drm/i915: Check backlight type while doing eDP backlight initializaiton
authorLee Shawn C <shawn.c.lee@intel.com>
Thu, 20 Jun 2019 15:44:16 +0000 (08:44 -0700)
committerJani Nikula <jani.nikula@intel.com>
Wed, 26 Jun 2019 14:48:12 +0000 (17:48 +0300)
If LFP backlight type setting from VBT was "VESA eDP AUX Interface".
Driver should check panel capability and try to initialize aux backlight.
No matter i915_modparams.enable_dpcd_backlight was enabled or not.

v2: access dev_priv->vbt.backlight.type directly and remove unused function.
v3: 1. Modify i915.enable_dpcd_backlight type from bool to int and give default
       value as 0 (disable).
    2. Add a judgement to check LFP backlight type was aux interface or not.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1561045456-12171-1-git-send-email-shawn.c.lee@intel.com
drivers/gpu/drm/i915/display/intel_bios.h
drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
drivers/gpu/drm/i915/i915_params.c
drivers/gpu/drm/i915/i915_params.h

index 4e42cfa..0b7be63 100644 (file)
@@ -42,6 +42,7 @@ enum intel_backlight_type {
        INTEL_BACKLIGHT_DISPLAY_DDI,
        INTEL_BACKLIGHT_DSI_DCS,
        INTEL_BACKLIGHT_PANEL_DRIVER_INTERFACE,
+       INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE,
 };
 
 struct edp_power_seq {
index 7ded95a..6b0b734 100644 (file)
@@ -264,8 +264,11 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
 int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 {
        struct intel_panel *panel = &intel_connector->panel;
+       struct drm_i915_private *dev_priv = to_i915(intel_connector->base.dev);
 
-       if (!i915_modparams.enable_dpcd_backlight)
+       if (i915_modparams.enable_dpcd_backlight == 0 ||
+           (i915_modparams.enable_dpcd_backlight == -1 &&
+           dev_priv->vbt.backlight.type != INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE))
                return -ENODEV;
 
        if (!intel_dp_aux_display_control_capable(intel_connector))
index 5b07766..296452f 100644 (file)
@@ -169,8 +169,9 @@ i915_param_named_unsafe(inject_load_failure, uint, 0400,
        "Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
 #endif
 
-i915_param_named(enable_dpcd_backlight, bool, 0600,
-       "Enable support for DPCD backlight control (default:false)");
+i915_param_named(enable_dpcd_backlight, int, 0600,
+       "Enable support for DPCD backlight control"
+       "(-1=use per-VBT LFP backlight type setting, 0=disabled [default], 1=enabled)");
 
 #if IS_ENABLED(CONFIG_DRM_I915_GVT)
 i915_param_named(enable_gvt, bool, 0400,
index a4770ce..d29ade3 100644 (file)
@@ -64,6 +64,7 @@ struct drm_printer;
        param(int, reset, 2) \
        param(unsigned int, inject_load_failure, 0) \
        param(int, fastboot, -1) \
+       param(int, enable_dpcd_backlight, 0) \
        param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE) \
        /* leave bools at the end to not create holes */ \
        param(bool, alpha_support, IS_ENABLED(CONFIG_DRM_I915_ALPHA_SUPPORT)) \
@@ -76,7 +77,6 @@ struct drm_printer;
        param(bool, verbose_state_checks, true) \
        param(bool, nuclear_pageflip, false) \
        param(bool, enable_dp_mst, true) \
-       param(bool, enable_dpcd_backlight, false) \
        param(bool, enable_gvt, false)
 
 #define MEMBER(T, member, ...) T member;