--- /dev/null
+/*
+ * leon_pci_grpci2.c: GRPCI2 Host PCI driver
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ *
+ */
+
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/leon.h>
+#include <asm/vaddrs.h>
+#include <asm/sections.h>
+#include <asm/leon_pci.h>
+
+#include "irq.h"
+
+struct grpci2_barcfg {
+ unsigned long pciadr; /* PCI Space Address */
+ unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */
+};
+
+/* Device Node Configuration options:
+ * - barcfgs : Custom Configuration of Host's 6 target BARs
+ * - irq_mask : Limit which PCI interrupts are enabled
+ * - do_reset : Force PCI Reset on startup
+ *
+ * barcfgs
+ * =======
+ *
+ * Optional custom Target BAR configuration (see struct grpci2_barcfg). All
+ * addresses are physical. Array always contains 6 elements (len=2*4*6 bytes)
+ *
+ * -1 means not configured (let host driver do default setup).
+ *
+ * [i*2+0] = PCI Address of BAR[i] on target interface
+ * [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address
+ *
+ *
+ * irq_mask
+ * ========
+ *
+ * Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default
+ * all are enabled. Use this when PCI interrupt pins are floating on PCB.
+ * int, len=4.
+ * bit0 = PCI INTA#
+ * bit1 = PCI INTB#
+ * bit2 = PCI INTC#
+ * bit3 = PCI INTD#
+ *
+ *
+ * reset
+ * =====
+ *
+ * Force PCI reset on startup. int, len=4
+ */
+
+/* Enable Debugging Configuration Space Access */
+#undef GRPCI2_DEBUG_CFGACCESS
+
+/*
+ * GRPCI2 APB Register MAP
+ */
+struct grpci2_regs {
+ unsigned int ctrl; /* 0x00 Control */
+ unsigned int sts_cap; /* 0x04 Status / Capabilities */
+ int res1; /* 0x08 */
+ unsigned int io_map; /* 0x0C I/O Map address */
+ unsigned int dma_ctrl; /* 0x10 DMA */
+ unsigned int dma_bdbase; /* 0x14 DMA */
+ int res2[2]; /* 0x18 */
+ unsigned int bars[6]; /* 0x20 read-only PCI BARs */
+ int res3[2]; /* 0x38 */
+ unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */
+
+ /* PCI Trace Buffer Registers (OPTIONAL) */
+ unsigned int t_ctrl; /* 0x80 */
+ unsigned int t_cnt; /* 0x84 */
+ unsigned int t_adpat; /* 0x88 */
+ unsigned int t_admask; /* 0x8C */
+ unsigned int t_sigpat; /* 0x90 */
+ unsigned int t_sigmask; /* 0x94 */
+ unsigned int t_adstate; /* 0x98 */
+ unsigned int t_sigstate; /* 0x9C */
+};
+
+#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
+#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
+
+#define CTRL_BUS_BIT 16
+
+#define CTRL_RESET (1<<31)
+#define CTRL_SI (1<<27)
+#define CTRL_PE (1<<26)
+#define CTRL_EI (1<<25)
+#define CTRL_ER (1<<24)
+#define CTRL_BUS (0xff<<CTRL_BUS_BIT)
+#define CTRL_HOSTINT 0xf
+
+#define STS_HOST_BIT 31
+#define STS_MST_BIT 30
+#define STS_TAR_BIT 29
+#define STS_DMA_BIT 28
+#define STS_DI_BIT 27
+#define STS_HI_BIT 26
+#define STS_IRQMODE_BIT 24
+#define STS_TRACE_BIT 23
+#define STS_CFGERRVALID_BIT 20
+#define STS_CFGERR_BIT 19
+#define STS_INTTYPE_BIT 12
+#define STS_INTSTS_BIT 8
+#define STS_FDEPTH_BIT 2
+#define STS_FNUM_BIT 0
+
+#define STS_HOST (1<<STS_HOST_BIT)
+#define STS_MST (1<<STS_MST_BIT)
+#define STS_TAR (1<<STS_TAR_BIT)
+#define STS_DMA (1<<STS_DMA_BIT)
+#define STS_DI (1<<STS_DI_BIT)
+#define STS_HI (1<<STS_HI_BIT)
+#define STS_IRQMODE (0x3<<STS_IRQMODE_BIT)
+#define STS_TRACE (1<<STS_TRACE_BIT)
+#define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT)
+#define STS_CFGERR (1<<STS_CFGERR_BIT)
+#define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT)
+#define STS_INTSTS (0xf<<STS_INTSTS_BIT)
+#define STS_FDEPTH (0x7<<STS_FDEPTH_BIT)
+#define STS_FNUM (0x3<<STS_FNUM_BIT)
+
+#define STS_ISYSERR (1<<17)
+#define STS_IDMA (1<<16)
+#define STS_IDMAERR (1<<15)
+#define STS_IMSTABRT (1<<14)
+#define STS_ITGTABRT (1<<13)
+#define STS_IPARERR (1<<12)
+
+#define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR)
+
+struct grpci2_bd_chan {
+ unsigned int ctrl; /* 0x00 DMA Control */
+ unsigned int nchan; /* 0x04 Next DMA Channel Address */
+ unsigned int nbd; /* 0x08 Next Data Descriptor in chan */
+ unsigned int res; /* 0x0C Reserved */
+};
+
+#define BD_CHAN_EN 0x80000000
+#define BD_CHAN_TYPE 0x00300000
+#define BD_CHAN_BDCNT 0x0000ffff
+#define BD_CHAN_EN_BIT 31
+#define BD_CHAN_TYPE_BIT 20
+#define BD_CHAN_BDCNT_BIT 0
+
+struct grpci2_bd_data {
+ unsigned int ctrl; /* 0x00 DMA Data Control */
+ unsigned int pci_adr; /* 0x04 PCI Start Address */
+ unsigned int ahb_adr; /* 0x08 AHB Start address */
+ unsigned int next; /* 0x0C Next Data Descriptor in chan */
+};
+
+#define BD_DATA_EN 0x80000000
+#define BD_DATA_IE 0x40000000
+#define BD_DATA_DR 0x20000000
+#define BD_DATA_TYPE 0x00300000
+#define BD_DATA_ER 0x00080000
+#define BD_DATA_LEN 0x0000ffff
+#define BD_DATA_EN_BIT 31
+#define BD_DATA_IE_BIT 30
+#define BD_DATA_DR_BIT 29
+#define BD_DATA_TYPE_BIT 20
+#define BD_DATA_ER_BIT 19
+#define BD_DATA_LEN_BIT 0
+
+/* GRPCI2 Capability */
+struct grpci2_cap_first {
+ unsigned int ctrl;
+ unsigned int pci2ahb_map[6];
+ unsigned int ext2ahb_map;
+ unsigned int io_map;
+ unsigned int pcibar_size[6];
+};
+#define CAP9_CTRL_OFS 0
+#define CAP9_BAR_OFS 0x4
+#define CAP9_IOMAP_OFS 0x20
+#define CAP9_BARSIZE_OFS 0x24
+
+struct grpci2_priv {
+ struct leon_pci_info info; /* must be on top of this structure */
+ struct grpci2_regs *regs;
+ char irq;
+ char irq_mode; /* IRQ Mode from CAPSTS REG */
+ char bt_enabled;
+ char do_reset;
+ char irq_mask;
+ u32 pciid; /* PCI ID of Host */
+ unsigned char irq_map[4];
+
+ /* Virtual IRQ numbers */
+ unsigned int virq_err;
+ unsigned int virq_dma;
+
+ /* AHB PCI Windows */
+ unsigned long pci_area; /* MEMORY */
+ unsigned long pci_area_end;
+ unsigned long pci_io; /* I/O */
+ unsigned long pci_conf; /* CONFIGURATION */
+ unsigned long pci_conf_end;
+ unsigned long pci_io_va;
+
+ struct grpci2_barcfg tgtbars[6];
+};
+
+DEFINE_SPINLOCK(grpci2_dev_lock);
+struct grpci2_priv *grpci2priv;
+
+int grpci2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct grpci2_priv *priv = dev->bus->sysdata;
+ int irq_group;
+
+ /* Use default IRQ decoding on PCI BUS0 according slot numbering */
+ irq_group = slot & 0x3;
+ pin = ((pin - 1) + irq_group) & 0x3;
+
+ return priv->irq_map[pin];
+}
+
+static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ unsigned int *pci_conf;
+ unsigned long flags;
+ u32 tmp;
+
+ if (where & 0x3)
+ return -EINVAL;
+
+ if (bus == 0 && PCI_SLOT(devfn) != 0)
+ devfn += (0x8 * 6);
+
+ /* Select bus */
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+ (bus << 16));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+ /* clear old status */
+ REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+ pci_conf = (unsigned int *) (priv->pci_conf |
+ (devfn << 8) | (where & 0xfc));
+ tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
+
+ /* Wait until GRPCI2 signals that CFG access is done, it should be
+ * done instantaneously unless a DMA operation is ongoing...
+ */
+ while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+ ;
+
+ if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) {
+ *val = 0xffffffff;
+ } else {
+ /* Bus always little endian (unaffected by byte-swapping) */
+ *val = flip_dword(tmp);
+ }
+
+ return 0;
+}
+
+static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ u32 v;
+ int ret;
+
+ if (where & 0x1)
+ return -EINVAL;
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ *val = 0xffff & (v >> (8 * (where & 0x3)));
+ return ret;
+}
+
+static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ u32 v;
+ int ret;
+
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ *val = 0xff & (v >> (8 * (where & 3)));
+
+ return ret;
+}
+
+static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ unsigned int *pci_conf;
+ unsigned long flags;
+
+ if (where & 0x3)
+ return -EINVAL;
+
+ if (bus == 0 && PCI_SLOT(devfn) != 0)
+ devfn += (0x8 * 6);
+
+ /* Select bus */
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+ (bus << 16));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+ /* clear old status */
+ REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+ pci_conf = (unsigned int *) (priv->pci_conf |
+ (devfn << 8) | (where & 0xfc));
+ LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val));
+
+ /* Wait until GRPCI2 signals that CFG access is done, it should be
+ * done instantaneously unless a DMA operation is ongoing...
+ */
+ while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+ ;
+
+ return 0;
+}
+
+static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ int ret;
+ u32 v;
+
+ if (where & 0x1)
+ return -EINVAL;
+ ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v);
+ if (ret)
+ return ret;
+ v = (v & ~(0xffff << (8 * (where & 0x3)))) |
+ ((0xffff & val) << (8 * (where & 0x3)));
+ return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ int ret;
+ u32 v;
+
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ if (ret != 0)
+ return ret;
+ v = (v & ~(0xff << (8 * (where & 0x3)))) |
+ ((0xff & val) << (8 * (where & 0x3)));
+ return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+/* Read from Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ unsigned int busno = bus->number;
+ int ret;
+
+ if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+ *val = ~0;
+ return 0;
+ }
+
+ switch (size) {
+ case 1:
+ ret = grpci2_cfg_r8(priv, busno, devfn, where, val);
+ break;
+ case 2:
+ ret = grpci2_cfg_r16(priv, busno, devfn, where, val);
+ break;
+ case 4:
+ ret = grpci2_cfg_r32(priv, busno, devfn, where, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+ printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
+ "size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where,
+ *val, size);
+#endif
+
+ return ret;
+}
+
+/* Write to Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ unsigned int busno = bus->number;
+
+ if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+ return 0;
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+ printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
+ "val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ where, size, val);
+#endif
+
+ switch (size) {
+ default:
+ return -EINVAL;
+ case 1:
+ return grpci2_cfg_w8(priv, busno, devfn, where, val);
+ case 2:
+ return grpci2_cfg_w16(priv, busno, devfn, where, val);
+ case 4:
+ return grpci2_cfg_w32(priv, busno, devfn, where, val);
+ }
+}
+
+static struct pci_ops grpci2_ops = {
+ .read = grpci2_read_config,
+ .write = grpci2_write_config,
+};
+
+/* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration
+ * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
+ * this is not needed and the standard IRQ controller can be used.
+ */
+
+static void grpci2_mask_irq(struct irq_data *data)
+{
+ unsigned long flags;
+ unsigned int irqidx;
+ struct grpci2_priv *priv = grpci2priv;
+
+ irqidx = (unsigned int)data->chip_data - 1;
+ if (irqidx > 3) /* only mask PCI interrupts here */
+ return;
+
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static void grpci2_unmask_irq(struct irq_data *data)
+{
+ unsigned long flags;
+ unsigned int irqidx;
+ struct grpci2_priv *priv = grpci2priv;
+
+ irqidx = (unsigned int)data->chip_data - 1;
+ if (irqidx > 3) /* only unmask PCI interrupts here */
+ return;
+
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static unsigned int grpci2_startup_irq(struct irq_data *data)
+{
+ grpci2_unmask_irq(data);
+ return 0;
+}
+
+static void grpci2_shutdown_irq(struct irq_data *data)
+{
+ grpci2_mask_irq(data);
+}
+
+static struct irq_chip grpci2_irq = {
+ .name = "grpci2",
+ .irq_startup = grpci2_startup_irq,
+ .irq_shutdown = grpci2_shutdown_irq,
+ .irq_mask = grpci2_mask_irq,
+ .irq_unmask = grpci2_unmask_irq,
+};
+
+/* Handle one or multiple IRQs from the PCI core */
+static void grpci2_pci_flow_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ int i, ack = 0;
+ unsigned int ctrl, sts_cap, pci_ints;
+
+ ctrl = REGLOAD(priv->regs->ctrl);
+ sts_cap = REGLOAD(priv->regs->sts_cap);
+
+ /* Error Interrupt? */
+ if (sts_cap & STS_ERR_IRQ) {
+ generic_handle_irq(priv->virq_err);
+ ack = 1;
+ }
+
+ /* PCI Interrupt? */
+ pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT;
+ if (pci_ints) {
+ /* Call respective PCI Interrupt handler */
+ for (i = 0; i < 4; i++) {
+ if (pci_ints & (1 << i))
+ generic_handle_irq(priv->irq_map[i]);
+ }
+ ack = 1;
+ }
+
+ /*
+ * Decode DMA Interrupt only when shared with Err and PCI INTX#, when
+ * the DMA is a unique IRQ the DMA interrupts doesn't end up here, they
+ * goes directly to DMA ISR.
+ */
+ if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) {
+ generic_handle_irq(priv->virq_dma);
+ ack = 1;
+ }
+
+ /*
+ * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
+ * Controller, this must be done after IRQ sources have been handled to
+ * avoid double IRQ generation
+ */
+ if (ack)
+ desc->irq_data.chip->irq_eoi(&desc->irq_data);
+}
+
+/* Create a virtual IRQ */
+static unsigned int grpci2_build_device_irq(unsigned int irq)
+{
+ unsigned int virq = 0, pil;
+
+ pil = 1 << 8;
+ virq = irq_alloc(irq, pil);
+ if (virq == 0)
+ goto out;
+
+ irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq,
+ "pcilvl");
+ irq_set_chip_data(virq, (void *)irq);
+
+out:
+ return virq;
+}
+
+void grpci2_hw_init(struct grpci2_priv *priv)
+{
+ u32 ahbadr, pciadr, bar_sz, capptr, io_map, data;
+ struct grpci2_regs *regs = priv->regs;
+ int i;
+ struct grpci2_barcfg *barcfg = priv->tgtbars;
+
+ /* Reset any earlier setup */
+ if (priv->do_reset) {
+ printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
+ REGSTORE(regs->ctrl, CTRL_RESET);
+ ssleep(1); /* Wait for boards to settle */
+ }
+ REGSTORE(regs->ctrl, 0);
+ REGSTORE(regs->sts_cap, ~0); /* Clear Status */
+ REGSTORE(regs->dma_ctrl, 0);
+ REGSTORE(regs->dma_bdbase, 0);
+
+ /* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
+ REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff);
+
+ /* set 1:1 mapping between AHB -> PCI memory space, for all Masters
+ * Each AHB master has it's own mapping registers. Max 16 AHB masters.
+ */
+ for (i = 0; i < 16; i++)
+ REGSTORE(regs->ahbmst_map[i], priv->pci_area);
+
+ /* Get the GRPCI2 Host PCI ID */
+ grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+
+ /* Get address to first (always defined) capability structure */
+ grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+
+ /* Enable/Disable Byte twisting */
+ grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+ io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+
+ /* Setup the Host's PCI Target BARs for other peripherals to access,
+ * and do DMA to the host's memory. The target BARs can be sized and
+ * enabled individually.
+ *
+ * User may set custom target BARs, but default is:
+ * The first BARs is used to map kernel low (DMA is part of normal
+ * region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the
+ * PCI bus, the other BARs are disabled. We assume that the first BAR
+ * is always available.
+ */
+ for (i = 0; i < 6; i++) {
+ if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) {
+ /* Target BARs must have the proper alignment */
+ ahbadr = barcfg[i].ahbadr;
+ pciadr = barcfg[i].pciadr;
+ bar_sz = ((pciadr - 1) & ~pciadr) + 1;
+ } else {
+ if (i == 0) {
+ /* Map main memory */
+ bar_sz = 0xf0000008; /* 256MB prefetchable */
+ ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN(
+ (unsigned long) &_end));
+ pciadr = ahbadr;
+ } else {
+ bar_sz = 0;
+ ahbadr = 0;
+ pciadr = 0;
+ }
+ }
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
+ grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+ printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
+ i, pciadr, ahbadr);
+ }
+
+ /* set as bus master and enable pci memory responses */
+ grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+
+ /* Enable Error respone (CPU-TRAP) on illegal memory access. */
+ REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
+}
+
+static irqreturn_t grpci2_jump_interrupt(int irq, void *arg)
+{
+ printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
+ return IRQ_NONE;
+}
+
+/* Handle GRPCI2 Error Interrupt */
+static irqreturn_t grpci2_err_interrupt(int irq, void *arg)
+{
+ struct grpci2_priv *priv = arg;
+ struct grpci2_regs *regs = priv->regs;
+ unsigned int status;
+
+ status = REGLOAD(regs->sts_cap);
+ if ((status & STS_ERR_IRQ) == 0)
+ return IRQ_NONE;
+
+ if (status & STS_IPARERR)
+ printk(KERN_ERR "GRPCI2: Parity Error\n");
+
+ if (status & STS_ITGTABRT)
+ printk(KERN_ERR "GRPCI2: Target Abort\n");
+
+ if (status & STS_IMSTABRT)
+ printk(KERN_ERR "GRPCI2: Master Abort\n");
+
+ if (status & STS_ISYSERR)
+ printk(KERN_ERR "GRPCI2: System Error\n");
+
+ /* Clear handled INT TYPE IRQs */
+ REGSTORE(regs->sts_cap, status & STS_ERR_IRQ);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit grpci2_of_probe(struct platform_device *ofdev)
+{
+ struct grpci2_regs *regs;
+ struct grpci2_priv *priv;
+ int err, i, len;
+ const int *tmp;
+ unsigned int capability;
+
+ if (grpci2priv) {
+ printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
+ return -ENODEV;
+ }
+
+ if (ofdev->num_resources < 3) {
+ printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
+ return -EIO;
+ }
+
+ /* Find Device Address */
+ regs = of_ioremap(&ofdev->resource[0], 0,
+ resource_size(&ofdev->resource[0]),
+ "grlib-grpci2 regs");
+ if (regs == NULL) {
+ printk(KERN_ERR "GRPCI2: ioremap failed\n");
+ return -EIO;
+ }
+
+ /*
+ * Check that we're in Host Slot and that we can act as a Host Bridge
+ * and not only as target.
+ */
+ capability = REGLOAD(regs->sts_cap);
+ if ((capability & STS_HOST) || !(capability & STS_MST)) {
+ printk(KERN_INFO "GRPCI2: not in host system slot\n");
+ err = -EIO;
+ goto err1;
+ }
+
+ priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL);
+ if (grpci2priv == NULL) {
+ err = -ENOMEM;
+ goto err1;
+ }
+ memset(grpci2priv, 0, sizeof(*grpci2priv));
+ priv->regs = regs;
+ priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */
+ priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT;
+
+ printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
+
+ /* Byte twisting should be made configurable from kernel command line */
+ priv->bt_enabled = 1;
+
+ /* Let user do custom Target BAR assignment */
+ tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len);
+ if (tmp && (len == 2*4*6))
+ memcpy(priv->tgtbars, tmp, 2*4*6);
+ else
+ memset(priv->tgtbars, -1, 2*4*6);
+
+ /* Limit IRQ unmasking in irq_mode 2 and 3 */
+ tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len);
+ if (tmp && (len == 4))
+ priv->do_reset = *tmp;
+ else
+ priv->irq_mask = 0xf;
+
+ /* Optional PCI reset. Force PCI reset on startup */
+ tmp = of_get_property(ofdev->dev.of_node, "reset", &len);
+ if (tmp && (len == 4))
+ priv->do_reset = *tmp;
+ else
+ priv->do_reset = 0;
+
+ /* Find PCI Memory, I/O and Configuration Space Windows */
+ priv->pci_area = ofdev->resource[1].start;
+ priv->pci_area_end = ofdev->resource[1].end+1;
+ priv->pci_io = ofdev->resource[2].start;
+ priv->pci_conf = ofdev->resource[2].start + 0x10000;
+ priv->pci_conf_end = priv->pci_conf + 0x10000;
+ priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
+ if (!priv->pci_io_va) {
+ err = -EIO;
+ goto err2;
+ }
+
+ printk(KERN_INFO
+ "GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
+ " I/O SPACE [0x%08lx - 0x%08lx]\n"
+ " CONFIG SPACE [0x%08lx - 0x%08lx]\n",
+ priv->pci_area, priv->pci_area_end-1,
+ priv->pci_io, priv->pci_conf-1,
+ priv->pci_conf, priv->pci_conf_end-1);
+
+ /*
+ * I/O Space resources in I/O Window mapped into Virtual Adr Space
+ * We never use low 4KB because some devices seem have problems using
+ * address 0.
+ */
+ memset(&priv->info.io_space, 0, sizeof(struct resource));
+ priv->info.io_space.name = "GRPCI2 PCI I/O Space";
+ priv->info.io_space.start = priv->pci_io_va + 0x1000;
+ priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
+ priv->info.io_space.flags = IORESOURCE_IO;
+
+ /*
+ * GRPCI2 has no prefetchable memory, map everything as
+ * non-prefetchable memory
+ */
+ memset(&priv->info.mem_space, 0, sizeof(struct resource));
+ priv->info.mem_space.name = "GRPCI2 PCI MEM Space";
+ priv->info.mem_space.start = priv->pci_area;
+ priv->info.mem_space.end = priv->pci_area_end - 1;
+ priv->info.mem_space.flags = IORESOURCE_MEM;
+
+ if (request_resource(&iomem_resource, &priv->info.mem_space) < 0)
+ goto err3;
+ if (request_resource(&ioport_resource, &priv->info.io_space) < 0)
+ goto err4;
+
+ grpci2_hw_init(priv);
+
+ /*
+ * Get PCI Interrupt to System IRQ mapping and setup IRQ handling
+ * Error IRQ always on PCI INTA.
+ */
+ if (priv->irq_mode < 2) {
+ /* All PCI interrupts are shared using the same system IRQ */
+ leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq,
+ "pcilvl", 0);
+
+ priv->irq_map[0] = grpci2_build_device_irq(1);
+ priv->irq_map[1] = grpci2_build_device_irq(2);
+ priv->irq_map[2] = grpci2_build_device_irq(3);
+ priv->irq_map[3] = grpci2_build_device_irq(4);
+
+ priv->virq_err = grpci2_build_device_irq(5);
+ if (priv->irq_mode & 1)
+ priv->virq_dma = ofdev->archdata.irqs[1];
+ else
+ priv->virq_dma = grpci2_build_device_irq(6);
+
+ /* Enable IRQs on LEON IRQ controller */
+ err = request_irq(priv->irq, grpci2_jump_interrupt, 0,
+ "GRPCI2_JUMP", priv);
+ if (err)
+ printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
+ } else {
+ /* All PCI interrupts have an unique IRQ interrupt */
+ for (i = 0; i < 4; i++) {
+ /* Make LEON IRQ layer handle level IRQ by acking */
+ leon_update_virq_handling(ofdev->archdata.irqs[i],
+ handle_fasteoi_irq, "pcilvl",
+ 1);
+ priv->irq_map[i] = ofdev->archdata.irqs[i];
+ }
+ priv->virq_err = priv->irq_map[0];
+ if (priv->irq_mode & 1)
+ priv->virq_dma = ofdev->archdata.irqs[4];
+ else
+ priv->virq_dma = priv->irq_map[0];
+
+ /* Unmask all PCI interrupts, request_irq will not do that */
+ REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf));
+ }
+
+ /* Setup IRQ handler for non-configuration space access errors */
+ err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED,
+ "GRPCI2_ERR", priv);
+ if (err) {
+ printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
+ goto err5;
+ }
+
+ /*
+ * Enable Error Interrupts. PCI interrupts are unmasked once request_irq
+ * is called by the PCI Device drivers
+ */
+ REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI);
+
+ /* Init common layer and scan buses */
+ priv->info.ops = &grpci2_ops;
+ priv->info.map_irq = grpci2_map_irq;
+ leon_pci_init(ofdev, &priv->info);
+
+ return 0;
+
+err5:
+ release_resource(&priv->info.io_space);
+err4:
+ release_resource(&priv->info.mem_space);
+err3:
+ err = -ENOMEM;
+ iounmap((void *)priv->pci_io_va);
+err2:
+ kfree(priv);
+err1:
+ of_iounmap(&ofdev->resource[0], regs,
+ resource_size(&ofdev->resource[0]));
+ return err;
+}
+
+static struct of_device_id grpci2_of_match[] = {
+ {
+ .name = "GAISLER_GRPCI2",
+ },
+ {
+ .name = "01_07c",
+ },
+ {},
+};
+
+static struct platform_driver grpci2_of_driver = {
+ .driver = {
+ .name = "grpci2",
+ .owner = THIS_MODULE,
+ .of_match_table = grpci2_of_match,
+ },
+ .probe = grpci2_of_probe,
+};
+
+static int __init grpci2_init(void)
+{
+ return platform_driver_register(&grpci2_of_driver);
+}
+
+subsys_initcall(grpci2_init);
projects / profile / common / kernel-common.git / commitdiff