Convert CONFIG_ENV_RANGE to Kconfig

This converts the following to Kconfig:
   CONFIG_ENV_RANGE

Now that this is in Kconfig we can enforce a minimum size and so remove
the check in C code to ensure range is larger than size.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/configs/P1010RDB-PA_36BIT_NAND_defconfig b/configs/P1010RDB-PA_36BIT_NAND_defconfig
index 989b897..d1de705 100644 (file)
--- a/configs/P1010RDB-PA_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig
@@ -68,6 +68,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig
index 16e9165..eaa9efc 100644 (file)
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@@ -67,6 +67,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P1010RDB-PB_36BIT_NAND_defconfig b/configs/P1010RDB-PB_36BIT_NAND_defconfig
index 1ba6d20..7a55298 100644 (file)
--- a/configs/P1010RDB-PB_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig
@@ -69,6 +69,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P1010RDB-PB_NAND_defconfig b/configs/P1010RDB-PB_NAND_defconfig
index 2dc3847..b85d14a 100644 (file)
--- a/configs/P1010RDB-PB_NAND_defconfig
+++ b/configs/P1010RDB-PB_NAND_defconfig
@@ -68,6 +68,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig
index 5315efa..3b320bc 100644 (file)
--- a/configs/P1020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig
@@ -68,6 +68,7 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig
index 80ca03c..d77c3ed 100644 (file)
--- a/configs/P1020RDB-PC_NAND_defconfig
+++ b/configs/P1020RDB-PC_NAND_defconfig
@@ -67,6 +67,7 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P1020RDB-PD_NAND_defconfig b/configs/P1020RDB-PD_NAND_defconfig
index 7b1809b..f92e3f0 100644 (file)
--- a/configs/P1020RDB-PD_NAND_defconfig
+++ b/configs/P1020RDB-PD_NAND_defconfig
@@ -70,6 +70,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ec000000.nor:128k(dtb),6016k(kernel),57088k(fs
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x60000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P2020RDB-PC_36BIT_NAND_defconfig b/configs/P2020RDB-PC_36BIT_NAND_defconfig
index 18ece21..91ebd89 100644 (file)
--- a/configs/P2020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P2020RDB-PC_36BIT_NAND_defconfig
@@ -72,6 +72,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=fef000000.nor:256k(vsc7385-firmware),256k(dtb)
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig
index e6cd51c..5a62055 100644 (file)
--- a/configs/P2020RDB-PC_NAND_defconfig
+++ b/configs/P2020RDB-PC_NAND_defconfig
@@ -71,6 +71,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ef000000.nor:256k(vsc7385-firmware),256k(dtb),
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"

diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index 750b03b..a4225d8 100644 (file)
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -55,6 +55,7 @@ CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_VERSION_VARIABLE=y

diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index f56064d..15dae6b 100644 (file)
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -56,6 +56,7 @@ CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_IP_DEFRAG=y

diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index d92756f..9dbe628 100644 (file)
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -62,6 +62,7 @@ CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_VERSION_VARIABLE=y

diff --git a/configs/draco_defconfig b/configs/draco_defconfig
index f7bb01f..c137fc7 100644 (file)
--- a/configs/draco_defconfig
+++ b/configs/draco_defconfig
@@ -79,6 +79,7 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RETRY_COUNT=10

diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
index 294a67a..f0b10f0 100644 (file)
--- a/configs/etamin_defconfig
+++ b/configs/etamin_defconfig
@@ -80,6 +80,7 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x200000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RETRY_COUNT=10

diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig
index 2ccea83..2ce0ab9 100644 (file)
--- a/configs/m53menlo_defconfig
+++ b/configs/m53menlo_defconfig
@@ -68,6 +68,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1m(u-boot),512k(env1),512k(env2),-(ub
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y

diff --git a/configs/mx28evk_nand_defconfig b/configs/mx28evk_nand_defconfig
index 6b3235c..136c1d6 100644 (file)
--- a/configs/mx28evk_nand_defconfig
+++ b/configs/mx28evk_nand_defconfig
@@ -43,6 +43,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),5
 CONFIG_CMD_UBI=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y

diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig
index 9f27592..373bca6 100644 (file)
--- a/configs/rastaban_defconfig
+++ b/configs/rastaban_defconfig
@@ -79,6 +79,7 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RETRY_COUNT=10

diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index 57c5218..4e05f71 100644 (file)
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -69,6 +69,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RETRY_COUNT=20

diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig
index 0a6b0e8..6115e9e 100644 (file)
--- a/configs/thuban_defconfig
+++ b/configs/thuban_defconfig
@@ -79,6 +79,7 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RETRY_COUNT=10

diff --git a/configs/vf610twr_nand_defconfig b/configs/vf610twr_nand_defconfig
index f6ed47f..288169c 100644 (file)
--- a/configs/vf610twr_nand_defconfig
+++ b/configs/vf610twr_nand_defconfig
@@ -45,6 +45,7 @@ CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_VYBRID_GPIO=y

diff --git a/env/Kconfig b/env/Kconfig
index 0aed7ae..238e4c7 100644 (file)
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -264,14 +264,6 @@ config ENV_IS_IN_NAND
          during a "saveenv" operation.  CONFIG_ENV_OFFSET_REDUND must be
          aligned to an erase block boundary.
 
-         - CONFIG_ENV_RANGE (optional):
-
-         Specifies the length of the region in which the environment
-         can be written.  This should be a multiple of the NAND device's
-         block size.  Specifying a range with more erase blocks than
-         are needed to hold CONFIG_ENV_SIZE allows bad blocks within
-         the range to be avoided.
-
          - CONFIG_ENV_OFFSET_OOB (optional):
 
          Enables support for dynamically retrieving the offset of the
@@ -280,6 +272,16 @@ config ENV_IS_IN_NAND
          Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
          using CONFIG_ENV_OFFSET_OOB.
 
+config ENV_RANGE
+       hex "Length of the region in which the environment can be written"
+       depends on ENV_IS_IN_NAND
+       range ENV_SIZE 0x7fffffff
+       default ENV_SIZE
+       help
+         This should be a multiple of the NAND device's block size.
+         Specifying a range with more erase blocks than are needed to hold
+         CONFIG_ENV_SIZE allows bad blocks within the range to be avoided.
+
 config ENV_IS_IN_NVRAM
        bool "Environment in a non-volatile RAM"
        depends on !CHAIN_OF_TRUST

diff --git a/env/nand.c b/env/nand.c
index 21aa367..df300b1 100644 (file)
--- a/env/nand.c
+++ b/env/nand.c
@@ -33,10 +33,6 @@
 #error CONFIG_ENV_OFFSET_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_NAND
 #endif
 
-#ifndef CONFIG_ENV_RANGE
-#define CONFIG_ENV_RANGE       CONFIG_ENV_SIZE
-#endif
-
 #if defined(ENV_IS_EMBEDDED)
 static env_t *env_ptr = &environment;
 #elif defined(CONFIG_NAND_ENV_DST)
@@ -201,10 +197,6 @@ static int env_nand_save(void)
 #endif
        };
 
-
-       if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE)
-               return 1;
-
        ret = env_export(env_new);
        if (ret)
                return ret;

diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 27361f2..ad78dba 100644 (file)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -477,12 +477,6 @@ extern unsigned long get_sdram_size(void);
 #elif defined(CONFIG_MTD_RAW_NAND)
 #ifdef CONFIG_TPL_BUILD
 #define SPL_ENV_ADDR           (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
-#else
-#if defined(CONFIG_TARGET_P1010RDB_PA)
-#define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
-#elif defined(CONFIG_TARGET_P1010RDB_PB)
-#define CONFIG_ENV_RANGE       (32 * CONFIG_ENV_SIZE) /* new block size 512K */
-#endif
 #endif
 #endif
 

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 40d145a..bf02061 100644 (file)
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -122,11 +122,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-/* environment organization */
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_RANGE       (4 * CONFIG_ENV_SIZE)
-#endif
-
 #ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1

diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 8e50eea..c8884e6 100644 (file)
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -166,11 +166,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-/* environment organization */
-#if defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_RANGE       (4 * CONFIG_ENV_SIZE)
-#endif
-
 #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 9b1cec5..7d2b7de 100644 (file)
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -91,11 +91,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-/* Environment organization */
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_RANGE               (4 * 64 * 2048)
-#endif
-
 /* USB Host Support */
 
 /* USB DFU */

diff --git a/include/configs/draco.h b/include/configs/draco.h
index 21367f0..4869008 100644 (file)
--- a/include/configs/draco.h
+++ b/include/configs/draco.h
@@ -27,9 +27,6 @@
  /* Physical Memory Map */
 #define CONFIG_MAX_RAM_BANK_SIZE       (1024 << 20)    /* 1GB */
 
-/* Define own nand partitions */
-#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "hostname=draco\0" \

diff --git a/include/configs/etamin.h b/include/configs/etamin.h
index 654bfc6..3acc62d 100644 (file)
--- a/include/configs/etamin.h
+++ b/include/configs/etamin.h
@@ -77,10 +77,6 @@
 
 /* nedded by compliance test in read mode */
 
-/* Define own nand partitions */
-#define CONFIG_ENV_RANGE               (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
-
 #undef COMMON_ENV_DFU_ARGS
 #define COMMON_ENV_DFU_ARGS    "dfu_args=run bootargs_defaults;" \
                                "setenv bootargs ${bootargs};" \

diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index b8ad0c3..1533e57 100644 (file)
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -51,9 +51,6 @@
 #define CONFIG_MXC_NAND_IP_REGS_BASE   NFC_BASE_ADDR
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_MXC_NAND_HWECC
-
-/* Environment is in NAND */
-#define CONFIG_ENV_RANGE               (0x00080000) /* 512 KiB */
 #endif
 
 /*

diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 7a352bd..9f3ac48 100644 (file)
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -15,17 +15,6 @@
 #define PHYS_SDRAM_1_SIZE              0x40000000      /* Max 1 GB RAM */
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 
-/* Environment */
-
-/* Environment is in MMC */
-
-/* Environment is in NAND */
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_RANGE               (512 * 1024)
-#endif
-
-/* Environment is in SPI flash */
-
 /* UBI and NAND partitioning */
 
 /* RTC */

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index f4971a5..6d417c5 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -433,7 +433,6 @@
 #if defined(CONFIG_SDCARD)
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
 #ifdef CONFIG_TPL_BUILD
 #define SPL_ENV_ADDR           (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 #endif

diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h
index 5de980d..49cd11c 100644 (file)
--- a/include/configs/rastaban.h
+++ b/include/configs/rastaban.h
@@ -37,9 +37,6 @@
 #define EEPROM_ADDR_DDR3 0x90
 #define EEPROM_ADDR_CHIP 0x120
 
-/* Define own nand partitions */
-#define CONFIG_ENV_RANGE               (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "hostname=rastaban\0" \

diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 458d22d..da6fb18 100644 (file)
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -88,11 +88,6 @@
 /* General Boot Parameter */
 
 /*
- * The NAND Flash partitions:
- */
-#define CONFIG_ENV_RANGE               (SZ_512K)
-
-/*
  * Predefined environment variables.
  * Usefull to define some easy to use boot commands.
  */

diff --git a/include/configs/thuban.h b/include/configs/thuban.h
index fd90353..696306e 100644 (file)
--- a/include/configs/thuban.h
+++ b/include/configs/thuban.h
@@ -30,9 +30,6 @@
 #define EEPROM_ADDR_DDR3 0x90
 #define EEPROM_ADDR_CHIP 0x120
 
-/* Define own nand partitions */
-#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "hostname=thuban\0" \

diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 6ad1ba9..7f4bfb5 100644 (file)
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -130,8 +130,4 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_RANGE               (512 * 1024)
-#endif
-
 #endif