V4L/DVB (9824): m52790: convert to v4l2_subdev.
authorHans Verkuil <hverkuil@xs4all.nl>
Sat, 29 Nov 2008 15:51:32 +0000 (12:51 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 30 Dec 2008 11:38:39 +0000 (09:38 -0200)
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/m52790.c

index 89a781c..07be14a 100644 (file)
@@ -28,7 +28,7 @@
 #include <linux/i2c-id.h>
 #include <linux/videodev2.h>
 #include <media/m52790.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-i2c-drv.h>
 
@@ -38,89 +38,130 @@ MODULE_LICENSE("GPL");
 
 
 struct m52790_state {
+       struct v4l2_subdev sd;
        u16 input;
        u16 output;
 };
 
+static inline struct m52790_state *to_state(struct v4l2_subdev *sd)
+{
+       return container_of(sd, struct m52790_state, sd);
+}
+
 /* ----------------------------------------------------------------------- */
 
-static int m52790_write(struct i2c_client *client)
+static int m52790_write(struct v4l2_subdev *sd)
 {
-       struct m52790_state *state = i2c_get_clientdata(client);
+       struct m52790_state *state = to_state(sd);
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+
        u8 sw1 = (state->input | state->output) & 0xff;
        u8 sw2 = (state->input | state->output) >> 8;
 
        return i2c_smbus_write_byte_data(client, sw1, sw2);
 }
 
-static int m52790_command(struct i2c_client *client, unsigned int cmd,
-                           void *arg)
+/* Note: audio and video are linked and cannot be switched separately.
+   So audio and video routing commands are identical for this chip.
+   In theory the video amplifier and audio modes could be handled
+   separately for the output, but that seems to be overkill right now.
+   The same holds for implementing an audio mute control, this is now
+   part of the audio output routing. The normal case is that another
+   chip takes care of the actual muting so making it part of the
+   output routing seems to be the right thing to do for now. */
+static int m52790_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
 {
-       struct m52790_state *state = i2c_get_clientdata(client);
-       struct v4l2_routing *route = arg;
-
-       /* Note: audio and video are linked and cannot be switched separately.
-          So audio and video routing commands are identical for this chip.
-          In theory the video amplifier and audio modes could be handled
-          separately for the output, but that seems to be overkill right now.
-          The same holds for implementing an audio mute control, this is now
-          part of the audio output routing. The normal case is that another
-          chip takes care of the actual muting so making it part of the
-          output routing seems to be the right thing to do for now. */
-       switch (cmd) {
-       case VIDIOC_INT_G_AUDIO_ROUTING:
-       case VIDIOC_INT_G_VIDEO_ROUTING:
-               route->input = state->input;
-               route->output = state->output;
-               break;
-
-       case VIDIOC_INT_S_AUDIO_ROUTING:
-       case VIDIOC_INT_S_VIDEO_ROUTING:
-               state->input = route->input;
-               state->output = route->output;
-               m52790_write(client);
-               break;
+       struct m52790_state *state = to_state(sd);
+
+       state->input = route->input;
+       state->output = route->output;
+       m52790_write(sd);
+       return 0;
+}
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-       case VIDIOC_DBG_G_REGISTER:
-       case VIDIOC_DBG_S_REGISTER:
-       {
-               struct v4l2_register *reg = arg;
-
-               if (!v4l2_chip_match_i2c_client(client,
-                                       reg->match_type, reg->match_chip))
-                       return -EINVAL;
-               if (!capable(CAP_SYS_ADMIN))
-                       return -EPERM;
-               if (reg->reg != 0)
-                       return -EINVAL;
-               if (cmd == VIDIOC_DBG_G_REGISTER)
-                       reg->val = state->input | state->output;
-               else {
-                       state->input = reg->val & 0x0303;
-                       state->output = reg->val & ~0x0303;
-                       m52790_write(client);
-               }
-               break;
-       }
-#endif
+static int m52790_g_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
+{
+       struct m52790_state *state = to_state(sd);
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-       case VIDIOC_G_CHIP_IDENT:
-               return v4l2_chip_ident_i2c_client(client, arg,
-                               V4L2_IDENT_M52790, 0);
+       if (!v4l2_chip_match_i2c_client(client,
+                               reg->match_type, reg->match_chip))
+               return -EINVAL;
+       if (!capable(CAP_SYS_ADMIN))
+               return -EPERM;
+       if (reg->reg != 0)
+               return -EINVAL;
+       reg->val = state->input | state->output;
+       return 0;
+}
 
-       case VIDIOC_LOG_STATUS:
-               v4l_info(client, "Switch 1: %02x\n",
-                               (state->input | state->output) & 0xff);
-               v4l_info(client, "Switch 2: %02x\n",
-                               (state->input | state->output) >> 8);
-               break;
+static int m52790_s_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
+{
+       struct m52790_state *state = to_state(sd);
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-       default:
+       if (!v4l2_chip_match_i2c_client(client,
+                               reg->match_type, reg->match_chip))
                return -EINVAL;
-       }
+       if (!capable(CAP_SYS_ADMIN))
+               return -EPERM;
+       if (reg->reg != 0)
+               return -EINVAL;
+       state->input = reg->val & 0x0303;
+       state->output = reg->val & ~0x0303;
+       m52790_write(sd);
        return 0;
 }
+#endif
+
+static int m52790_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+       return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_M52790, 0);
+}
+
+static int m52790_log_status(struct v4l2_subdev *sd)
+{
+       struct m52790_state *state = to_state(sd);
+
+       v4l2_info(sd, "Switch 1: %02x\n",
+                       (state->input | state->output) & 0xff);
+       v4l2_info(sd, "Switch 2: %02x\n",
+                       (state->input | state->output) >> 8);
+       return 0;
+}
+
+static int m52790_command(struct i2c_client *client, unsigned cmd, void *arg)
+{
+       return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops m52790_core_ops = {
+       .log_status = m52790_log_status,
+       .g_chip_ident = m52790_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+       .g_register = m52790_g_register,
+       .s_register = m52790_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_audio_ops m52790_audio_ops = {
+       .s_routing = m52790_s_routing,
+};
+
+static const struct v4l2_subdev_video_ops m52790_video_ops = {
+       .s_routing = m52790_s_routing,
+};
+
+static const struct v4l2_subdev_ops m52790_ops = {
+       .core = &m52790_core_ops,
+       .audio = &m52790_audio_ops,
+       .video = &m52790_video_ops,
+};
 
 /* ----------------------------------------------------------------------- */
 
@@ -130,6 +171,7 @@ static int m52790_probe(struct i2c_client *client,
                        const struct i2c_device_id *id)
 {
        struct m52790_state *state;
+       struct v4l2_subdev *sd;
 
        /* Check if the adapter supports the needed features */
        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -142,16 +184,20 @@ static int m52790_probe(struct i2c_client *client,
        if (state == NULL)
                return -ENOMEM;
 
+       sd = &state->sd;
+       v4l2_i2c_subdev_init(sd, client, &m52790_ops);
        state->input = M52790_IN_TUNER;
        state->output = M52790_OUT_STEREO;
-       i2c_set_clientdata(client, state);
-       m52790_write(client);
+       m52790_write(sd);
        return 0;
 }
 
 static int m52790_remove(struct i2c_client *client)
 {
-       kfree(i2c_get_clientdata(client));
+       struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+       v4l2_device_unregister_subdev(sd);
+       kfree(to_state(sd));
        return 0;
 }