ p80211msg_dot11req_associate_t *msg = msgp;
DBFENTER;
- if (!hw->ap) {
+#if 0
+ /* Set the TxRates */
+ reg = 0x000f;
+ hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
+#endif
- /*** STATION ***/
+ /* Set the PortType */
+ /* ess port */
+ hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
- /* TODO: Not supported yet...not sure how to do it */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
+ /* Enable the Port */
+ hfa384x_drvr_enable(hw, 0);
- /*** ACCESS POINT ***/
- hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
- }
+ /* Set the resultcode */
+ msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+ msg->resultcode.data = P80211ENUM_resultcode_success;
DBFEXIT;
return result;
}
-
/*----------------------------------------------------------------
* prism2mgmt_reset
*
p80211pstrd_t *pstr;
UINT8 bytebuf[80];
hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
- hfa384x_PCFInfo_data_t *pcfinfo = (hfa384x_PCFInfo_data_t*)bytebuf;
UINT16 word;
DBFENTER;
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
- if (!hw->ap) {
- /*** ADHOC IBSS ***/
- /* see if current f/w is less than 8c3 */
- if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
- hw->ident_sta_fw.minor,
- hw->ident_sta_fw.variant) <
- HFA384x_FIRMWARE_VERSION(0,8,3)) {
- /* Ad-Hoc not quite supported on Prism2 */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto done;
- }
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /*** STATION ***/
- /* Set the REQUIRED config items */
- /* SSID */
- pstr = (p80211pstrd_t*)&(msg->ssid.data);
- prism2mgmt_pstr2bytestr(p2bytestr, pstr);
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
- bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
- goto failed;
- }
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
- bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
- goto failed;
- }
-
- /* bsstype - we use the default in the ap firmware */
- /* IBSS port */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
-
- /* beacon period */
- word = msg->beaconperiod.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
- goto failed;
- }
-
- /* dschannel */
- word = msg->dschannel.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
- goto failed;
- }
- /* Basic rates */
- word = p80211rate_to_p2bit(msg->basicrate1.data);
- if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate2.data);
- }
- if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate3.data);
- }
- if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate4.data);
- }
- if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate5.data);
- }
- if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate6.data);
- }
- if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate7.data);
- }
- if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate8.data);
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
- goto failed;
- }
-
- /* Operational rates (supprates and txratecontrol) */
- word = p80211rate_to_p2bit(msg->operationalrate1.data);
- if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate2.data);
- }
- if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate3.data);
- }
- if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate4.data);
- }
- if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate5.data);
- }
- if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate6.data);
- }
- if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate7.data);
- }
- if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate8.data);
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
- goto failed;
- }
-
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
- goto failed;
- }
-
- /* Set the macmode so the frame setup code knows what to do */
- if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
- wlandev->macmode = WLAN_MACMODE_IBSS_STA;
- /* lets extend the data length a bit */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
- }
-
- /* Enable the Port */
- result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
- goto failed;
- }
-
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
+ /*** ADHOC IBSS ***/
+ /* see if current f/w is less than 8c3 */
+ if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+ hw->ident_sta_fw.minor,
+ hw->ident_sta_fw.variant) <
+ HFA384x_FIRMWARE_VERSION(0,8,3)) {
+ /* Ad-Hoc not quite supported on Prism2 */
+ msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+ msg->resultcode.data = P80211ENUM_resultcode_not_supported;
goto done;
}
- /*** ACCESS POINT ***/
-
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- /* Validate the command, if BSStype=infra is the tertiary loaded? */
- if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
- WLAN_LOG_ERROR("AP driver cannot create IBSS.\n");
- goto failed;
- } else if ( hw->cap_sup_sta.id != 5) {
- WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
- goto failed;
- }
-
+ /*** STATION ***/
/* Set the REQUIRED config items */
/* SSID */
pstr = (p80211pstrd_t*)&(msg->ssid.data);
prism2mgmt_pstr2bytestr(p2bytestr, pstr);
result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
- bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
+ bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
if ( result ) {
- WLAN_LOG_ERROR("Failed to set SSID, result=0x%04x\n", result);
+ WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
+ goto failed;
+ }
+ result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
+ bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
goto failed;
}
/* bsstype - we use the default in the ap firmware */
+ /* IBSS port */
+ hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
/* beacon period */
word = msg->beaconperiod.data;
WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
goto failed;
}
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL0, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
- goto failed;
- }
-
- /* ibssatimwindow */
- if (msg->ibssatimwindow.status == P80211ENUM_msgitem_status_data_ok) {
- WLAN_LOG_INFO("prism2mgmt_start: atimwindow not used in "
- "Infrastructure mode, ignored.\n");
- }
-
- /* DTIM period */
- word = msg->dtimperiod.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNDTIMPER, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set dtim period=%d.\n", word);
- goto failed;
- }
-
- /* probedelay */
- if (msg->probedelay.status == P80211ENUM_msgitem_status_data_ok) {
- WLAN_LOG_INFO("prism2mgmt_start: probedelay not "
- "supported in prism2, ignored.\n");
- }
-
- /* cfpollable, cfpollreq, cfpperiod, cfpmaxduration */
- if (msg->cfpollable.data == P80211ENUM_truth_true &&
- msg->cfpollreq.data == P80211ENUM_truth_true ) {
- WLAN_LOG_ERROR("cfpollable=cfpollreq=true is illegal.\n");
- result = -1;
- goto failed;
- }
-
- /* read the PCFInfo and update */
- result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFAPPCFINFO,
- pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
- if ( result ) {
- WLAN_LOG_INFO("prism2mgmt_start: read(pcfinfo) failed, "
- "assume it's "
- "not supported, pcf settings ignored.\n");
- goto pcf_skip;
- }
- if ((msg->cfpollable.data == P80211ENUM_truth_false &&
- msg->cfpollreq.data == P80211ENUM_truth_false) ) {
- pcfinfo->MediumOccupancyLimit = 0;
- pcfinfo->CFPPeriod = 0;
- pcfinfo->CFPMaxDuration = 0;
- pcfinfo->CFPFlags &= host2hfa384x_16((UINT16)~BIT0);
-
- if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok ||
- msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok ) {
- WLAN_LOG_WARNING(
- "Setting cfpperiod or cfpmaxduration when "
- "cfpollable and cfreq are false is pointless.\n");
- }
- }
- if ((msg->cfpollable.data == P80211ENUM_truth_true ||
- msg->cfpollreq.data == P80211ENUM_truth_true) ) {
- if ( msg->cfpollable.data == P80211ENUM_truth_true) {
- pcfinfo->CFPFlags |= host2hfa384x_16((UINT16)BIT0);
- }
-
- if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok) {
- pcfinfo->CFPPeriod = msg->cfpperiod.data;
- pcfinfo->CFPPeriod = host2hfa384x_16(pcfinfo->CFPPeriod);
- }
- if ( msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok) {
- pcfinfo->CFPMaxDuration = msg->cfpmaxduration.data;
- pcfinfo->CFPMaxDuration = host2hfa384x_16(pcfinfo->CFPMaxDuration);
- pcfinfo->MediumOccupancyLimit = pcfinfo->CFPMaxDuration;
- }
- }
- result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFAPPCFINFO,
- pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
if ( result ) {
- WLAN_LOG_ERROR("write(pcfinfo) failed.\n");
+ WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
goto failed;
}
-pcf_skip:
/* Set the macmode so the frame setup code knows what to do */
- if ( msg->bsstype.data == P80211ENUM_bsstype_infrastructure ) {
- wlandev->macmode = WLAN_MACMODE_ESS_AP;
+ if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
+ wlandev->macmode = WLAN_MACMODE_IBSS_STA;
/* lets extend the data length a bit */
hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
}
- /* Set the BSSID to the same as our MAC */
- memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
-
/* Enable the Port */
result = hfa384x_drvr_enable(hw, 0);
if ( result ) {
return result;
}
-
-/*----------------------------------------------------------------
-* prism2mgmt_enable
-*
-* Start a BSS. Any station can do this for IBSS, only AP for ESS.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_enable(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_enable_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* Ad-Hoc not quite supported on Prism2 */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto done;
- }
-
- /*** ACCESS POINT ***/
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /* Is the tertiary loaded? */
- if ( hw->cap_sup_sta.id != 5) {
- WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
- goto failed;
- }
-
- /* Set the macmode so the frame setup code knows what to do */
- wlandev->macmode = WLAN_MACMODE_ESS_AP;
-
- /* Set the BSSID to the same as our MAC */
- memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
-
- /* Enable the Port */
- result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
- goto failed;
- }
-
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- goto done;
-failed:
- msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
-
-done:
- result = 0;
-
- DBFEXIT;
- return result;
-}
-
-
/*----------------------------------------------------------------
* prism2mgmt_readpda
*
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
- if (hw->ap) {
-
- /*** ACCESS POINT ***/
-
- /* Never supported on AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto done;
- }
-
/* Disable the Port */
hfa384x_drvr_disable(hw, 0);
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
-done:
DBFEXIT;
return result;
}
projects / platform / kernel / linux-rpi.git / commitdiff