PCI: Remove unused pci_get_dma_source()
authorAlex Williamson <alex.williamson@redhat.com>
Wed, 17 Sep 2014 16:41:13 +0000 (10:41 -0600)
committerBjorn Helgaas <bhelgaas@google.com>
Mon, 22 Sep 2014 20:48:32 +0000 (14:48 -0600)
pci_get_dma_source() is unused, so remove it.  We now have
dma_alias_devfn() to describe this.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
drivers/pci/quirks.c
include/linux/pci.h

index da062d8..01c935c 100644 (file)
@@ -3514,57 +3514,6 @@ DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias);
 /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */
 DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
 
-static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev)
-{
-       if (!PCI_FUNC(dev->devfn))
-               return pci_dev_get(dev);
-
-       return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
-}
-
-static const struct pci_dev_dma_source {
-       u16 vendor;
-       u16 device;
-       struct pci_dev *(*dma_source)(struct pci_dev *dev);
-} pci_dev_dma_source[] = {
-       /*
-        * https://bugzilla.redhat.com/show_bug.cgi?id=605888
-        *
-        * Some Ricoh devices use the function 0 source ID for DMA on
-        * other functions of a multifunction device.  The DMA devices
-        * is therefore function 0, which will have implications of the
-        * iommu grouping of these devices.
-        */
-       { PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source },
-       { PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source },
-       { PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source },
-       { PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source },
-       { 0 }
-};
-
-/*
- * IOMMUs with isolation capabilities need to be programmed with the
- * correct source ID of a device.  In most cases, the source ID matches
- * the device doing the DMA, but sometimes hardware is broken and will
- * tag the DMA as being sourced from a different device.  This function
- * allows that translation.  Note that the reference count of the
- * returned device is incremented on all paths.
- */
-struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
-{
-       const struct pci_dev_dma_source *i;
-
-       for (i = pci_dev_dma_source; i->dma_source; i++) {
-               if ((i->vendor == dev->vendor ||
-                    i->vendor == (u16)PCI_ANY_ID) &&
-                   (i->device == dev->device ||
-                    i->device == (u16)PCI_ANY_ID))
-                       return i->dma_source(dev);
-       }
-
-       return pci_dev_get(dev);
-}
-
 /*
  * AMD has indicated that the devices below do not support peer-to-peer
  * in any system where they are found in the southbridge with an AMD
index bf5a47c..d68d8e3 100644 (file)
@@ -1557,16 +1557,11 @@ enum pci_fixup_pass {
 
 #ifdef CONFIG_PCI_QUIRKS
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
-struct pci_dev *pci_get_dma_source(struct pci_dev *dev);
 int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
 void pci_dev_specific_enable_acs(struct pci_dev *dev);
 #else
 static inline void pci_fixup_device(enum pci_fixup_pass pass,
                                    struct pci_dev *dev) { }
-static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
-{
-       return pci_dev_get(dev);
-}
 static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
                                               u16 acs_flags)
 {